Just lifted my Jeep. now I cant get into 4wd
07-04-2005, 12:48 PM
#1
Guest
Posts: n/a
Just lifted my Jeep. now I cant get into 4wd
Hey guys, quick question.
Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd (or
neutral for that matter). The guy who did the lift at the offroad shop said
it was a simple fix with a 13mm wrench, but he is not ehre today and I was
wondering if i could do it myself.
Any ideas?
Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd (or
neutral for that matter). The guy who did the lift at the offroad shop said
it was a simple fix with a 13mm wrench, but he is not ehre today and I was
wondering if i could do it myself.
Any ideas?
07-04-2005, 01:56 PM
#2
Guest
Posts: n/a
Re: Just lifted my Jeep. now I cant get into 4wd
You can absolutely do it yourself... Chock up the wheels, apply the E-brake
and make sure she isn't gonna move. Then crawl under there w/ the 13mm
wrench. Have someone sit in the jeep and move the t-case shifter. You'll see
the bracket and bolt you need to adjust moving/ The adjustment is REALLY
easy once you see what it's doing.
It's kinda tough to explain where the lever is, which is why I say have
someone move the t-case shifter while you look.
Loosen that bolt, move it to where it needs to be and tighten it back up.
Take it for a spin down the block and see if you got it right... (you
probably will).
n.
I'm go look for a picture...
"Brett Little" <brett.little@gmail.com> wrote in message
news:yLdye.78258$j51.68589@tornado.texas.rr.com...
> Hey guys, quick question.
>
> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd (or
> neutral for that matter). The guy who did the lift at the offroad shop
> said it was a simple fix with a 13mm wrench, but he is not ehre today and
> I was wondering if i could do it myself.
>
> Any ideas?
>
and make sure she isn't gonna move. Then crawl under there w/ the 13mm
wrench. Have someone sit in the jeep and move the t-case shifter. You'll see
the bracket and bolt you need to adjust moving/ The adjustment is REALLY
easy once you see what it's doing.
It's kinda tough to explain where the lever is, which is why I say have
someone move the t-case shifter while you look.
Loosen that bolt, move it to where it needs to be and tighten it back up.
Take it for a spin down the block and see if you got it right... (you
probably will).
n.
I'm go look for a picture...
"Brett Little" <brett.little@gmail.com> wrote in message
news:yLdye.78258$j51.68589@tornado.texas.rr.com...
> Hey guys, quick question.
>
> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd (or
> neutral for that matter). The guy who did the lift at the offroad shop
> said it was a simple fix with a 13mm wrench, but he is not ehre today and
> I was wondering if i could do it myself.
>
> Any ideas?
>
07-04-2005, 01:56 PM
#3
Guest
Posts: n/a
Re: Just lifted my Jeep. now I cant get into 4wd
You can absolutely do it yourself... Chock up the wheels, apply the E-brake
and make sure she isn't gonna move. Then crawl under there w/ the 13mm
wrench. Have someone sit in the jeep and move the t-case shifter. You'll see
the bracket and bolt you need to adjust moving/ The adjustment is REALLY
easy once you see what it's doing.
It's kinda tough to explain where the lever is, which is why I say have
someone move the t-case shifter while you look.
Loosen that bolt, move it to where it needs to be and tighten it back up.
Take it for a spin down the block and see if you got it right... (you
probably will).
n.
I'm go look for a picture...
"Brett Little" <brett.little@gmail.com> wrote in message
news:yLdye.78258$j51.68589@tornado.texas.rr.com...
> Hey guys, quick question.
>
> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd (or
> neutral for that matter). The guy who did the lift at the offroad shop
> said it was a simple fix with a 13mm wrench, but he is not ehre today and
> I was wondering if i could do it myself.
>
> Any ideas?
>
and make sure she isn't gonna move. Then crawl under there w/ the 13mm
wrench. Have someone sit in the jeep and move the t-case shifter. You'll see
the bracket and bolt you need to adjust moving/ The adjustment is REALLY
easy once you see what it's doing.
It's kinda tough to explain where the lever is, which is why I say have
someone move the t-case shifter while you look.
Loosen that bolt, move it to where it needs to be and tighten it back up.
Take it for a spin down the block and see if you got it right... (you
probably will).
n.
I'm go look for a picture...
"Brett Little" <brett.little@gmail.com> wrote in message
news:yLdye.78258$j51.68589@tornado.texas.rr.com...
> Hey guys, quick question.
>
> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd (or
> neutral for that matter). The guy who did the lift at the offroad shop
> said it was a simple fix with a 13mm wrench, but he is not ehre today and
> I was wondering if i could do it myself.
>
> Any ideas?
>
07-04-2005, 01:56 PM
#4
Guest
Posts: n/a
Re: Just lifted my Jeep. now I cant get into 4wd
You can absolutely do it yourself... Chock up the wheels, apply the E-brake
and make sure she isn't gonna move. Then crawl under there w/ the 13mm
wrench. Have someone sit in the jeep and move the t-case shifter. You'll see
the bracket and bolt you need to adjust moving/ The adjustment is REALLY
easy once you see what it's doing.
It's kinda tough to explain where the lever is, which is why I say have
someone move the t-case shifter while you look.
Loosen that bolt, move it to where it needs to be and tighten it back up.
Take it for a spin down the block and see if you got it right... (you
probably will).
n.
I'm go look for a picture...
"Brett Little" <brett.little@gmail.com> wrote in message
news:yLdye.78258$j51.68589@tornado.texas.rr.com...
> Hey guys, quick question.
>
> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd (or
> neutral for that matter). The guy who did the lift at the offroad shop
> said it was a simple fix with a 13mm wrench, but he is not ehre today and
> I was wondering if i could do it myself.
>
> Any ideas?
>
and make sure she isn't gonna move. Then crawl under there w/ the 13mm
wrench. Have someone sit in the jeep and move the t-case shifter. You'll see
the bracket and bolt you need to adjust moving/ The adjustment is REALLY
easy once you see what it's doing.
It's kinda tough to explain where the lever is, which is why I say have
someone move the t-case shifter while you look.
Loosen that bolt, move it to where it needs to be and tighten it back up.
Take it for a spin down the block and see if you got it right... (you
probably will).
n.
I'm go look for a picture...
"Brett Little" <brett.little@gmail.com> wrote in message
news:yLdye.78258$j51.68589@tornado.texas.rr.com...
> Hey guys, quick question.
>
> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd (or
> neutral for that matter). The guy who did the lift at the offroad shop
> said it was a simple fix with a 13mm wrench, but he is not ehre today and
> I was wondering if i could do it myself.
>
> Any ideas?
>
07-04-2005, 01:56 PM
#5
Guest
Posts: n/a
Re: Just lifted my Jeep. now I cant get into 4wd
You can absolutely do it yourself... Chock up the wheels, apply the E-brake
and make sure she isn't gonna move. Then crawl under there w/ the 13mm
wrench. Have someone sit in the jeep and move the t-case shifter. You'll see
the bracket and bolt you need to adjust moving/ The adjustment is REALLY
easy once you see what it's doing.
It's kinda tough to explain where the lever is, which is why I say have
someone move the t-case shifter while you look.
Loosen that bolt, move it to where it needs to be and tighten it back up.
Take it for a spin down the block and see if you got it right... (you
probably will).
n.
I'm go look for a picture...
"Brett Little" <brett.little@gmail.com> wrote in message
news:yLdye.78258$j51.68589@tornado.texas.rr.com...
> Hey guys, quick question.
>
> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd (or
> neutral for that matter). The guy who did the lift at the offroad shop
> said it was a simple fix with a 13mm wrench, but he is not ehre today and
> I was wondering if i could do it myself.
>
> Any ideas?
>
and make sure she isn't gonna move. Then crawl under there w/ the 13mm
wrench. Have someone sit in the jeep and move the t-case shifter. You'll see
the bracket and bolt you need to adjust moving/ The adjustment is REALLY
easy once you see what it's doing.
It's kinda tough to explain where the lever is, which is why I say have
someone move the t-case shifter while you look.
Loosen that bolt, move it to where it needs to be and tighten it back up.
Take it for a spin down the block and see if you got it right... (you
probably will).
n.
I'm go look for a picture...
"Brett Little" <brett.little@gmail.com> wrote in message
news:yLdye.78258$j51.68589@tornado.texas.rr.com...
> Hey guys, quick question.
>
> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd (or
> neutral for that matter). The guy who did the lift at the offroad shop
> said it was a simple fix with a 13mm wrench, but he is not ehre today and
> I was wondering if i could do it myself.
>
> Any ideas?
>
07-04-2005, 02:19 PM
#6
Guest
Posts: n/a
Re: Just lifted my Jeep. now I cant get into 4wd
I couldn't find a picture online and I hate doing things half way, so...
Here's a road map.
http://www.users.qwest.net/~b-otis/shift%20linkage/
n.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:CLeye.1418$CA.4533@news.uswest.net...
> You can absolutely do it yourself... Chock up the wheels, apply the
> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
> You'll see the bracket and bolt you need to adjust moving/ The adjustment
> is REALLY easy once you see what it's doing.
>
> It's kinda tough to explain where the lever is, which is why I say have
> someone move the t-case shifter while you look.
>
> Loosen that bolt, move it to where it needs to be and tighten it back up.
> Take it for a spin down the block and see if you got it right... (you
> probably will).
> n.
>
> I'm go look for a picture...
>
>
> "Brett Little" <brett.little@gmail.com> wrote in message
> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>> Hey guys, quick question.
>>
>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>> (or neutral for that matter). The guy who did the lift at the offroad
>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>> today and I was wondering if i could do it myself.
>>
>> Any ideas?
>>
>
>
Here's a road map.
http://www.users.qwest.net/~b-otis/shift%20linkage/
n.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:CLeye.1418$CA.4533@news.uswest.net...
> You can absolutely do it yourself... Chock up the wheels, apply the
> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
> You'll see the bracket and bolt you need to adjust moving/ The adjustment
> is REALLY easy once you see what it's doing.
>
> It's kinda tough to explain where the lever is, which is why I say have
> someone move the t-case shifter while you look.
>
> Loosen that bolt, move it to where it needs to be and tighten it back up.
> Take it for a spin down the block and see if you got it right... (you
> probably will).
> n.
>
> I'm go look for a picture...
>
>
> "Brett Little" <brett.little@gmail.com> wrote in message
> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>> Hey guys, quick question.
>>
>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>> (or neutral for that matter). The guy who did the lift at the offroad
>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>> today and I was wondering if i could do it myself.
>>
>> Any ideas?
>>
>
>
07-04-2005, 02:19 PM
#7
Guest
Posts: n/a
Re: Just lifted my Jeep. now I cant get into 4wd
I couldn't find a picture online and I hate doing things half way, so...
Here's a road map.
http://www.users.qwest.net/~b-otis/shift%20linkage/
n.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:CLeye.1418$CA.4533@news.uswest.net...
> You can absolutely do it yourself... Chock up the wheels, apply the
> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
> You'll see the bracket and bolt you need to adjust moving/ The adjustment
> is REALLY easy once you see what it's doing.
>
> It's kinda tough to explain where the lever is, which is why I say have
> someone move the t-case shifter while you look.
>
> Loosen that bolt, move it to where it needs to be and tighten it back up.
> Take it for a spin down the block and see if you got it right... (you
> probably will).
> n.
>
> I'm go look for a picture...
>
>
> "Brett Little" <brett.little@gmail.com> wrote in message
> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>> Hey guys, quick question.
>>
>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>> (or neutral for that matter). The guy who did the lift at the offroad
>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>> today and I was wondering if i could do it myself.
>>
>> Any ideas?
>>
>
>
Here's a road map.
http://www.users.qwest.net/~b-otis/shift%20linkage/
n.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:CLeye.1418$CA.4533@news.uswest.net...
> You can absolutely do it yourself... Chock up the wheels, apply the
> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
> You'll see the bracket and bolt you need to adjust moving/ The adjustment
> is REALLY easy once you see what it's doing.
>
> It's kinda tough to explain where the lever is, which is why I say have
> someone move the t-case shifter while you look.
>
> Loosen that bolt, move it to where it needs to be and tighten it back up.
> Take it for a spin down the block and see if you got it right... (you
> probably will).
> n.
>
> I'm go look for a picture...
>
>
> "Brett Little" <brett.little@gmail.com> wrote in message
> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>> Hey guys, quick question.
>>
>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>> (or neutral for that matter). The guy who did the lift at the offroad
>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>> today and I was wondering if i could do it myself.
>>
>> Any ideas?
>>
>
>
07-04-2005, 02:19 PM
#8
Guest
Posts: n/a
Re: Just lifted my Jeep. now I cant get into 4wd
I couldn't find a picture online and I hate doing things half way, so...
Here's a road map.
http://www.users.qwest.net/~b-otis/shift%20linkage/
n.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:CLeye.1418$CA.4533@news.uswest.net...
> You can absolutely do it yourself... Chock up the wheels, apply the
> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
> You'll see the bracket and bolt you need to adjust moving/ The adjustment
> is REALLY easy once you see what it's doing.
>
> It's kinda tough to explain where the lever is, which is why I say have
> someone move the t-case shifter while you look.
>
> Loosen that bolt, move it to where it needs to be and tighten it back up.
> Take it for a spin down the block and see if you got it right... (you
> probably will).
> n.
>
> I'm go look for a picture...
>
>
> "Brett Little" <brett.little@gmail.com> wrote in message
> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>> Hey guys, quick question.
>>
>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>> (or neutral for that matter). The guy who did the lift at the offroad
>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>> today and I was wondering if i could do it myself.
>>
>> Any ideas?
>>
>
>
Here's a road map.
http://www.users.qwest.net/~b-otis/shift%20linkage/
n.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:CLeye.1418$CA.4533@news.uswest.net...
> You can absolutely do it yourself... Chock up the wheels, apply the
> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
> You'll see the bracket and bolt you need to adjust moving/ The adjustment
> is REALLY easy once you see what it's doing.
>
> It's kinda tough to explain where the lever is, which is why I say have
> someone move the t-case shifter while you look.
>
> Loosen that bolt, move it to where it needs to be and tighten it back up.
> Take it for a spin down the block and see if you got it right... (you
> probably will).
> n.
>
> I'm go look for a picture...
>
>
> "Brett Little" <brett.little@gmail.com> wrote in message
> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>> Hey guys, quick question.
>>
>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>> (or neutral for that matter). The guy who did the lift at the offroad
>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>> today and I was wondering if i could do it myself.
>>
>> Any ideas?
>>
>
>
07-04-2005, 02:19 PM
#9
Guest
Posts: n/a
Re: Just lifted my Jeep. now I cant get into 4wd
I couldn't find a picture online and I hate doing things half way, so...
Here's a road map.
http://www.users.qwest.net/~b-otis/shift%20linkage/
n.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:CLeye.1418$CA.4533@news.uswest.net...
> You can absolutely do it yourself... Chock up the wheels, apply the
> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
> You'll see the bracket and bolt you need to adjust moving/ The adjustment
> is REALLY easy once you see what it's doing.
>
> It's kinda tough to explain where the lever is, which is why I say have
> someone move the t-case shifter while you look.
>
> Loosen that bolt, move it to where it needs to be and tighten it back up.
> Take it for a spin down the block and see if you got it right... (you
> probably will).
> n.
>
> I'm go look for a picture...
>
>
> "Brett Little" <brett.little@gmail.com> wrote in message
> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>> Hey guys, quick question.
>>
>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>> (or neutral for that matter). The guy who did the lift at the offroad
>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>> today and I was wondering if i could do it myself.
>>
>> Any ideas?
>>
>
>
Here's a road map.
http://www.users.qwest.net/~b-otis/shift%20linkage/
n.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:CLeye.1418$CA.4533@news.uswest.net...
> You can absolutely do it yourself... Chock up the wheels, apply the
> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
> You'll see the bracket and bolt you need to adjust moving/ The adjustment
> is REALLY easy once you see what it's doing.
>
> It's kinda tough to explain where the lever is, which is why I say have
> someone move the t-case shifter while you look.
>
> Loosen that bolt, move it to where it needs to be and tighten it back up.
> Take it for a spin down the block and see if you got it right... (you
> probably will).
> n.
>
> I'm go look for a picture...
>
>
> "Brett Little" <brett.little@gmail.com> wrote in message
> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>> Hey guys, quick question.
>>
>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>> (or neutral for that matter). The guy who did the lift at the offroad
>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>> today and I was wondering if i could do it myself.
>>
>> Any ideas?
>>
>
>
07-04-2005, 02:27 PM
#10
Guest
Posts: n/a
Re: Just lifted my Jeep. now I cant get into 4wd
Wow youre a lifesaver! Thanks a bunch. Im going out there right now to do
it!
Before I purchased the lift I wouldnt have had any confidence to do this
myself. When it was being installed at the shop, I helped the guy out
because I wanted to learn (not to mention he was giving me a discount on
labor). Im just an 18 year old kid that should know more about my Jeep. I
saved my money since Feb. for this thing and the last few days have been the
best learning experience for me.
Now for another question: Is it possible to purchase an adjustable rear
trac bar? I need to adjust it cause the drivers side rear tire is rubbing
on the coil spring just a little when i hit bumps and such. The reason for
this is mainly because I am using the stock wheels, which I shouldnt be
(they are the next thing on my list once I get the money).
Thanks a bunch guys!
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:L4fye.1985$CA.4847@news.uswest.net...
>I couldn't find a picture online and I hate doing things half way, so...
>Here's a road map.
>
> http://www.users.qwest.net/~b-otis/shift%20linkage/
> n.
>
> "Nathan Otis" <na@SPAM.smeat.net> wrote in message
> news:CLeye.1418$CA.4533@news.uswest.net...
>> You can absolutely do it yourself... Chock up the wheels, apply the
>> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
>> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
>> You'll see the bracket and bolt you need to adjust moving/ The adjustment
>> is REALLY easy once you see what it's doing.
>>
>> It's kinda tough to explain where the lever is, which is why I say have
>> someone move the t-case shifter while you look.
>>
>> Loosen that bolt, move it to where it needs to be and tighten it back up.
>> Take it for a spin down the block and see if you got it right... (you
>> probably will).
>> n.
>>
>> I'm go look for a picture...
>>
>>
>> "Brett Little" <brett.little@gmail.com> wrote in message
>> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>>> Hey guys, quick question.
>>>
>>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>>> (or neutral for that matter). The guy who did the lift at the offroad
>>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>>> today and I was wondering if i could do it myself.
>>>
>>> Any ideas?
>>>
>>
>>
>
>
it!
Before I purchased the lift I wouldnt have had any confidence to do this
myself. When it was being installed at the shop, I helped the guy out
because I wanted to learn (not to mention he was giving me a discount on
labor). Im just an 18 year old kid that should know more about my Jeep. I
saved my money since Feb. for this thing and the last few days have been the
best learning experience for me.
Now for another question: Is it possible to purchase an adjustable rear
trac bar? I need to adjust it cause the drivers side rear tire is rubbing
on the coil spring just a little when i hit bumps and such. The reason for
this is mainly because I am using the stock wheels, which I shouldnt be
(they are the next thing on my list once I get the money).
Thanks a bunch guys!
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:L4fye.1985$CA.4847@news.uswest.net...
>I couldn't find a picture online and I hate doing things half way, so...
>Here's a road map.
>
> http://www.users.qwest.net/~b-otis/shift%20linkage/
> n.
>
> "Nathan Otis" <na@SPAM.smeat.net> wrote in message
> news:CLeye.1418$CA.4533@news.uswest.net...
>> You can absolutely do it yourself... Chock up the wheels, apply the
>> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
>> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
>> You'll see the bracket and bolt you need to adjust moving/ The adjustment
>> is REALLY easy once you see what it's doing.
>>
>> It's kinda tough to explain where the lever is, which is why I say have
>> someone move the t-case shifter while you look.
>>
>> Loosen that bolt, move it to where it needs to be and tighten it back up.
>> Take it for a spin down the block and see if you got it right... (you
>> probably will).
>> n.
>>
>> I'm go look for a picture...
>>
>>
>> "Brett Little" <brett.little@gmail.com> wrote in message
>> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>>> Hey guys, quick question.
>>>
>>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>>> (or neutral for that matter). The guy who did the lift at the offroad
>>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>>> today and I was wondering if i could do it myself.
>>>
>>> Any ideas?
>>>
>>
>>
>
>