Adjusting Bestop soft upper doors fit?
Guest
Posts: n/a
Adjusting Bestop soft upper doors fit?
I recently purchased some Bestop soft upper doors based on their claim
"fits original soft top". Well the truth is they seem to sit too far
forward on my half doors. The weather stripping does not even make
contact with the plastic window frames from the top curve all the way
down to the door leaving a 1/4" gap. The front canvas somewhat overlaps
the windshield frame as well.
I thought I read once that when the soft upper doors are installed at
the Jeep factory, the frames are bent by hand to assure a weather tight
fit for each individual Jeep. Anybody ever heard of this? I'm not crazy
about trying to custom bend my new $250 frame posts, I wish I could just
swap the skins onto my old frames, The original factory windows fit and
sealed perfectly.
Rich M
98TJ
"fits original soft top". Well the truth is they seem to sit too far
forward on my half doors. The weather stripping does not even make
contact with the plastic window frames from the top curve all the way
down to the door leaving a 1/4" gap. The front canvas somewhat overlaps
the windshield frame as well.
I thought I read once that when the soft upper doors are installed at
the Jeep factory, the frames are bent by hand to assure a weather tight
fit for each individual Jeep. Anybody ever heard of this? I'm not crazy
about trying to custom bend my new $250 frame posts, I wish I could just
swap the skins onto my old frames, The original factory windows fit and
sealed perfectly.
Rich M
98TJ
Guest
Posts: n/a
Re: Adjusting Bestop soft upper doors fit?
On Sat, 22 Jan 2005 14:14:28 -0500, Rich M <rich@ikillspammers.com>
wrote:
>I recently purchased some Bestop soft upper doors based on their claim
>"fits original soft top". Well the truth is they seem to sit too far
>forward on my half doors. The weather stripping does not even make
>contact with the plastic window frames from the top curve all the way
>down to the door leaving a 1/4" gap. The front canvas somewhat overlaps
>the windshield frame as well.
>
>I thought I read once that when the soft upper doors are installed at
>the Jeep factory, the frames are bent by hand to assure a weather tight
>fit for each individual Jeep. Anybody ever heard of this? I'm not crazy
>about trying to custom bend my new $250 frame posts, I wish I could just
>swap the skins onto my old frames, The original factory windows fit and
>sealed perfectly.
>
>Rich M
>98TJ
wrote:
>I recently purchased some Bestop soft upper doors based on their claim
>"fits original soft top". Well the truth is they seem to sit too far
>forward on my half doors. The weather stripping does not even make
>contact with the plastic window frames from the top curve all the way
>down to the door leaving a 1/4" gap. The front canvas somewhat overlaps
>the windshield frame as well.
>
>I thought I read once that when the soft upper doors are installed at
>the Jeep factory, the frames are bent by hand to assure a weather tight
>fit for each individual Jeep. Anybody ever heard of this? I'm not crazy
>about trying to custom bend my new $250 frame posts, I wish I could just
>swap the skins onto my old frames, The original factory windows fit and
>sealed perfectly.
>
>Rich M
>98TJ
Guest
Posts: n/a
Re: Adjusting Bestop soft upper doors fit?
On Sat, 22 Jan 2005 14:14:28 -0500, Rich M <rich@ikillspammers.com>
wrote:
>I recently purchased some Bestop soft upper doors based on their claim
>"fits original soft top". Well the truth is they seem to sit too far
>forward on my half doors. The weather stripping does not even make
>contact with the plastic window frames from the top curve all the way
>down to the door leaving a 1/4" gap. The front canvas somewhat overlaps
>the windshield frame as well.
>
>I thought I read once that when the soft upper doors are installed at
>the Jeep factory, the frames are bent by hand to assure a weather tight
>fit for each individual Jeep. Anybody ever heard of this? I'm not crazy
>about trying to custom bend my new $250 frame posts, I wish I could just
>swap the skins onto my old frames, The original factory windows fit and
>sealed perfectly.
>
>Rich M
>98TJ
wrote:
>I recently purchased some Bestop soft upper doors based on their claim
>"fits original soft top". Well the truth is they seem to sit too far
>forward on my half doors. The weather stripping does not even make
>contact with the plastic window frames from the top curve all the way
>down to the door leaving a 1/4" gap. The front canvas somewhat overlaps
>the windshield frame as well.
>
>I thought I read once that when the soft upper doors are installed at
>the Jeep factory, the frames are bent by hand to assure a weather tight
>fit for each individual Jeep. Anybody ever heard of this? I'm not crazy
>about trying to custom bend my new $250 frame posts, I wish I could just
>swap the skins onto my old frames, The original factory windows fit and
>sealed perfectly.
>
>Rich M
>98TJ
Guest
Posts: n/a
Re: Adjusting Bestop soft upper doors fit?
On Sat, 22 Jan 2005 14:14:28 -0500, Rich M <rich@ikillspammers.com>
wrote:
>I recently purchased some Bestop soft upper doors based on their claim
>"fits original soft top". Well the truth is they seem to sit too far
>forward on my half doors. The weather stripping does not even make
>contact with the plastic window frames from the top curve all the way
>down to the door leaving a 1/4" gap. The front canvas somewhat overlaps
>the windshield frame as well.
>
>I thought I read once that when the soft upper doors are installed at
>the Jeep factory, the frames are bent by hand to assure a weather tight
>fit for each individual Jeep. Anybody ever heard of this? I'm not crazy
>about trying to custom bend my new $250 frame posts, I wish I could just
>swap the skins onto my old frames, The original factory windows fit and
>sealed perfectly.
>
>Rich M
>98TJ
wrote:
>I recently purchased some Bestop soft upper doors based on their claim
>"fits original soft top". Well the truth is they seem to sit too far
>forward on my half doors. The weather stripping does not even make
>contact with the plastic window frames from the top curve all the way
>down to the door leaving a 1/4" gap. The front canvas somewhat overlaps
>the windshield frame as well.
>
>I thought I read once that when the soft upper doors are installed at
>the Jeep factory, the frames are bent by hand to assure a weather tight
>fit for each individual Jeep. Anybody ever heard of this? I'm not crazy
>about trying to custom bend my new $250 frame posts, I wish I could just
>swap the skins onto my old frames, The original factory windows fit and
>sealed perfectly.
>
>Rich M
>98TJ
Thread
Thread Starter
Forum
Replies
Last Post
Endo
Jeep Mailing List
0
Jul 12, 2005 09:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)