On Wed, 31 Mar 2004 15:54:51 -0500, Mike Romain <romainm@sympatico.ca>
wrote:


>I don't know the Weber idle control.
>
>'Most' Idle controls I am familiar with just open the throttle butterfly
>plate. This won't dump gas. What does yours do, is it a jet or
>something?

>Someone with a Weber can take over from here, I am out of ideas.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's

I've got a Weber sitting in my shed, waiting on time for install -
idle is just a screw against the butterfly linkage -
are you maybe confusing the idle speed screw with the rich/lean
screws? If you are talking about the screw on the side of the carb,
where the throttle linkage is connected (where you can give the
car gas by hand under the hood) turn it until you are happy with
the idle, that's what it's there for. The linkage could be just a
little bent, and need a little more screw in than normal.
If they were all the same, wouldn't be a screw there! :)
Tookie - Denham Springs, LA
88YJ, 4" lift, 33" TSLs, Lock-Rights
PosiLock, 4.10s

 

Tookie wrote:

> On Wed, 31 Mar 2004 15:54:51 -0500, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>
>>I don't know the Weber idle control.
>>
>>'Most' Idle controls I am familiar with just open the throttle butterfly
>>plate. This won't dump gas. What does yours do, is it a jet or
>>something?
>
>>Someone with a Weber can take over from here, I am out of ideas.
>>
>>Mike
>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>88 Cherokee 235 BFG AT's
>
> I've got a Weber sitting in my shed, waiting on time for install -
> idle is just a screw against the butterfly linkage -
> are you maybe confusing the idle speed screw with the rich/lean
> screws? If you are talking about the screw on the side of the carb,
> where the throttle linkage is connected (where you can give the
> car gas by hand under the hood) turn it until you are happy with
> the idle, that's what it's there for. The linkage could be just a
> little bent, and need a little more screw in than normal.
> If they were all the same, wouldn't be a screw there! :)


Yeah, that's kinda thought. Oh well, I'm going to run it with a high enough
idle and just live with it!

Thanks.

 

Tookie wrote:

> On Wed, 31 Mar 2004 15:54:51 -0500, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>
>>I don't know the Weber idle control.
>>
>>'Most' Idle controls I am familiar with just open the throttle butterfly
>>plate. This won't dump gas. What does yours do, is it a jet or
>>something?
>
>>Someone with a Weber can take over from here, I am out of ideas.
>>
>>Mike
>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>88 Cherokee 235 BFG AT's
>
> I've got a Weber sitting in my shed, waiting on time for install -
> idle is just a screw against the butterfly linkage -
> are you maybe confusing the idle speed screw with the rich/lean
> screws? If you are talking about the screw on the side of the carb,
> where the throttle linkage is connected (where you can give the
> car gas by hand under the hood) turn it until you are happy with
> the idle, that's what it's there for. The linkage could be just a
> little bent, and need a little more screw in than normal.
> If they were all the same, wouldn't be a screw there! :)


Yeah, that's kinda thought. Oh well, I'm going to run it with a high enough
idle and just live with it!

Thanks.

 

Tookie wrote:

> On Wed, 31 Mar 2004 15:54:51 -0500, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>
>>I don't know the Weber idle control.
>>
>>'Most' Idle controls I am familiar with just open the throttle butterfly
>>plate. This won't dump gas. What does yours do, is it a jet or
>>something?
>
>>Someone with a Weber can take over from here, I am out of ideas.
>>
>>Mike
>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>88 Cherokee 235 BFG AT's
>
> I've got a Weber sitting in my shed, waiting on time for install -
> idle is just a screw against the butterfly linkage -
> are you maybe confusing the idle speed screw with the rich/lean
> screws? If you are talking about the screw on the side of the carb,
> where the throttle linkage is connected (where you can give the
> car gas by hand under the hood) turn it until you are happy with
> the idle, that's what it's there for. The linkage could be just a
> little bent, and need a little more screw in than normal.
> If they were all the same, wouldn't be a screw there! :)


Yeah, that's kinda thought. Oh well, I'm going to run it with a high enough
idle and just live with it!

Thanks.

 

Tookie wrote:

> On Wed, 31 Mar 2004 15:54:51 -0500, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>
>>I don't know the Weber idle control.
>>
>>'Most' Idle controls I am familiar with just open the throttle butterfly
>>plate. This won't dump gas. What does yours do, is it a jet or
>>something?
>
>>Someone with a Weber can take over from here, I am out of ideas.
>>
>>Mike
>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>88 Cherokee 235 BFG AT's
>
> I've got a Weber sitting in my shed, waiting on time for install -
> idle is just a screw against the butterfly linkage -
> are you maybe confusing the idle speed screw with the rich/lean
> screws? If you are talking about the screw on the side of the carb,
> where the throttle linkage is connected (where you can give the
> car gas by hand under the hood) turn it until you are happy with
> the idle, that's what it's there for. The linkage could be just a
> little bent, and need a little more screw in than normal.
> If they were all the same, wouldn't be a screw there! :)


Yeah, that's kinda thought. Oh well, I'm going to run it with a high enough
idle and just live with it!

Thanks.