Windshield wiper motor removal?
hey, im having a bit of trouble trying to figure out how to remove the wiper motor in my 88 wrangler, if im not mistaken its on the drivers side mounted in the top of the dash covered by a cover bearing the cars VIN.
if so, im having trouble removing it, i assumed that i have to tear off the dash to do this , im just hoping you guys could give me a few tips and info. GREATLY appreciated! thanks Adam |
Re: Windshield wiper motor removal?
88 wrangler
Removal First off disconnect the negative cable from the battery Calk mark the wiper arm to spindle relationship After marking the position , grasp the wiper arm, insert a ice pick in to release clip hole and pull the arm assembly off the spindle Remove the hold down bolts at the corners & fold the windshield forward, out of the way Remove the wiper motor screws or bolts. Grasp the motor securely, lift it out through the access hole and detach the drive arm by prying it off the pivot DO NOT REMOVE THE PIVOT NUT On models with intermit wipers remove the 2 screws & detach the wiper module from the instrument panel. Reach up under the instrument panel in the passengers compartment and unplug the motor electrical connector, then remove the wiper motor from the vehicle. You might want to invest $10-15 bucks max at Cdn Tire and buy a Jeep Wrangler 1987 thru 2007 all models HAYNES manual number 50030 on pages 12-14 and 12-15 with diagrams it shows you how to do all this. |
Re: Windshield wiper motor removal?
Thanks a ton man, very well explained , yea im going to pick up one of those tomorrow , i want to get this done asap.
Greatly appreciated |
All times are GMT -4. The time now is 05:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands