ax15 swap using 94-up bellhousing
 

hey, i've already done the ax15 swap into my 88 yj, using a 92 doner i had kickin around. i'm in the middle of a 101" wheelbase build and will be swapping out the drivetrain. i'll be removing my modded pilot bearing, as i don't really trust it and recently found the the proper pilot bushing..... anyways, was wondering if anyone knows what parts i'll need to swap out the 92 bellhousing to that of a 94-up. seems they have an external slave instead of the hydraulic throwout bearing.

Re: ax15 swap using 94-up bellhousing
 

I have a 95 YJ setup on my CJ ...

I used ; the bell housing , slave cylinder and fork ....
I guess you could get the whole thing from a donor

Dan

Re: ax15 swap using 94-up bellhousing
 

and the T.O bearing i assume?