All electrical geniuses out there, can I replace my existing factory fog/driving lights and use the factory relay, wiring, switch ( on the end of the signal lever), or do I need to rewire the whole shebang? The replacement fixtures are 55w.


Thanks,
Regards

 

If the replacement fixtures are 55w then you don't have to change anything. The stock bulbs are 55w

 

If you wanted to go bigger, use the factory wiring/switch to drive the coil of a relay, and draw your power from the battery (with inline fuse) for the contacts.

I am using the factory switch to control my four 100 watt off road lights.