|
Re: YJ seats???
Oh thanks.. somehow I missed this post (did not referesh). Do you happen to know if the seat backs on the TJ seats go up any higher than the fixed position on the YJ seats? cheers On Jan 24, 11:58 pm, MikeChamb...@webtv.net (Mike chambers) wrote: > They will work . You may have to make a new bracket but they will fit. > My 87 Yj's seats where trashed . So i made some brackets out of flat > steel and grade 8 bolts and mounted a set i had out of a CJ5 i picked up > out of a guy's yard. > They are getting shot so I've been have ass looking for some new one's > Not bad on short trips but any thing over an hour and back and butt > feel it. > > Later Mike |
Re: YJ seats???
You should be testing them out....
I for one cannot fit into the early TJ seats. The backs are made for small people and I am 6'4". To change the position of the back of my CJ seats, all I would need would be a few washers under the back two mounting bolts. This would change the seat bottom too though. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) tina.knowlan@gmail.com wrote: > Oh thanks.. somehow I missed this post (did not referesh). Do you > happen to know if the seat backs on the TJ seats go up any higher than > the fixed position on the YJ seats? > cheers > On Jan 24, 11:58 pm, MikeChamb...@webtv.net (Mike chambers) wrote: >> They will work . You may have to make a new bracket but they will fit. >> My 87 Yj's seats where trashed . So i made some brackets out of flat >> steel and grade 8 bolts and mounted a set i had out of a CJ5 i picked up >> out of a guy's yard. >> They are getting shot so I've been have ass looking for some new one's >> Not bad on short trips but any thing over an hour and back and butt >> feel it. >> >> Later Mike > |
Re: YJ seats???
You should be testing them out....
I for one cannot fit into the early TJ seats. The backs are made for small people and I am 6'4". To change the position of the back of my CJ seats, all I would need would be a few washers under the back two mounting bolts. This would change the seat bottom too though. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) tina.knowlan@gmail.com wrote: > Oh thanks.. somehow I missed this post (did not referesh). Do you > happen to know if the seat backs on the TJ seats go up any higher than > the fixed position on the YJ seats? > cheers > On Jan 24, 11:58 pm, MikeChamb...@webtv.net (Mike chambers) wrote: >> They will work . You may have to make a new bracket but they will fit. >> My 87 Yj's seats where trashed . So i made some brackets out of flat >> steel and grade 8 bolts and mounted a set i had out of a CJ5 i picked up >> out of a guy's yard. >> They are getting shot so I've been have ass looking for some new one's >> Not bad on short trips but any thing over an hour and back and butt >> feel it. >> >> Later Mike > |
Re: YJ seats???
You should be testing them out....
I for one cannot fit into the early TJ seats. The backs are made for small people and I am 6'4". To change the position of the back of my CJ seats, all I would need would be a few washers under the back two mounting bolts. This would change the seat bottom too though. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) tina.knowlan@gmail.com wrote: > Oh thanks.. somehow I missed this post (did not referesh). Do you > happen to know if the seat backs on the TJ seats go up any higher than > the fixed position on the YJ seats? > cheers > On Jan 24, 11:58 pm, MikeChamb...@webtv.net (Mike chambers) wrote: >> They will work . You may have to make a new bracket but they will fit. >> My 87 Yj's seats where trashed . So i made some brackets out of flat >> steel and grade 8 bolts and mounted a set i had out of a CJ5 i picked up >> out of a guy's yard. >> They are getting shot so I've been have ass looking for some new one's >> Not bad on short trips but any thing over an hour and back and butt >> feel it. >> >> Later Mike > |
Re: YJ seats???
You should be testing them out....
I for one cannot fit into the early TJ seats. The backs are made for small people and I am 6'4". To change the position of the back of my CJ seats, all I would need would be a few washers under the back two mounting bolts. This would change the seat bottom too though. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) tina.knowlan@gmail.com wrote: > Oh thanks.. somehow I missed this post (did not referesh). Do you > happen to know if the seat backs on the TJ seats go up any higher than > the fixed position on the YJ seats? > cheers > On Jan 24, 11:58 pm, MikeChamb...@webtv.net (Mike chambers) wrote: >> They will work . You may have to make a new bracket but they will fit. >> My 87 Yj's seats where trashed . So i made some brackets out of flat >> steel and grade 8 bolts and mounted a set i had out of a CJ5 i picked up >> out of a guy's yard. >> They are getting shot so I've been have ass looking for some new one's >> Not bad on short trips but any thing over an hour and back and butt >> feel it. >> >> Later Mike > |
Re: YJ seats???
AHh. the TJ seat are smaller. Which is PERFECT for me. My problem I'm
having is that the fixed position of the YJ seat is a bit too reclined for me to reach the shifter comfortably. this vehicle is clearly not ergonomically designed for a 5'4" woman.I thought of the washer idea, but i am concerned that in tipping the seat-back up, the seat front will tip down and feel a bit like i am slipping out of the seat. I am also worreid that in raising the seat, it will make it that much more difficult to get out from behind the wheel. Ideally, tilt steering and a reclining seat back would make my drive more enjoyable. Does anyone know if tilt steering is available on YJ????? I need a new column anyway On Jan 25, 9:57 am, Mike Romain <roma...@sympatico.ca> wrote: > You should be testing them out.... > > I for one cannot fit into the early TJ seats. The backs are made for > small people and I am 6'4". > > To change the position of the back of my CJ seats, all I would need > would be a few washers under the back two mounting bolts. This would > change the seat bottom too though. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > Canadian Off Road Trips Photos: Non members can still view! > Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 > (More Off Road album links at bottom of the view page) > > > > tina.know...@gmail.com wrote: > > Oh thanks.. somehow I missed this post (did not referesh). Do you > > happen to know if the seat backs on the TJ seats go up any higher than > > the fixed position on the YJ seats? > > cheers > > On Jan 24, 11:58 pm, MikeChamb...@webtv.net (Mike chambers) wrote: > >> They will work . You may have to make a new bracket but they will fit. > >> My 87 Yj's seats where trashed . So i made some brackets out of flat > >> steel and grade 8 bolts and mounted a set i had out of a CJ5 i picked up > >> out of a guy's yard. > >> They are getting shot so I've been have ass looking for some new one's > >> Not bad on short trips but any thing over an hour and back and butt > >> feel it. > > >> Later Mike- Hide quoted text -- Show quoted text - |
Re: YJ seats???
AHh. the TJ seat are smaller. Which is PERFECT for me. My problem I'm
having is that the fixed position of the YJ seat is a bit too reclined for me to reach the shifter comfortably. this vehicle is clearly not ergonomically designed for a 5'4" woman.I thought of the washer idea, but i am concerned that in tipping the seat-back up, the seat front will tip down and feel a bit like i am slipping out of the seat. I am also worreid that in raising the seat, it will make it that much more difficult to get out from behind the wheel. Ideally, tilt steering and a reclining seat back would make my drive more enjoyable. Does anyone know if tilt steering is available on YJ????? I need a new column anyway On Jan 25, 9:57 am, Mike Romain <roma...@sympatico.ca> wrote: > You should be testing them out.... > > I for one cannot fit into the early TJ seats. The backs are made for > small people and I am 6'4". > > To change the position of the back of my CJ seats, all I would need > would be a few washers under the back two mounting bolts. This would > change the seat bottom too though. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > Canadian Off Road Trips Photos: Non members can still view! > Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 > (More Off Road album links at bottom of the view page) > > > > tina.know...@gmail.com wrote: > > Oh thanks.. somehow I missed this post (did not referesh). Do you > > happen to know if the seat backs on the TJ seats go up any higher than > > the fixed position on the YJ seats? > > cheers > > On Jan 24, 11:58 pm, MikeChamb...@webtv.net (Mike chambers) wrote: > >> They will work . You may have to make a new bracket but they will fit. > >> My 87 Yj's seats where trashed . So i made some brackets out of flat > >> steel and grade 8 bolts and mounted a set i had out of a CJ5 i picked up > >> out of a guy's yard. > >> They are getting shot so I've been have ass looking for some new one's > >> Not bad on short trips but any thing over an hour and back and butt > >> feel it. > > >> Later Mike- Hide quoted text -- Show quoted text - |
Re: YJ seats???
AHh. the TJ seat are smaller. Which is PERFECT for me. My problem I'm
having is that the fixed position of the YJ seat is a bit too reclined for me to reach the shifter comfortably. this vehicle is clearly not ergonomically designed for a 5'4" woman.I thought of the washer idea, but i am concerned that in tipping the seat-back up, the seat front will tip down and feel a bit like i am slipping out of the seat. I am also worreid that in raising the seat, it will make it that much more difficult to get out from behind the wheel. Ideally, tilt steering and a reclining seat back would make my drive more enjoyable. Does anyone know if tilt steering is available on YJ????? I need a new column anyway On Jan 25, 9:57 am, Mike Romain <roma...@sympatico.ca> wrote: > You should be testing them out.... > > I for one cannot fit into the early TJ seats. The backs are made for > small people and I am 6'4". > > To change the position of the back of my CJ seats, all I would need > would be a few washers under the back two mounting bolts. This would > change the seat bottom too though. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > Canadian Off Road Trips Photos: Non members can still view! > Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 > (More Off Road album links at bottom of the view page) > > > > tina.know...@gmail.com wrote: > > Oh thanks.. somehow I missed this post (did not referesh). Do you > > happen to know if the seat backs on the TJ seats go up any higher than > > the fixed position on the YJ seats? > > cheers > > On Jan 24, 11:58 pm, MikeChamb...@webtv.net (Mike chambers) wrote: > >> They will work . You may have to make a new bracket but they will fit. > >> My 87 Yj's seats where trashed . So i made some brackets out of flat > >> steel and grade 8 bolts and mounted a set i had out of a CJ5 i picked up > >> out of a guy's yard. > >> They are getting shot so I've been have ass looking for some new one's > >> Not bad on short trips but any thing over an hour and back and butt > >> feel it. > > >> Later Mike- Hide quoted text -- Show quoted text - |
Re: YJ seats???
AHh. the TJ seat are smaller. Which is PERFECT for me. My problem I'm
having is that the fixed position of the YJ seat is a bit too reclined for me to reach the shifter comfortably. this vehicle is clearly not ergonomically designed for a 5'4" woman.I thought of the washer idea, but i am concerned that in tipping the seat-back up, the seat front will tip down and feel a bit like i am slipping out of the seat. I am also worreid that in raising the seat, it will make it that much more difficult to get out from behind the wheel. Ideally, tilt steering and a reclining seat back would make my drive more enjoyable. Does anyone know if tilt steering is available on YJ????? I need a new column anyway On Jan 25, 9:57 am, Mike Romain <roma...@sympatico.ca> wrote: > You should be testing them out.... > > I for one cannot fit into the early TJ seats. The backs are made for > small people and I am 6'4". > > To change the position of the back of my CJ seats, all I would need > would be a few washers under the back two mounting bolts. This would > change the seat bottom too though. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > Canadian Off Road Trips Photos: Non members can still view! > Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 > (More Off Road album links at bottom of the view page) > > > > tina.know...@gmail.com wrote: > > Oh thanks.. somehow I missed this post (did not referesh). Do you > > happen to know if the seat backs on the TJ seats go up any higher than > > the fixed position on the YJ seats? > > cheers > > On Jan 24, 11:58 pm, MikeChamb...@webtv.net (Mike chambers) wrote: > >> They will work . You may have to make a new bracket but they will fit. > >> My 87 Yj's seats where trashed . So i made some brackets out of flat > >> steel and grade 8 bolts and mounted a set i had out of a CJ5 i picked up > >> out of a guy's yard. > >> They are getting shot so I've been have ass looking for some new one's > >> Not bad on short trips but any thing over an hour and back and butt > >> feel it. > > >> Later Mike- Hide quoted text -- Show quoted text - |
Re: YJ seats???
The steering column should be a standard 'Saganaw' column. These are
used in full sized GM vehicles and some small mid size like Acadians or Chevettes. Camaros used them too. A full sized GM van or pickup also. By the by my 5'2" wife likes to use a obusform seat back because it moves her just that little forward so she can reach easier. You could also maybe reposition the seat on the track to get it a bit more forward. Mike tinak wrote: > AHh. the TJ seat are smaller. Which is PERFECT for me. My problem I'm > having is that the fixed position of the YJ seat is a bit too reclined > for me to reach the shifter comfortably. this vehicle is clearly not > ergonomically designed for a 5'4" woman.I thought of the washer idea, > but i am concerned that in tipping the seat-back up, the seat front > will tip down and feel a bit like i am slipping out of the seat. I am > also worreid that in raising the seat, it will make it that much more > difficult to get out from behind the wheel. > Ideally, tilt steering and a reclining seat back would make my drive > more enjoyable. Does anyone know if tilt steering is available on > YJ????? I need a new column anyway > > On Jan 25, 9:57 am, Mike Romain <roma...@sympatico.ca> wrote: >> You should be testing them out.... >> >> I for one cannot fit into the early TJ seats. The backs are made for >> small people and I am 6'4". >> >> To change the position of the back of my CJ seats, all I would need >> would be a few washers under the back two mounting bolts. This would >> change the seat bottom too though. >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 >> (More Off Road album links at bottom of the view page) >> >> >> >> tina.know...@gmail.com wrote: >>> Oh thanks.. somehow I missed this post (did not referesh). Do you >>> happen to know if the seat backs on the TJ seats go up any higher than >>> the fixed position on the YJ seats? >>> cheers >>> On Jan 24, 11:58 pm, MikeChamb...@webtv.net (Mike chambers) wrote: >>>> They will work . You may have to make a new bracket but they will fit. >>>> My 87 Yj's seats where trashed . So i made some brackets out of flat >>>> steel and grade 8 bolts and mounted a set i had out of a CJ5 i picked up >>>> out of a guy's yard. >>>> They are getting shot so I've been have ass looking for some new one's >>>> Not bad on short trips but any thing over an hour and back and butt >>>> feel it. >>>> Later Mike- Hide quoted text -- Show quoted text - > |
| All times are GMT -4. The time now is 07:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands