YJ Flat Fenders
Hey folks I was wondering if anyone has done the "Flat Fender" mod to
their YJ? http://www.4x4wire.com/jeep/tech/body/flatfender_yj/ http://www.jeepaholics.com/rides/view.asp?id=1523 A local body shop said they would paint my ride in the $900 to $1100 range if I stripped it of all hardware so I spent 2 days replacing all the hinges and hood hardware to stainless so the bolts where all freed. I was looking at the front fenders and the beating that they take from rocks chips etc. and I thought it would be a shame to get it painted just to have them fender leading edge get chipped up again and thought the flat fender would reduce the impact area. Also I was looking at going with different flares so I can get rid of the factory plastic step which I hate the looks of.....any suggestions on what flares I should look at getting? TIA |
Re: YJ Flat Fenders
There's several ways to do this with a jigsaw, but there are better ways.
Here's a link to Poison Spyder's extremely cool Tube Fenders. http://www.spydercustoms.com/index2.php I've seen several custom YJs done in similar fashion and they look tough as nails. I just spoke to Poison Spyder today, their entire stock of the type pictured are all sold. However they should have some by mid June, with the 3" wider version shipping in mid-July. Here's another brand, Rev1, Avalanche told me about, I'm not too nuts about the design, but it gives you another option. http://www.rev1crawlers.com/quark.htm I plan on doing this next winter. "Jeepster" <yj_driver@NOSPAM___.com> wrote in message news:c6u7b0trdoaanplqtc03635f20r439fo1c@4ax.com... > Hey folks I was wondering if anyone has done the "Flat Fender" mod to > their YJ? > http://www.4x4wire.com/jeep/tech/body/flatfender_yj/ > http://www.jeepaholics.com/rides/view.asp?id=1523 > > A local body shop said they would paint my ride in the $900 to $1100 > range if I stripped it of all hardware so I spent 2 days replacing all > the hinges and hood hardware to stainless so the bolts where all > freed. I was looking at the front fenders and the beating that they > take from rocks chips etc. and I thought it would be a shame to get it > painted just to have them fender leading edge get chipped up again and > thought the flat fender would reduce the impact area. Also I was > looking at going with different flares so I can get rid of the factory > plastic step which I hate the looks of.....any suggestions on what > flares I should look at getting? > > TIA |
Re: YJ Flat Fenders
There's several ways to do this with a jigsaw, but there are better ways.
Here's a link to Poison Spyder's extremely cool Tube Fenders. http://www.spydercustoms.com/index2.php I've seen several custom YJs done in similar fashion and they look tough as nails. I just spoke to Poison Spyder today, their entire stock of the type pictured are all sold. However they should have some by mid June, with the 3" wider version shipping in mid-July. Here's another brand, Rev1, Avalanche told me about, I'm not too nuts about the design, but it gives you another option. http://www.rev1crawlers.com/quark.htm I plan on doing this next winter. "Jeepster" <yj_driver@NOSPAM___.com> wrote in message news:c6u7b0trdoaanplqtc03635f20r439fo1c@4ax.com... > Hey folks I was wondering if anyone has done the "Flat Fender" mod to > their YJ? > http://www.4x4wire.com/jeep/tech/body/flatfender_yj/ > http://www.jeepaholics.com/rides/view.asp?id=1523 > > A local body shop said they would paint my ride in the $900 to $1100 > range if I stripped it of all hardware so I spent 2 days replacing all > the hinges and hood hardware to stainless so the bolts where all > freed. I was looking at the front fenders and the beating that they > take from rocks chips etc. and I thought it would be a shame to get it > painted just to have them fender leading edge get chipped up again and > thought the flat fender would reduce the impact area. Also I was > looking at going with different flares so I can get rid of the factory > plastic step which I hate the looks of.....any suggestions on what > flares I should look at getting? > > TIA |
Re: YJ Flat Fenders
There's several ways to do this with a jigsaw, but there are better ways.
Here's a link to Poison Spyder's extremely cool Tube Fenders. http://www.spydercustoms.com/index2.php I've seen several custom YJs done in similar fashion and they look tough as nails. I just spoke to Poison Spyder today, their entire stock of the type pictured are all sold. However they should have some by mid June, with the 3" wider version shipping in mid-July. Here's another brand, Rev1, Avalanche told me about, I'm not too nuts about the design, but it gives you another option. http://www.rev1crawlers.com/quark.htm I plan on doing this next winter. "Jeepster" <yj_driver@NOSPAM___.com> wrote in message news:c6u7b0trdoaanplqtc03635f20r439fo1c@4ax.com... > Hey folks I was wondering if anyone has done the "Flat Fender" mod to > their YJ? > http://www.4x4wire.com/jeep/tech/body/flatfender_yj/ > http://www.jeepaholics.com/rides/view.asp?id=1523 > > A local body shop said they would paint my ride in the $900 to $1100 > range if I stripped it of all hardware so I spent 2 days replacing all > the hinges and hood hardware to stainless so the bolts where all > freed. I was looking at the front fenders and the beating that they > take from rocks chips etc. and I thought it would be a shame to get it > painted just to have them fender leading edge get chipped up again and > thought the flat fender would reduce the impact area. Also I was > looking at going with different flares so I can get rid of the factory > plastic step which I hate the looks of.....any suggestions on what > flares I should look at getting? > > TIA |
Re: YJ Flat Fenders
There's several ways to do this with a jigsaw, but there are better ways.
Here's a link to Poison Spyder's extremely cool Tube Fenders. http://www.spydercustoms.com/index2.php I've seen several custom YJs done in similar fashion and they look tough as nails. I just spoke to Poison Spyder today, their entire stock of the type pictured are all sold. However they should have some by mid June, with the 3" wider version shipping in mid-July. Here's another brand, Rev1, Avalanche told me about, I'm not too nuts about the design, but it gives you another option. http://www.rev1crawlers.com/quark.htm I plan on doing this next winter. "Jeepster" <yj_driver@NOSPAM___.com> wrote in message news:c6u7b0trdoaanplqtc03635f20r439fo1c@4ax.com... > Hey folks I was wondering if anyone has done the "Flat Fender" mod to > their YJ? > http://www.4x4wire.com/jeep/tech/body/flatfender_yj/ > http://www.jeepaholics.com/rides/view.asp?id=1523 > > A local body shop said they would paint my ride in the $900 to $1100 > range if I stripped it of all hardware so I spent 2 days replacing all > the hinges and hood hardware to stainless so the bolts where all > freed. I was looking at the front fenders and the beating that they > take from rocks chips etc. and I thought it would be a shame to get it > painted just to have them fender leading edge get chipped up again and > thought the flat fender would reduce the impact area. Also I was > looking at going with different flares so I can get rid of the factory > plastic step which I hate the looks of.....any suggestions on what > flares I should look at getting? > > TIA |
Re: YJ Flat Fenders
Looks like he blew some moola on the TJ flares, then cut em ... ??? Adds
character for sure. ~ ~ ~ ~ ~ ~ Redge Egder http://members.allstream.net/~kaessie/jeepin/ Inquiro Et Invenio... "Jeepster" <yj_driver@NOSPAM___.com> wrote in message news:c6u7b0trdoaanplqtc03635f20r439fo1c@4ax.com... > Hey folks I was wondering if anyone has done the "Flat Fender" mod to > their YJ? > http://www.4x4wire.com/jeep/tech/body/flatfender_yj/ > http://www.jeepaholics.com/rides/view.asp?id=1523 > > A local body shop said they would paint my ride in the $900 to $1100 > range if I stripped it of all hardware so I spent 2 days replacing all > the hinges and hood hardware to stainless so the bolts where all > freed. I was looking at the front fenders and the beating that they > take from rocks chips etc. and I thought it would be a shame to get it > painted just to have them fender leading edge get chipped up again and > thought the flat fender would reduce the impact area. Also I was > looking at going with different flares so I can get rid of the factory > plastic step which I hate the looks of.....any suggestions on what > flares I should look at getting? > > TIA |
Re: YJ Flat Fenders
Looks like he blew some moola on the TJ flares, then cut em ... ??? Adds
character for sure. ~ ~ ~ ~ ~ ~ Redge Egder http://members.allstream.net/~kaessie/jeepin/ Inquiro Et Invenio... "Jeepster" <yj_driver@NOSPAM___.com> wrote in message news:c6u7b0trdoaanplqtc03635f20r439fo1c@4ax.com... > Hey folks I was wondering if anyone has done the "Flat Fender" mod to > their YJ? > http://www.4x4wire.com/jeep/tech/body/flatfender_yj/ > http://www.jeepaholics.com/rides/view.asp?id=1523 > > A local body shop said they would paint my ride in the $900 to $1100 > range if I stripped it of all hardware so I spent 2 days replacing all > the hinges and hood hardware to stainless so the bolts where all > freed. I was looking at the front fenders and the beating that they > take from rocks chips etc. and I thought it would be a shame to get it > painted just to have them fender leading edge get chipped up again and > thought the flat fender would reduce the impact area. Also I was > looking at going with different flares so I can get rid of the factory > plastic step which I hate the looks of.....any suggestions on what > flares I should look at getting? > > TIA |
Re: YJ Flat Fenders
Looks like he blew some moola on the TJ flares, then cut em ... ??? Adds
character for sure. ~ ~ ~ ~ ~ ~ Redge Egder http://members.allstream.net/~kaessie/jeepin/ Inquiro Et Invenio... "Jeepster" <yj_driver@NOSPAM___.com> wrote in message news:c6u7b0trdoaanplqtc03635f20r439fo1c@4ax.com... > Hey folks I was wondering if anyone has done the "Flat Fender" mod to > their YJ? > http://www.4x4wire.com/jeep/tech/body/flatfender_yj/ > http://www.jeepaholics.com/rides/view.asp?id=1523 > > A local body shop said they would paint my ride in the $900 to $1100 > range if I stripped it of all hardware so I spent 2 days replacing all > the hinges and hood hardware to stainless so the bolts where all > freed. I was looking at the front fenders and the beating that they > take from rocks chips etc. and I thought it would be a shame to get it > painted just to have them fender leading edge get chipped up again and > thought the flat fender would reduce the impact area. Also I was > looking at going with different flares so I can get rid of the factory > plastic step which I hate the looks of.....any suggestions on what > flares I should look at getting? > > TIA |
Re: YJ Flat Fenders
Looks like he blew some moola on the TJ flares, then cut em ... ??? Adds
character for sure. ~ ~ ~ ~ ~ ~ Redge Egder http://members.allstream.net/~kaessie/jeepin/ Inquiro Et Invenio... "Jeepster" <yj_driver@NOSPAM___.com> wrote in message news:c6u7b0trdoaanplqtc03635f20r439fo1c@4ax.com... > Hey folks I was wondering if anyone has done the "Flat Fender" mod to > their YJ? > http://www.4x4wire.com/jeep/tech/body/flatfender_yj/ > http://www.jeepaholics.com/rides/view.asp?id=1523 > > A local body shop said they would paint my ride in the $900 to $1100 > range if I stripped it of all hardware so I spent 2 days replacing all > the hinges and hood hardware to stainless so the bolts where all > freed. I was looking at the front fenders and the beating that they > take from rocks chips etc. and I thought it would be a shame to get it > painted just to have them fender leading edge get chipped up again and > thought the flat fender would reduce the impact area. Also I was > looking at going with different flares so I can get rid of the factory > plastic step which I hate the looks of.....any suggestions on what > flares I should look at getting? > > TIA |
All times are GMT -4. The time now is 09:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands