|
Re: xj Dana 44
yup..it won't quite seat all the way. i was doing bearings a while ago, had
the shafts on the wrong sides and bent the crap out of the retaining plate trying to get it to seat (long shaft on the short side). :( "Jerry Bransford" <jerrypb@cox.net> wrote in message news:qB7Qc.2915$yh.744@fed1read05... > Is the long side really just too long to use in the short side? > > Jerry > -- > Jerry Bransford > PP-ASEL N6TAY > See the Geezer Jeep at > http://members.cox.net/jerrypb/ > "Chuck Bremer" <cbremer@*hotmail.com> wrote in message > news:411104fd$0$8078$a1866201@newsreader.dsl.net.. . > > the D44 has 30 spline, 1-piece axle shafts. in a pinch (for a spare, > etc.) > > you can use the short-side shaft in place of the long side- there's less > > than 1/2" difference between the length of the shafts, and it'll work well > > enough to get you home. > > > > > > "Doug Fritz" <jp4by4cya@comcast.net> wrote in message > > news:ysKdnQqHOdTkW43cRVn-hw@comcast.com... > > > > > > Can anyone tell me about the axle shafts in stock 87-90 Cherokee > Rear > > > Dana 44s? Are they 28 spline? Are they one piece axle shafts? I have > a > > > line on one to replace my D35 (anyone want a D35 with Detroit and 4.88 > > > gears?) and I want to be sure I am getting a better axle. > > > > > > Thanks, > > > > > > Doug > > > > > > > > > > > > |
Re: xj Dana 44
yup..it won't quite seat all the way. i was doing bearings a while ago, had
the shafts on the wrong sides and bent the crap out of the retaining plate trying to get it to seat (long shaft on the short side). :( "Jerry Bransford" <jerrypb@cox.net> wrote in message news:qB7Qc.2915$yh.744@fed1read05... > Is the long side really just too long to use in the short side? > > Jerry > -- > Jerry Bransford > PP-ASEL N6TAY > See the Geezer Jeep at > http://members.cox.net/jerrypb/ > "Chuck Bremer" <cbremer@*hotmail.com> wrote in message > news:411104fd$0$8078$a1866201@newsreader.dsl.net.. . > > the D44 has 30 spline, 1-piece axle shafts. in a pinch (for a spare, > etc.) > > you can use the short-side shaft in place of the long side- there's less > > than 1/2" difference between the length of the shafts, and it'll work well > > enough to get you home. > > > > > > "Doug Fritz" <jp4by4cya@comcast.net> wrote in message > > news:ysKdnQqHOdTkW43cRVn-hw@comcast.com... > > > > > > Can anyone tell me about the axle shafts in stock 87-90 Cherokee > Rear > > > Dana 44s? Are they 28 spline? Are they one piece axle shafts? I have > a > > > line on one to replace my D35 (anyone want a D35 with Detroit and 4.88 > > > gears?) and I want to be sure I am getting a better axle. > > > > > > Thanks, > > > > > > Doug > > > > > > > > > > > > |
Re: xj Dana 44
yup..it won't quite seat all the way. i was doing bearings a while ago, had
the shafts on the wrong sides and bent the crap out of the retaining plate trying to get it to seat (long shaft on the short side). :( "Jerry Bransford" <jerrypb@cox.net> wrote in message news:qB7Qc.2915$yh.744@fed1read05... > Is the long side really just too long to use in the short side? > > Jerry > -- > Jerry Bransford > PP-ASEL N6TAY > See the Geezer Jeep at > http://members.cox.net/jerrypb/ > "Chuck Bremer" <cbremer@*hotmail.com> wrote in message > news:411104fd$0$8078$a1866201@newsreader.dsl.net.. . > > the D44 has 30 spline, 1-piece axle shafts. in a pinch (for a spare, > etc.) > > you can use the short-side shaft in place of the long side- there's less > > than 1/2" difference between the length of the shafts, and it'll work well > > enough to get you home. > > > > > > "Doug Fritz" <jp4by4cya@comcast.net> wrote in message > > news:ysKdnQqHOdTkW43cRVn-hw@comcast.com... > > > > > > Can anyone tell me about the axle shafts in stock 87-90 Cherokee > Rear > > > Dana 44s? Are they 28 spline? Are they one piece axle shafts? I have > a > > > line on one to replace my D35 (anyone want a D35 with Detroit and 4.88 > > > gears?) and I want to be sure I am getting a better axle. > > > > > > Thanks, > > > > > > Doug > > > > > > > > > > > > |
Re: xj Dana 44
Thank you for this information. I am picking up the axle tomorrow. I look
forward to removing the D35 once and for all. Doug. "Chuck Bremer" <cbremer@*hotmail.com> wrote in message news:411104fd$0$8078$a1866201@newsreader.dsl.net.. . > the D44 has 30 spline, 1-piece axle shafts. in a pinch (for a spare, etc.) > you can use the short-side shaft in place of the long side- there's less > than 1/2" difference between the length of the shafts, and it'll work well > enough to get you home. |
Re: xj Dana 44
Thank you for this information. I am picking up the axle tomorrow. I look
forward to removing the D35 once and for all. Doug. "Chuck Bremer" <cbremer@*hotmail.com> wrote in message news:411104fd$0$8078$a1866201@newsreader.dsl.net.. . > the D44 has 30 spline, 1-piece axle shafts. in a pinch (for a spare, etc.) > you can use the short-side shaft in place of the long side- there's less > than 1/2" difference between the length of the shafts, and it'll work well > enough to get you home. |
Re: xj Dana 44
Thank you for this information. I am picking up the axle tomorrow. I look
forward to removing the D35 once and for all. Doug. "Chuck Bremer" <cbremer@*hotmail.com> wrote in message news:411104fd$0$8078$a1866201@newsreader.dsl.net.. . > the D44 has 30 spline, 1-piece axle shafts. in a pinch (for a spare, etc.) > you can use the short-side shaft in place of the long side- there's less > than 1/2" difference between the length of the shafts, and it'll work well > enough to get you home. |
Re: xj Dana 44
Thank you for this information. I am picking up the axle tomorrow. I look
forward to removing the D35 once and for all. Doug. "Chuck Bremer" <cbremer@*hotmail.com> wrote in message news:411104fd$0$8078$a1866201@newsreader.dsl.net.. . > the D44 has 30 spline, 1-piece axle shafts. in a pinch (for a spare, etc.) > you can use the short-side shaft in place of the long side- there's less > than 1/2" difference between the length of the shafts, and it'll work well > enough to get you home. |
Re: xj Dana 44
Thanks Chuck, I will continue carrying just the short-side then. :)
Jerry -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ "Chuck Bremer" <cbremer@*hotmail.com> wrote in message news:41110b2e$0$65567$a1866201@newsreader.dsl.net. .. > yup..it won't quite seat all the way. i was doing bearings a while ago, had > the shafts on the wrong sides and bent the crap out of the retaining plate > trying to get it to seat (long shaft on the short side). > > :( > > > "Jerry Bransford" <jerrypb@cox.net> wrote in message > news:qB7Qc.2915$yh.744@fed1read05... > > Is the long side really just too long to use in the short side? > > > > Jerry > > -- > > Jerry Bransford > > PP-ASEL N6TAY > > See the Geezer Jeep at > > http://members.cox.net/jerrypb/ > > "Chuck Bremer" <cbremer@*hotmail.com> wrote in message > > news:411104fd$0$8078$a1866201@newsreader.dsl.net.. . > > > the D44 has 30 spline, 1-piece axle shafts. in a pinch (for a spare, > > etc.) > > > you can use the short-side shaft in place of the long side- there's less > > > than 1/2" difference between the length of the shafts, and it'll work > well > > > enough to get you home. > > > > > > > > > "Doug Fritz" <jp4by4cya@comcast.net> wrote in message > > > news:ysKdnQqHOdTkW43cRVn-hw@comcast.com... > > > > > > > > Can anyone tell me about the axle shafts in stock 87-90 Cherokee > > Rear > > > > Dana 44s? Are they 28 spline? Are they one piece axle shafts? I > have > > a > > > > line on one to replace my D35 (anyone want a D35 with Detroit and 4.88 > > > > gears?) and I want to be sure I am getting a better axle. > > > > > > > > Thanks, > > > > > > > > Doug > > > > > > > > > > > > > > > > > > > > |
Re: xj Dana 44
Thanks Chuck, I will continue carrying just the short-side then. :)
Jerry -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ "Chuck Bremer" <cbremer@*hotmail.com> wrote in message news:41110b2e$0$65567$a1866201@newsreader.dsl.net. .. > yup..it won't quite seat all the way. i was doing bearings a while ago, had > the shafts on the wrong sides and bent the crap out of the retaining plate > trying to get it to seat (long shaft on the short side). > > :( > > > "Jerry Bransford" <jerrypb@cox.net> wrote in message > news:qB7Qc.2915$yh.744@fed1read05... > > Is the long side really just too long to use in the short side? > > > > Jerry > > -- > > Jerry Bransford > > PP-ASEL N6TAY > > See the Geezer Jeep at > > http://members.cox.net/jerrypb/ > > "Chuck Bremer" <cbremer@*hotmail.com> wrote in message > > news:411104fd$0$8078$a1866201@newsreader.dsl.net.. . > > > the D44 has 30 spline, 1-piece axle shafts. in a pinch (for a spare, > > etc.) > > > you can use the short-side shaft in place of the long side- there's less > > > than 1/2" difference between the length of the shafts, and it'll work > well > > > enough to get you home. > > > > > > > > > "Doug Fritz" <jp4by4cya@comcast.net> wrote in message > > > news:ysKdnQqHOdTkW43cRVn-hw@comcast.com... > > > > > > > > Can anyone tell me about the axle shafts in stock 87-90 Cherokee > > Rear > > > > Dana 44s? Are they 28 spline? Are they one piece axle shafts? I > have > > a > > > > line on one to replace my D35 (anyone want a D35 with Detroit and 4.88 > > > > gears?) and I want to be sure I am getting a better axle. > > > > > > > > Thanks, > > > > > > > > Doug > > > > > > > > > > > > > > > > > > > > |
Re: xj Dana 44
Thanks Chuck, I will continue carrying just the short-side then. :)
Jerry -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ "Chuck Bremer" <cbremer@*hotmail.com> wrote in message news:41110b2e$0$65567$a1866201@newsreader.dsl.net. .. > yup..it won't quite seat all the way. i was doing bearings a while ago, had > the shafts on the wrong sides and bent the crap out of the retaining plate > trying to get it to seat (long shaft on the short side). > > :( > > > "Jerry Bransford" <jerrypb@cox.net> wrote in message > news:qB7Qc.2915$yh.744@fed1read05... > > Is the long side really just too long to use in the short side? > > > > Jerry > > -- > > Jerry Bransford > > PP-ASEL N6TAY > > See the Geezer Jeep at > > http://members.cox.net/jerrypb/ > > "Chuck Bremer" <cbremer@*hotmail.com> wrote in message > > news:411104fd$0$8078$a1866201@newsreader.dsl.net.. . > > > the D44 has 30 spline, 1-piece axle shafts. in a pinch (for a spare, > > etc.) > > > you can use the short-side shaft in place of the long side- there's less > > > than 1/2" difference between the length of the shafts, and it'll work > well > > > enough to get you home. > > > > > > > > > "Doug Fritz" <jp4by4cya@comcast.net> wrote in message > > > news:ysKdnQqHOdTkW43cRVn-hw@comcast.com... > > > > > > > > Can anyone tell me about the axle shafts in stock 87-90 Cherokee > > Rear > > > > Dana 44s? Are they 28 spline? Are they one piece axle shafts? I > have > > a > > > > line on one to replace my D35 (anyone want a D35 with Detroit and 4.88 > > > > gears?) and I want to be sure I am getting a better axle. > > > > > > > > Thanks, > > > > > > > > Doug > > > > > > > > > > > > > > > > > > > > |
| All times are GMT -4. The time now is 12:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands