Wrangler cruise control
 

I need some recommendations for adding cruise control to my 2000 Wrangler
w/auto/air/6 cyl. Would I be better off to add the factory cruise or are
their some good alternatives form other sources such as JC Whitney? Any
personal experiences with the installation of factory or alternatives?

2000 Wrangler Sport
2000 Nissan Xterra SE

Re: Wrangler cruise control
 

I found that getting the steering wheel off was a real pain, but the rest
was done in 1.5 hours and was very simple - no drilling required and it
works great.

--
Dave Milne, Scotland
'99 TJ 4.0 Sahara

"Bob Zami" <zamo122@comcast.net> wrote in message
news:V-idnYuOsu8hOsWiXTWJiQ@comcast.com...
: I have first hand experience on installing the factory cruise. It took
about
: 3 1/2 hours and I have been in the installation business for 12 years. It
: wasn't complicated to do after much examination of the instructions. It
went
: into my 2001 Sahara and included an extra wire which I found out was only
: used on the 97. The computer hook up was also tedious. The open pins that
: need to be connected are not drilled out, you need to drill them out. That
: is the most difficult part. I forget the total cost? I think just under
: $200. Aftermarket cruise can be installed professionally for around that
: cost. I really like the way the factory one works.
:
: Bob Z
:
:
: "Ralph Southerland" <thesoutherlands@earthlink.net> wrote in message
: news:KVZ5b.44$_26.35@newsread2.news.atl.earthlink. net...
: > I need some recommendations for adding cruise control to my 2000
Wrangler
: > w/auto/air/6 cyl. Would I be better off to add the factory cruise or are
: > their some good alternatives form other sources such as JC Whitney? Any
: > personal experiences with the installation of factory or alternatives?
: >
: > 2000 Wrangler Sport
: > 2000 Nissan Xterra SE
: >
: >
:
:

Re: Wrangler cruise control
 

I found that getting the steering wheel off was a real pain, but the rest
was done in 1.5 hours and was very simple - no drilling required and it
works great.

--
Dave Milne, Scotland
'99 TJ 4.0 Sahara

"Bob Zami" <zamo122@comcast.net> wrote in message
news:V-idnYuOsu8hOsWiXTWJiQ@comcast.com...
: I have first hand experience on installing the factory cruise. It took
about
: 3 1/2 hours and I have been in the installation business for 12 years. It
: wasn't complicated to do after much examination of the instructions. It
went
: into my 2001 Sahara and included an extra wire which I found out was only
: used on the 97. The computer hook up was also tedious. The open pins that
: need to be connected are not drilled out, you need to drill them out. That
: is the most difficult part. I forget the total cost? I think just under
: $200. Aftermarket cruise can be installed professionally for around that
: cost. I really like the way the factory one works.
:
: Bob Z
:
:
: "Ralph Southerland" <thesoutherlands@earthlink.net> wrote in message
: news:KVZ5b.44$_26.35@newsread2.news.atl.earthlink. net...
: > I need some recommendations for adding cruise control to my 2000
Wrangler
: > w/auto/air/6 cyl. Would I be better off to add the factory cruise or are
: > their some good alternatives form other sources such as JC Whitney? Any
: > personal experiences with the installation of factory or alternatives?
: >
: > 2000 Wrangler Sport
: > 2000 Nissan Xterra SE
: >
: >
:
:

Re: Wrangler cruise control
 

On my 99 SE it was a plug in affair as it was all prewired. No drilling and
no problems. I would recommend the factory cruise.

--
Bob Parkison
bobparki@citlink.net

"Ralph Southerland" <thesoutherlands@earthlink.net> wrote in message
news:KVZ5b.44$_26.35@newsread2.news.atl.earthlink. net...
> I need some recommendations for adding cruise control to my 2000 Wrangler
> w/auto/air/6 cyl. Would I be better off to add the factory cruise or are
> their some good alternatives form other sources such as JC Whitney? Any
> personal experiences with the installation of factory or alternatives?
>
> 2000 Wrangler Sport
> 2000 Nissan Xterra SE
>
>

Re: Wrangler cruise control
 

On my 99 SE it was a plug in affair as it was all prewired. No drilling and
no problems. I would recommend the factory cruise.

--
Bob Parkison
bobparki@citlink.net

"Ralph Southerland" <thesoutherlands@earthlink.net> wrote in message
news:KVZ5b.44$_26.35@newsread2.news.atl.earthlink. net...
> I need some recommendations for adding cruise control to my 2000 Wrangler
> w/auto/air/6 cyl. Would I be better off to add the factory cruise or are
> their some good alternatives form other sources such as JC Whitney? Any
> personal experiences with the installation of factory or alternatives?
>
> 2000 Wrangler Sport
> 2000 Nissan Xterra SE
>
>