wow you guys will love this one..!!
 

the squilling noise has stopped... it may come back who knows...spooky..
could have been the belt.. but listen to this.. I stopped by my local mech
told him what was going on.. and just incase it starts again i would like
an estimate. well of course he gave me one of what i thought. to replace
the throwout bearing and the whole shabang would be 650.00 then i went to
a transmission specialist my husband knows he told me and estimate for the
same thing for 325.00... and he told me its very unusual for a throwout
bearing to subside on the squilling once its already there... any feedback
on this ghost... i wonder if it was the belt.. but why... once it was
replace did it still squill and not now... could it be that it was
adjusting itself.. ?? i know that sounds stupied but being a girl .. im
grabing at long shots... thanks..

Re: wow you guys will love this one..!!
 

If you think it still might be the front, check the idler pulley on the
serpentine belt system. I had an XJ that had a bad idler pulley that sounded
like a belt.

"agent99" <agent99ri@cox.net> wrote in message
news:902df6a11a5a855479d9a9cc0092c925@localhost.ta lkaboutautos.com...
> the squilling noise has stopped... it may come back who knows...spooky..
> could have been the belt.. but listen to this.. I stopped by my local mech
> told him what was going on.. and just incase it starts again i would like
> an estimate. well of course he gave me one of what i thought. to replace
> the throwout bearing and the whole shabang would be 650.00 then i went to
> a transmission specialist my husband knows he told me and estimate for the
> same thing for 325.00... and he told me its very unusual for a throwout
> bearing to subside on the squilling once its already there... any feedback
> on this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl .. im
> grabing at long shots... thanks..
>

Re: wow you guys will love this one..!!
 

If you think it still might be the front, check the idler pulley on the
serpentine belt system. I had an XJ that had a bad idler pulley that sounded
like a belt.

"agent99" <agent99ri@cox.net> wrote in message
news:902df6a11a5a855479d9a9cc0092c925@localhost.ta lkaboutautos.com...
> the squilling noise has stopped... it may come back who knows...spooky..
> could have been the belt.. but listen to this.. I stopped by my local mech
> told him what was going on.. and just incase it starts again i would like
> an estimate. well of course he gave me one of what i thought. to replace
> the throwout bearing and the whole shabang would be 650.00 then i went to
> a transmission specialist my husband knows he told me and estimate for the
> same thing for 325.00... and he told me its very unusual for a throwout
> bearing to subside on the squilling once its already there... any feedback
> on this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl .. im
> grabing at long shots... thanks..
>

Re: wow you guys will love this one..!!
 

If you think it still might be the front, check the idler pulley on the
serpentine belt system. I had an XJ that had a bad idler pulley that sounded
like a belt.

"agent99" <agent99ri@cox.net> wrote in message
news:902df6a11a5a855479d9a9cc0092c925@localhost.ta lkaboutautos.com...
> the squilling noise has stopped... it may come back who knows...spooky..
> could have been the belt.. but listen to this.. I stopped by my local mech
> told him what was going on.. and just incase it starts again i would like
> an estimate. well of course he gave me one of what i thought. to replace
> the throwout bearing and the whole shabang would be 650.00 then i went to
> a transmission specialist my husband knows he told me and estimate for the
> same thing for 325.00... and he told me its very unusual for a throwout
> bearing to subside on the squilling once its already there... any feedback
> on this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl .. im
> grabing at long shots... thanks..
>

Re: wow you guys will love this one..!!
 

agent99 wrote:
> the squilling noise has stopped... it may come back who
> knows...spooky.. could have been the belt.. but listen to this.. I
> stopped by my local mech told him what was going on.. and just incase
> it starts again i would like an estimate. well of course he gave me
> one of what i thought. to replace the throwout bearing and the whole
> shabang would be 650.00 then i went to a transmission specialist my
> husband knows he told me and estimate for the same thing for
> 325.00... and he told me its very unusual for a throwout bearing to
> subside on the squilling once its already there... any feedback on
> this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl ..
> im grabing at long shots... thanks..

If the belt was very slick it could have left traces on the pulleys.
I usually take a brass brush and brake-kleen to the pulley surfaces
before putting on a new belt.

--
DougW

Re: wow you guys will love this one..!!
 

agent99 wrote:
> the squilling noise has stopped... it may come back who
> knows...spooky.. could have been the belt.. but listen to this.. I
> stopped by my local mech told him what was going on.. and just incase
> it starts again i would like an estimate. well of course he gave me
> one of what i thought. to replace the throwout bearing and the whole
> shabang would be 650.00 then i went to a transmission specialist my
> husband knows he told me and estimate for the same thing for
> 325.00... and he told me its very unusual for a throwout bearing to
> subside on the squilling once its already there... any feedback on
> this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl ..
> im grabing at long shots... thanks..

If the belt was very slick it could have left traces on the pulleys.
I usually take a brass brush and brake-kleen to the pulley surfaces
before putting on a new belt.

--
DougW

Re: wow you guys will love this one..!!
 

agent99 wrote:
> the squilling noise has stopped... it may come back who
> knows...spooky.. could have been the belt.. but listen to this.. I
> stopped by my local mech told him what was going on.. and just incase
> it starts again i would like an estimate. well of course he gave me
> one of what i thought. to replace the throwout bearing and the whole
> shabang would be 650.00 then i went to a transmission specialist my
> husband knows he told me and estimate for the same thing for
> 325.00... and he told me its very unusual for a throwout bearing to
> subside on the squilling once its already there... any feedback on
> this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl ..
> im grabing at long shots... thanks..

If the belt was very slick it could have left traces on the pulleys.
I usually take a brass brush and brake-kleen to the pulley surfaces
before putting on a new belt.

--
DougW

Re: wow you guys will love this one..!!
 

"Squeal, squealed, squealing, squealer".

Saludos,

Earle

"agent99" <agent99ri@cox.net> wrote in message
news:902df6a11a5a855479d9a9cc0092c925@localhost.ta lkaboutautos.com...
> the squilling noise has stopped... it may come back who knows...spooky..
> could have been the belt.. but listen to this.. I stopped by my local mech
> told him what was going on.. and just incase it starts again i would like
> an estimate. well of course he gave me one of what i thought. to replace
> the throwout bearing and the whole shabang would be 650.00 then i went to
> a transmission specialist my husband knows he told me and estimate for the
> same thing for 325.00... and he told me its very unusual for a throwout
> bearing to subside on the squilling once its already there... any feedback
> on this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl .. im
> grabing at long shots... thanks..
>

Re: wow you guys will love this one..!!
 

"Squeal, squealed, squealing, squealer".

Saludos,

Earle

"agent99" <agent99ri@cox.net> wrote in message
news:902df6a11a5a855479d9a9cc0092c925@localhost.ta lkaboutautos.com...
> the squilling noise has stopped... it may come back who knows...spooky..
> could have been the belt.. but listen to this.. I stopped by my local mech
> told him what was going on.. and just incase it starts again i would like
> an estimate. well of course he gave me one of what i thought. to replace
> the throwout bearing and the whole shabang would be 650.00 then i went to
> a transmission specialist my husband knows he told me and estimate for the
> same thing for 325.00... and he told me its very unusual for a throwout
> bearing to subside on the squilling once its already there... any feedback
> on this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl .. im
> grabing at long shots... thanks..
>

Re: wow you guys will love this one..!!
 

"Squeal, squealed, squealing, squealer".

Saludos,

Earle

"agent99" <agent99ri@cox.net> wrote in message
news:902df6a11a5a855479d9a9cc0092c925@localhost.ta lkaboutautos.com...
> the squilling noise has stopped... it may come back who knows...spooky..
> could have been the belt.. but listen to this.. I stopped by my local mech
> told him what was going on.. and just incase it starts again i would like
> an estimate. well of course he gave me one of what i thought. to replace
> the throwout bearing and the whole shabang would be 650.00 then i went to
> a transmission specialist my husband knows he told me and estimate for the
> same thing for 325.00... and he told me its very unusual for a throwout
> bearing to subside on the squilling once its already there... any feedback
> on this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl .. im
> grabing at long shots... thanks..
>

Re: wow you guys will love this one..!!
 

I was thinking the idler pulley, but your alternator could have been
slipping before so the battery was low and it had a hard time charging
it back up.

When the alternator is under full load trying to charge up a low
battery, it can slip under the belt if the belt is bad or not quite
tight enough. The alternator takes a few horsepower to spin up under
load.

I would take your alternator pulley when the engine was cold and off and
see if I could make the pulley turn by hand under the belt. If I can
make the pulley turn, then the belt isn't tight enough still and it will
slip and squeal under load.

It is not uncommon to have a new belt not tight enough...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

agent99 wrote:
>
> the squilling noise has stopped... it may come back who knows...spooky..
> could have been the belt.. but listen to this.. I stopped by my local mech
> told him what was going on.. and just incase it starts again i would like
> an estimate. well of course he gave me one of what i thought. to replace
> the throwout bearing and the whole shabang would be 650.00 then i went to
> a transmission specialist my husband knows he told me and estimate for the
> same thing for 325.00... and he told me its very unusual for a throwout
> bearing to subside on the squilling once its already there... any feedback
> on this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl .. im
> grabing at long shots... thanks..

Re: wow you guys will love this one..!!
 

I was thinking the idler pulley, but your alternator could have been
slipping before so the battery was low and it had a hard time charging
it back up.

When the alternator is under full load trying to charge up a low
battery, it can slip under the belt if the belt is bad or not quite
tight enough. The alternator takes a few horsepower to spin up under
load.

I would take your alternator pulley when the engine was cold and off and
see if I could make the pulley turn by hand under the belt. If I can
make the pulley turn, then the belt isn't tight enough still and it will
slip and squeal under load.

It is not uncommon to have a new belt not tight enough...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

agent99 wrote:
>
> the squilling noise has stopped... it may come back who knows...spooky..
> could have been the belt.. but listen to this.. I stopped by my local mech
> told him what was going on.. and just incase it starts again i would like
> an estimate. well of course he gave me one of what i thought. to replace
> the throwout bearing and the whole shabang would be 650.00 then i went to
> a transmission specialist my husband knows he told me and estimate for the
> same thing for 325.00... and he told me its very unusual for a throwout
> bearing to subside on the squilling once its already there... any feedback
> on this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl .. im
> grabing at long shots... thanks..

Re: wow you guys will love this one..!!
 

I was thinking the idler pulley, but your alternator could have been
slipping before so the battery was low and it had a hard time charging
it back up.

When the alternator is under full load trying to charge up a low
battery, it can slip under the belt if the belt is bad or not quite
tight enough. The alternator takes a few horsepower to spin up under
load.

I would take your alternator pulley when the engine was cold and off and
see if I could make the pulley turn by hand under the belt. If I can
make the pulley turn, then the belt isn't tight enough still and it will
slip and squeal under load.

It is not uncommon to have a new belt not tight enough...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

agent99 wrote:
>
> the squilling noise has stopped... it may come back who knows...spooky..
> could have been the belt.. but listen to this.. I stopped by my local mech
> told him what was going on.. and just incase it starts again i would like
> an estimate. well of course he gave me one of what i thought. to replace
> the throwout bearing and the whole shabang would be 650.00 then i went to
> a transmission specialist my husband knows he told me and estimate for the
> same thing for 325.00... and he told me its very unusual for a throwout
> bearing to subside on the squilling once its already there... any feedback
> on this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl .. im
> grabing at long shots... thanks..

Re: wow you guys will love this one..!!
 

Earle Horton wrote:
> "Squeal, squealed, squealing, squealer".
>
> Saludos,
>
> Earle


I didn't want to be the one to say it...

Re: wow you guys will love this one..!!
 

Earle Horton wrote:
> "Squeal, squealed, squealing, squealer".
>
> Saludos,
>
> Earle


I didn't want to be the one to say it...

Re: wow you guys will love this one..!!
 

Earle Horton wrote:
> "Squeal, squealed, squealing, squealer".
>
> Saludos,
>
> Earle


I didn't want to be the one to say it...

Re: wow you guys will love this one..!!
 

"Earle Horton" <earle@vascongau.usa> wrote in message
news:459a8269$0$3483$a82e2bb9@reader.athenanews.co m...
> "Squeal, squealed, squealing, squealer".
>
> Saludos,
>
> Earle
>



Thank you.

Spdloader

Re: wow you guys will love this one..!!
 

"Earle Horton" <earle@vascongau.usa> wrote in message
news:459a8269$0$3483$a82e2bb9@reader.athenanews.co m...
> "Squeal, squealed, squealing, squealer".
>
> Saludos,
>
> Earle
>



Thank you.

Spdloader

Re: wow you guys will love this one..!!
 

"Earle Horton" <earle@vascongau.usa> wrote in message
news:459a8269$0$3483$a82e2bb9@reader.athenanews.co m...
> "Squeal, squealed, squealing, squealer".
>
> Saludos,
>
> Earle
>



Thank you.

Spdloader

Re: wow you guys will love this one..!!
 

Have you checked to see if there are any rocks or mud in between the brake
disk and the dust sheild?


"agent99" <agent99ri@cox.net> wrote in message
news:902df6a11a5a855479d9a9cc0092c925@localhost.ta lkaboutautos.com...
> the squilling noise has stopped... it may come back who knows...spooky..
> could have been the belt.. but listen to this.. I stopped by my local mech
> told him what was going on.. and just incase it starts again i would like
> an estimate. well of course he gave me one of what i thought. to replace
> the throwout bearing and the whole shabang would be 650.00 then i went to
> a transmission specialist my husband knows he told me and estimate for the
> same thing for 325.00... and he told me its very unusual for a throwout
> bearing to subside on the squilling once its already there... any feedback
> on this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl .. im
> grabing at long shots... thanks..
>

Re: wow you guys will love this one..!!
 

Have you checked to see if there are any rocks or mud in between the brake
disk and the dust sheild?


"agent99" <agent99ri@cox.net> wrote in message
news:902df6a11a5a855479d9a9cc0092c925@localhost.ta lkaboutautos.com...
> the squilling noise has stopped... it may come back who knows...spooky..
> could have been the belt.. but listen to this.. I stopped by my local mech
> told him what was going on.. and just incase it starts again i would like
> an estimate. well of course he gave me one of what i thought. to replace
> the throwout bearing and the whole shabang would be 650.00 then i went to
> a transmission specialist my husband knows he told me and estimate for the
> same thing for 325.00... and he told me its very unusual for a throwout
> bearing to subside on the squilling once its already there... any feedback
> on this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl .. im
> grabing at long shots... thanks..
>

Re: wow you guys will love this one..!!
 

Have you checked to see if there are any rocks or mud in between the brake
disk and the dust sheild?


"agent99" <agent99ri@cox.net> wrote in message
news:902df6a11a5a855479d9a9cc0092c925@localhost.ta lkaboutautos.com...
> the squilling noise has stopped... it may come back who knows...spooky..
> could have been the belt.. but listen to this.. I stopped by my local mech
> told him what was going on.. and just incase it starts again i would like
> an estimate. well of course he gave me one of what i thought. to replace
> the throwout bearing and the whole shabang would be 650.00 then i went to
> a transmission specialist my husband knows he told me and estimate for the
> same thing for 325.00... and he told me its very unusual for a throwout
> bearing to subside on the squilling once its already there... any feedback
> on this ghost... i wonder if it was the belt.. but why... once it was
> replace did it still squill and not now... could it be that it was
> adjusting itself.. ?? i know that sounds stupied but being a girl .. im
> grabing at long shots... thanks..
>