Re: Where to find 72 CJ5 Wiper Linkage
 

"Ben Reuter" <reutebh@earthlink.net> wrote in message news:<iKl6d.5285$r%4.1918@trndny05>...
> Could anyone point me in the direction of a company that sells a wiper
> linkage kit for a 72 CJ5- all the sites I have found only list them for 76
> and later, and neither Quadratec or 4WD could recommend anyone who might
> carry this. Thanks
>
> Ben

there's an omix-ada wiper motor link listed here:
http://www.discountjeepparts.com/cat...sort/5a/page/1

hope that's what you were looking for -

Re: Where to find 72 CJ5 Wiper Linkage
 

"Ben Reuter" <reutebh@earthlink.net> wrote in message news:<iKl6d.5285$r%4.1918@trndny05>...
> Could anyone point me in the direction of a company that sells a wiper
> linkage kit for a 72 CJ5- all the sites I have found only list them for 76
> and later, and neither Quadratec or 4WD could recommend anyone who might
> carry this. Thanks
>
> Ben

there's an omix-ada wiper motor link listed here:
http://www.discountjeepparts.com/cat...sort/5a/page/1

hope that's what you were looking for -

Re: Where to find 72 CJ5 Wiper Linkage
 

"Ben Reuter" <reutebh@earthlink.net> wrote in message news:<iKl6d.5285$r%4.1918@trndny05>...
> Could anyone point me in the direction of a company that sells a wiper
> linkage kit for a 72 CJ5- all the sites I have found only list them for 76
> and later, and neither Quadratec or 4WD could recommend anyone who might
> carry this. Thanks
>
> Ben

there's an omix-ada wiper motor link listed here:
http://www.discountjeepparts.com/cat...sort/5a/page/1

hope that's what you were looking for -

Re: Where to find 72 CJ5 Wiper Linkage
 

I think Ben was looking for the whole thing, like the pivot cranks
and push/pull bars, parts numbers: 4, 5, and 6:
http://www.discountjeepparts.com/cat...perdiagram.jpg
But, you found lots more than I.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

4x4girlie wrote:
>
> there's an omix-ada wiper motor link listed here:
> http://www.discountjeepparts.com/cat...sort/5a/page/1
>
> hope that's what you were looking for -

Re: Where to find 72 CJ5 Wiper Linkage
 

I think Ben was looking for the whole thing, like the pivot cranks
and push/pull bars, parts numbers: 4, 5, and 6:
http://www.discountjeepparts.com/cat...perdiagram.jpg
But, you found lots more than I.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

4x4girlie wrote:
>
> there's an omix-ada wiper motor link listed here:
> http://www.discountjeepparts.com/cat...sort/5a/page/1
>
> hope that's what you were looking for -

Re: Where to find 72 CJ5 Wiper Linkage
 

I think Ben was looking for the whole thing, like the pivot cranks
and push/pull bars, parts numbers: 4, 5, and 6:
http://www.discountjeepparts.com/cat...perdiagram.jpg
But, you found lots more than I.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

4x4girlie wrote:
>
> there's an omix-ada wiper motor link listed here:
> http://www.discountjeepparts.com/cat...sort/5a/page/1
>
> hope that's what you were looking for -

Re: Where to find 72 CJ5 Wiper Linkage
 

"Ben Reuter" <reutebh@earthlink.net> wrote in message news:<iKl6d.5285$r%4.1918@trndny05>...
> Could anyone point me in the direction of a company that sells a wiper
> linkage kit for a 72 CJ5- all the sites I have found only list them for 76
> and later, and neither Quadratec or 4WD could recommend anyone who might
> carry this. Thanks
>
> Ben

You can buy new flanged bronze bushings at your local bearing
distributer. The metal linkages should still be fine. I couldn't
find a source when I did mine either (1973 CJ5). The new frame I
bought did not have the windshield wiper pivot holes in the same place
as the original frame. I had to leangthen one linkage and shorten the
other to make them work. Keep your old stuff until you get your new
stuff done.

Re: Where to find 72 CJ5 Wiper Linkage
 

"Ben Reuter" <reutebh@earthlink.net> wrote in message news:<iKl6d.5285$r%4.1918@trndny05>...
> Could anyone point me in the direction of a company that sells a wiper
> linkage kit for a 72 CJ5- all the sites I have found only list them for 76
> and later, and neither Quadratec or 4WD could recommend anyone who might
> carry this. Thanks
>
> Ben

You can buy new flanged bronze bushings at your local bearing
distributer. The metal linkages should still be fine. I couldn't
find a source when I did mine either (1973 CJ5). The new frame I
bought did not have the windshield wiper pivot holes in the same place
as the original frame. I had to leangthen one linkage and shorten the
other to make them work. Keep your old stuff until you get your new
stuff done.

Re: Where to find 72 CJ5 Wiper Linkage
 

"Ben Reuter" <reutebh@earthlink.net> wrote in message news:<iKl6d.5285$r%4.1918@trndny05>...
> Could anyone point me in the direction of a company that sells a wiper
> linkage kit for a 72 CJ5- all the sites I have found only list them for 76
> and later, and neither Quadratec or 4WD could recommend anyone who might
> carry this. Thanks
>
> Ben

You can buy new flanged bronze bushings at your local bearing
distributer. The metal linkages should still be fine. I couldn't
find a source when I did mine either (1973 CJ5). The new frame I
bought did not have the windshield wiper pivot holes in the same place
as the original frame. I had to leangthen one linkage and shorten the
other to make them work. Keep your old stuff until you get your new
stuff done.

Re: Where to find 72 CJ5 Wiper Linkage
 

maybe try www.rockauto.com


"cj573cj5" <cj573cj5@yahoo.com> wrote in message
news:6f04a5f7.0409290831.487f76b@posting.google.co m...
> "Ben Reuter" <reutebh@earthlink.net> wrote in message
news:<iKl6d.5285$r%4.1918@trndny05>...
> > Could anyone point me in the direction of a company that sells a wiper
> > linkage kit for a 72 CJ5- all the sites I have found only list them for
76
> > and later, and neither Quadratec or 4WD could recommend anyone who might
> > carry this. Thanks
> >
> > Ben
>
> You can buy new flanged bronze bushings at your local bearing
> distributer. The metal linkages should still be fine. I couldn't
> find a source when I did mine either (1973 CJ5). The new frame I
> bought did not have the windshield wiper pivot holes in the same place
> as the original frame. I had to leangthen one linkage and shorten the
> other to make them work. Keep your old stuff until you get your new
> stuff done.