Wheel cleaning
Greetings. I just purchased a set of Aluminum wheels from a friend.
They are from his 98 Sahara, stock rims. The ones with the five hole pattern. I will be putting them on my 95 Sahara. I think it's gunna look really nice! Anywho my question is, what is the best way to clean them. They have some very light corrosion on them, but their not that bad. Any recommendations as far as cleaners go or scrubbing pads to use. I don't want to make them worse than what they are! Hopefully I can bring them back to good condition. Any advice would be helpful. Thanks, Greg |
Re: Wheel cleaning
After washing with a sponge/rag and a mild detergent use a clay bar
<available at your corner auto parts store> and then give them a coat of wax. Most of the store bought "wheel cleaners" and scrub pads/brushes are too harsh for regular use and will damage the finish. .. "jerryg" <Gregginn7@msn.com> wrote in message news:1175448560.264178.11080@n59g2000hsh.googlegro ups.com... > Greetings. I just purchased a set of Aluminum wheels from a friend. > They are from his 98 Sahara, stock rims. The ones with the five hole > pattern. I will be putting them on my 95 Sahara. I think it's gunna > look really nice! Anywho my question is, what is the best way to clean > them. They have some very light corrosion on them, but their not that > bad. Any recommendations as far as cleaners go or scrubbing pads to > use. I don't want to make them worse than what they are! Hopefully I > can bring them back to good condition. Any advice would be helpful. > > Thanks, > > Greg > |
Re: Wheel cleaning
After washing with a sponge/rag and a mild detergent use a clay bar
<available at your corner auto parts store> and then give them a coat of wax. Most of the store bought "wheel cleaners" and scrub pads/brushes are too harsh for regular use and will damage the finish. .. "jerryg" <Gregginn7@msn.com> wrote in message news:1175448560.264178.11080@n59g2000hsh.googlegro ups.com... > Greetings. I just purchased a set of Aluminum wheels from a friend. > They are from his 98 Sahara, stock rims. The ones with the five hole > pattern. I will be putting them on my 95 Sahara. I think it's gunna > look really nice! Anywho my question is, what is the best way to clean > them. They have some very light corrosion on them, but their not that > bad. Any recommendations as far as cleaners go or scrubbing pads to > use. I don't want to make them worse than what they are! Hopefully I > can bring them back to good condition. Any advice would be helpful. > > Thanks, > > Greg > |
Re: Wheel cleaning
After washing with a sponge/rag and a mild detergent use a clay bar
<available at your corner auto parts store> and then give them a coat of wax. Most of the store bought "wheel cleaners" and scrub pads/brushes are too harsh for regular use and will damage the finish. .. "jerryg" <Gregginn7@msn.com> wrote in message news:1175448560.264178.11080@n59g2000hsh.googlegro ups.com... > Greetings. I just purchased a set of Aluminum wheels from a friend. > They are from his 98 Sahara, stock rims. The ones with the five hole > pattern. I will be putting them on my 95 Sahara. I think it's gunna > look really nice! Anywho my question is, what is the best way to clean > them. They have some very light corrosion on them, but their not that > bad. Any recommendations as far as cleaners go or scrubbing pads to > use. I don't want to make them worse than what they are! Hopefully I > can bring them back to good condition. Any advice would be helpful. > > Thanks, > > Greg > |
Re: Wheel cleaning
On Apr 1, 12:33 pm, "billy ray" <billy_...@SPAMfuse.net> wrote:
> After washing with a sponge/rag and a mild detergent use a clay bar > <available at your corner auto parts store> and then give them a coat of > wax. > > Most of the store bought "wheel cleaners" and scrub pads/brushes are too > harsh for regular use and will damage the finish. > > ."jerryg" <Greggi...@msn.com> wrote in message > > news:1175448560.264178.11080@n59g2000hsh.googlegro ups.com... > > > > > Greetings. I just purchased a set of Aluminum wheels from a friend. > > They are from his 98 Sahara, stock rims. The ones with the five hole > > pattern. I will be putting them on my 95 Sahara. I think it's gunna > > look really nice! Anywho my question is, what is the best way to clean > > them. They have some very light corrosion on them, but their not that > > bad. Any recommendations as far as cleaners go or scrubbing pads to > > use. I don't want to make them worse than what they are! Hopefully I > > can bring them back to good condition. Any advice would be helpful. > > > Thanks, > > > Greg- Hide quoted text - > > - Show quoted text - Will that remove any light corrosion? Thanks. |
Re: Wheel cleaning
On Apr 1, 12:33 pm, "billy ray" <billy_...@SPAMfuse.net> wrote:
> After washing with a sponge/rag and a mild detergent use a clay bar > <available at your corner auto parts store> and then give them a coat of > wax. > > Most of the store bought "wheel cleaners" and scrub pads/brushes are too > harsh for regular use and will damage the finish. > > ."jerryg" <Greggi...@msn.com> wrote in message > > news:1175448560.264178.11080@n59g2000hsh.googlegro ups.com... > > > > > Greetings. I just purchased a set of Aluminum wheels from a friend. > > They are from his 98 Sahara, stock rims. The ones with the five hole > > pattern. I will be putting them on my 95 Sahara. I think it's gunna > > look really nice! Anywho my question is, what is the best way to clean > > them. They have some very light corrosion on them, but their not that > > bad. Any recommendations as far as cleaners go or scrubbing pads to > > use. I don't want to make them worse than what they are! Hopefully I > > can bring them back to good condition. Any advice would be helpful. > > > Thanks, > > > Greg- Hide quoted text - > > - Show quoted text - Will that remove any light corrosion? Thanks. |
Re: Wheel cleaning
On Apr 1, 12:33 pm, "billy ray" <billy_...@SPAMfuse.net> wrote:
> After washing with a sponge/rag and a mild detergent use a clay bar > <available at your corner auto parts store> and then give them a coat of > wax. > > Most of the store bought "wheel cleaners" and scrub pads/brushes are too > harsh for regular use and will damage the finish. > > ."jerryg" <Greggi...@msn.com> wrote in message > > news:1175448560.264178.11080@n59g2000hsh.googlegro ups.com... > > > > > Greetings. I just purchased a set of Aluminum wheels from a friend. > > They are from his 98 Sahara, stock rims. The ones with the five hole > > pattern. I will be putting them on my 95 Sahara. I think it's gunna > > look really nice! Anywho my question is, what is the best way to clean > > them. They have some very light corrosion on them, but their not that > > bad. Any recommendations as far as cleaners go or scrubbing pads to > > use. I don't want to make them worse than what they are! Hopefully I > > can bring them back to good condition. Any advice would be helpful. > > > Thanks, > > > Greg- Hide quoted text - > > - Show quoted text - Will that remove any light corrosion? Thanks. |
Re: Wheel cleaning
Some cleaning with a clay bar info. Jerry, you have e-mail http://www.autopia-carcare.com/inf-clay.html "jerryg" <Gregginn7@msn.com> wrote in message news:1175448906.951370.120670@b75g2000hsg.googlegr oups.com... > On Apr 1, 12:33 pm, "billy ray" <billy_...@SPAMfuse.net> wrote: >> After washing with a sponge/rag and a mild detergent use a clay bar >> <available at your corner auto parts store> and then give them a coat of >> wax. >> >> Most of the store bought "wheel cleaners" and scrub pads/brushes are too >> harsh for regular use and will damage the finish. >> >> ."jerryg" <Greggi...@msn.com> wrote in message >> >> news:1175448560.264178.11080@n59g2000hsh.googlegro ups.com... >> >> >> >> > Greetings. I just purchased a set of Aluminum wheels from a friend. >> > They are from his 98 Sahara, stock rims. The ones with the five hole >> > pattern. I will be putting them on my 95 Sahara. I think it's gunna >> > look really nice! Anywho my question is, what is the best way to clean >> > them. They have some very light corrosion on them, but their not that >> > bad. Any recommendations as far as cleaners go or scrubbing pads to >> > use. I don't want to make them worse than what they are! Hopefully I >> > can bring them back to good condition. Any advice would be helpful. >> >> > Thanks, >> >> > Greg- Hide quoted text - >> >> - Show quoted text - > > Will that remove any light corrosion? > > Thanks. > |
Re: Wheel cleaning
Some cleaning with a clay bar info. Jerry, you have e-mail http://www.autopia-carcare.com/inf-clay.html "jerryg" <Gregginn7@msn.com> wrote in message news:1175448906.951370.120670@b75g2000hsg.googlegr oups.com... > On Apr 1, 12:33 pm, "billy ray" <billy_...@SPAMfuse.net> wrote: >> After washing with a sponge/rag and a mild detergent use a clay bar >> <available at your corner auto parts store> and then give them a coat of >> wax. >> >> Most of the store bought "wheel cleaners" and scrub pads/brushes are too >> harsh for regular use and will damage the finish. >> >> ."jerryg" <Greggi...@msn.com> wrote in message >> >> news:1175448560.264178.11080@n59g2000hsh.googlegro ups.com... >> >> >> >> > Greetings. I just purchased a set of Aluminum wheels from a friend. >> > They are from his 98 Sahara, stock rims. The ones with the five hole >> > pattern. I will be putting them on my 95 Sahara. I think it's gunna >> > look really nice! Anywho my question is, what is the best way to clean >> > them. They have some very light corrosion on them, but their not that >> > bad. Any recommendations as far as cleaners go or scrubbing pads to >> > use. I don't want to make them worse than what they are! Hopefully I >> > can bring them back to good condition. Any advice would be helpful. >> >> > Thanks, >> >> > Greg- Hide quoted text - >> >> - Show quoted text - > > Will that remove any light corrosion? > > Thanks. > |
Re: Wheel cleaning
Some cleaning with a clay bar info. Jerry, you have e-mail http://www.autopia-carcare.com/inf-clay.html "jerryg" <Gregginn7@msn.com> wrote in message news:1175448906.951370.120670@b75g2000hsg.googlegr oups.com... > On Apr 1, 12:33 pm, "billy ray" <billy_...@SPAMfuse.net> wrote: >> After washing with a sponge/rag and a mild detergent use a clay bar >> <available at your corner auto parts store> and then give them a coat of >> wax. >> >> Most of the store bought "wheel cleaners" and scrub pads/brushes are too >> harsh for regular use and will damage the finish. >> >> ."jerryg" <Greggi...@msn.com> wrote in message >> >> news:1175448560.264178.11080@n59g2000hsh.googlegro ups.com... >> >> >> >> > Greetings. I just purchased a set of Aluminum wheels from a friend. >> > They are from his 98 Sahara, stock rims. The ones with the five hole >> > pattern. I will be putting them on my 95 Sahara. I think it's gunna >> > look really nice! Anywho my question is, what is the best way to clean >> > them. They have some very light corrosion on them, but their not that >> > bad. Any recommendations as far as cleaners go or scrubbing pads to >> > use. I don't want to make them worse than what they are! Hopefully I >> > can bring them back to good condition. Any advice would be helpful. >> >> > Thanks, >> >> > Greg- Hide quoted text - >> >> - Show quoted text - > > Will that remove any light corrosion? > > Thanks. > |
All times are GMT -4. The time now is 01:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands