What fits snuggly in output cone np231
Guest
Posts: n/a
What fits snuggly in output cone np231
Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
I want to pull the output shaft out to make the job easier but what is it
that fits snuggly in there to hold the fluid in? I know there's been
mention of a soda can or something?
Nick
--
http://members.***.net/nnote/
I want to pull the output shaft out to make the job easier but what is it
that fits snuggly in there to hold the fluid in? I know there's been
mention of a soda can or something?
Nick
--
http://members.***.net/nnote/
Guest
Posts: n/a
Re: What fits snuggly in output cone np231
That's if you have to drive it, while the slip joint is removed.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> I want to pull the output shaft out to make the job easier but what is it
> that fits snuggly in there to hold the fluid in? I know there's been
> mention of a soda can or something?
> Nick
>
> --
> http://members.***.net/nnote/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> I want to pull the output shaft out to make the job easier but what is it
> that fits snuggly in there to hold the fluid in? I know there's been
> mention of a soda can or something?
> Nick
>
> --
> http://members.***.net/nnote/
Guest
Posts: n/a
Re: What fits snuggly in output cone np231
That's if you have to drive it, while the slip joint is removed.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> I want to pull the output shaft out to make the job easier but what is it
> that fits snuggly in there to hold the fluid in? I know there's been
> mention of a soda can or something?
> Nick
>
> --
> http://members.***.net/nnote/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> I want to pull the output shaft out to make the job easier but what is it
> that fits snuggly in there to hold the fluid in? I know there's been
> mention of a soda can or something?
> Nick
>
> --
> http://members.***.net/nnote/
Guest
Posts: n/a
Re: What fits snuggly in output cone np231
That's if you have to drive it, while the slip joint is removed.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> I want to pull the output shaft out to make the job easier but what is it
> that fits snuggly in there to hold the fluid in? I know there's been
> mention of a soda can or something?
> Nick
>
> --
> http://members.***.net/nnote/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> I want to pull the output shaft out to make the job easier but what is it
> that fits snuggly in there to hold the fluid in? I know there's been
> mention of a soda can or something?
> Nick
>
> --
> http://members.***.net/nnote/
Guest
Posts: n/a
Re: What fits snuggly in output cone np231
Cool! Talk about stress relief.
Nick
--
http://members.***.net/nnote/
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:41B903A1.61B53844@***.net...
> That's if you have to drive it, while the slip joint is removed.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> > I want to pull the output shaft out to make the job easier but what is
it
> > that fits snuggly in there to hold the fluid in? I know there's been
> > mention of a soda can or something?
> > Nick
> >
> > --
> > http://members.***.net/nnote/
Nick
--
http://members.***.net/nnote/
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:41B903A1.61B53844@***.net...
> That's if you have to drive it, while the slip joint is removed.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> > I want to pull the output shaft out to make the job easier but what is
it
> > that fits snuggly in there to hold the fluid in? I know there's been
> > mention of a soda can or something?
> > Nick
> >
> > --
> > http://members.***.net/nnote/
Guest
Posts: n/a
Re: What fits snuggly in output cone np231
Cool! Talk about stress relief.
Nick
--
http://members.***.net/nnote/
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:41B903A1.61B53844@***.net...
> That's if you have to drive it, while the slip joint is removed.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> > I want to pull the output shaft out to make the job easier but what is
it
> > that fits snuggly in there to hold the fluid in? I know there's been
> > mention of a soda can or something?
> > Nick
> >
> > --
> > http://members.***.net/nnote/
Nick
--
http://members.***.net/nnote/
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:41B903A1.61B53844@***.net...
> That's if you have to drive it, while the slip joint is removed.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> > I want to pull the output shaft out to make the job easier but what is
it
> > that fits snuggly in there to hold the fluid in? I know there's been
> > mention of a soda can or something?
> > Nick
> >
> > --
> > http://members.***.net/nnote/
Guest
Posts: n/a
Re: What fits snuggly in output cone np231
Cool! Talk about stress relief.
Nick
--
http://members.***.net/nnote/
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:41B903A1.61B53844@***.net...
> That's if you have to drive it, while the slip joint is removed.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> > I want to pull the output shaft out to make the job easier but what is
it
> > that fits snuggly in there to hold the fluid in? I know there's been
> > mention of a soda can or something?
> > Nick
> >
> > --
> > http://members.***.net/nnote/
Nick
--
http://members.***.net/nnote/
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:41B903A1.61B53844@***.net...
> That's if you have to drive it, while the slip joint is removed.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> > I want to pull the output shaft out to make the job easier but what is
it
> > that fits snuggly in there to hold the fluid in? I know there's been
> > mention of a soda can or something?
> > Nick
> >
> > --
> > http://members.***.net/nnote/
Guest
Posts: n/a
Re: What fits snuggly in output cone np231
Yup, only about a teaspoon came out.
Nick
--
http://members.***.net/nnote/
"Nick" <nnote@despammed.com> wrote in message
news:Mk8ud.122$Sq.108@fed1read01...
> Cool! Talk about stress relief.
> Nick
>
>
> --
> http://members.***.net/nnote/
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41B903A1.61B53844@***.net...
> > That's if you have to drive it, while the slip joint is removed.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Nick wrote:
> > >
> > > Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> > > I want to pull the output shaft out to make the job easier but what is
> it
> > > that fits snuggly in there to hold the fluid in? I know there's been
> > > mention of a soda can or something?
> > > Nick
> > >
> > > --
> > > http://members.***.net/nnote/
>
>
Nick
--
http://members.***.net/nnote/
"Nick" <nnote@despammed.com> wrote in message
news:Mk8ud.122$Sq.108@fed1read01...
> Cool! Talk about stress relief.
> Nick
>
>
> --
> http://members.***.net/nnote/
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41B903A1.61B53844@***.net...
> > That's if you have to drive it, while the slip joint is removed.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Nick wrote:
> > >
> > > Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> > > I want to pull the output shaft out to make the job easier but what is
> it
> > > that fits snuggly in there to hold the fluid in? I know there's been
> > > mention of a soda can or something?
> > > Nick
> > >
> > > --
> > > http://members.***.net/nnote/
>
>
Guest
Posts: n/a
Re: What fits snuggly in output cone np231
Yup, only about a teaspoon came out.
Nick
--
http://members.***.net/nnote/
"Nick" <nnote@despammed.com> wrote in message
news:Mk8ud.122$Sq.108@fed1read01...
> Cool! Talk about stress relief.
> Nick
>
>
> --
> http://members.***.net/nnote/
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41B903A1.61B53844@***.net...
> > That's if you have to drive it, while the slip joint is removed.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Nick wrote:
> > >
> > > Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> > > I want to pull the output shaft out to make the job easier but what is
> it
> > > that fits snuggly in there to hold the fluid in? I know there's been
> > > mention of a soda can or something?
> > > Nick
> > >
> > > --
> > > http://members.***.net/nnote/
>
>
Nick
--
http://members.***.net/nnote/
"Nick" <nnote@despammed.com> wrote in message
news:Mk8ud.122$Sq.108@fed1read01...
> Cool! Talk about stress relief.
> Nick
>
>
> --
> http://members.***.net/nnote/
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41B903A1.61B53844@***.net...
> > That's if you have to drive it, while the slip joint is removed.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Nick wrote:
> > >
> > > Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> > > I want to pull the output shaft out to make the job easier but what is
> it
> > > that fits snuggly in there to hold the fluid in? I know there's been
> > > mention of a soda can or something?
> > > Nick
> > >
> > > --
> > > http://members.***.net/nnote/
>
>
Guest
Posts: n/a
Re: What fits snuggly in output cone np231
Yup, only about a teaspoon came out.
Nick
--
http://members.***.net/nnote/
"Nick" <nnote@despammed.com> wrote in message
news:Mk8ud.122$Sq.108@fed1read01...
> Cool! Talk about stress relief.
> Nick
>
>
> --
> http://members.***.net/nnote/
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41B903A1.61B53844@***.net...
> > That's if you have to drive it, while the slip joint is removed.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Nick wrote:
> > >
> > > Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> > > I want to pull the output shaft out to make the job easier but what is
> it
> > > that fits snuggly in there to hold the fluid in? I know there's been
> > > mention of a soda can or something?
> > > Nick
> > >
> > > --
> > > http://members.***.net/nnote/
>
>
Nick
--
http://members.***.net/nnote/
"Nick" <nnote@despammed.com> wrote in message
news:Mk8ud.122$Sq.108@fed1read01...
> Cool! Talk about stress relief.
> Nick
>
>
> --
> http://members.***.net/nnote/
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41B903A1.61B53844@***.net...
> > That's if you have to drive it, while the slip joint is removed.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Nick wrote:
> > >
> > > Blew a u-joint today on my 93yj 2.5l on the rear driveshaft.
> > > I want to pull the output shaft out to make the job easier but what is
> it
> > > that fits snuggly in there to hold the fluid in? I know there's been
> > > mention of a soda can or something?
> > > Nick
> > >
> > > --
> > > http://members.***.net/nnote/
>
>
Thread
Thread Starter
Forum
Replies
Last Post
gulkster
Jeep YJ Forum
2
Aug 13, 2011 01:53 AM
greg_k
Jeep Mailing List
0
Nov 18, 2003 03:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)