What did you pay for your new Jeep Grand Cherokee?
Guest
Posts: n/a
Re: I wanted to thank all you AHOLES for responding to my post!!!!!!!!!!!!!
You're welcome.
"Kev" <kblitz9@yahoo.com> wrote in message
news:467e28b2.0412021930.1305537e@posting.google.c om...
> Eat ----
>
>
> kblitz9@yahoo.com (Kev) wrote in message
news:<467e28b2.0412011032.16ed0053@posting.google. com>...
> > Hi all...I just test drove the 2005 Grand Cherokee. Very nice.
> > I was hoping I can hear of some good deals that people paid for there
> > new Jeep.
> > I live on the east coast in NYC.
> > Did you receive any incentives, cash back. What are the current
> > incentives, etc.
> > How much over invoice did you pay?
> >
> > Has anyone has leased or "smart-buyed"? I'm looking into that as
> > well, so please share your buying experience/advice, etc.
> >
> > Thanks so much
"Kev" <kblitz9@yahoo.com> wrote in message
news:467e28b2.0412021930.1305537e@posting.google.c om...
> Eat ----
>
>
> kblitz9@yahoo.com (Kev) wrote in message
news:<467e28b2.0412011032.16ed0053@posting.google. com>...
> > Hi all...I just test drove the 2005 Grand Cherokee. Very nice.
> > I was hoping I can hear of some good deals that people paid for there
> > new Jeep.
> > I live on the east coast in NYC.
> > Did you receive any incentives, cash back. What are the current
> > incentives, etc.
> > How much over invoice did you pay?
> >
> > Has anyone has leased or "smart-buyed"? I'm looking into that as
> > well, so please share your buying experience/advice, etc.
> >
> > Thanks so much
Guest
Posts: n/a
Re: [OT] Welding, spring questions re trailer for my Jeep
Hi Lee,
Yes, replace the brass bushings:
http://www.apple.queensu.ca/CJ3B/Pho...earSprings.gif Although,
you'll probably have to have them made.
I would gas weld the fender, tapping it with a hammer and wet rag
to heat shrink it. I don't see a reason for a gusset, unless it's at a
major support.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lee Ayrton wrote:
>
> This is admittedly off-topic, my only excuse is that the trailer will be
> dragged^W towed behind my CJ and youse guys know stuff.
>
> This is a small, all steel utility trailer. I bought it from the original
> owner, he bought it new from Sears, Roebuck & Co in 1947. The data plate
> only says Sears, Roebuck & Co., no manufacturer's name. It weighs about
> 600#.
>
> First: I notice that the greasable(!) spring shackles don't have rubber
> bushings around them, they have about 1/4" of slop all the way around in
> the eye. I should put in spring bushings, yes? Otherwise there's no
> reason to grease the things, right?
>
> Second: A welding question. IANAWelder, but I can burn holes in stuff
> with electricity and make ugly puddles of melted metal. One fender has a
> 1" long crack running up the center of the front edge of the fender, it
> looks like it is simply fatigue from the fender being leaned on during
> loading/unloading. I'm guessing that if I drag out my little wire welder
> and run over the crack it'll just come back. Should I add a strip of
> sheet metal behind the crack first to act as a stiffener?
>
> Thanks.
>
> --
> Some conditions apply. YMMV. This message was packed by weight, not
> by volume. TWIAVBP, local variation may occur. Dramatization, not a real
> authority. Do not induce vomiting. No user-serviceable words inside.
Yes, replace the brass bushings:
http://www.apple.queensu.ca/CJ3B/Pho...earSprings.gif Although,
you'll probably have to have them made.
I would gas weld the fender, tapping it with a hammer and wet rag
to heat shrink it. I don't see a reason for a gusset, unless it's at a
major support.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lee Ayrton wrote:
>
> This is admittedly off-topic, my only excuse is that the trailer will be
> dragged^W towed behind my CJ and youse guys know stuff.
>
> This is a small, all steel utility trailer. I bought it from the original
> owner, he bought it new from Sears, Roebuck & Co in 1947. The data plate
> only says Sears, Roebuck & Co., no manufacturer's name. It weighs about
> 600#.
>
> First: I notice that the greasable(!) spring shackles don't have rubber
> bushings around them, they have about 1/4" of slop all the way around in
> the eye. I should put in spring bushings, yes? Otherwise there's no
> reason to grease the things, right?
>
> Second: A welding question. IANAWelder, but I can burn holes in stuff
> with electricity and make ugly puddles of melted metal. One fender has a
> 1" long crack running up the center of the front edge of the fender, it
> looks like it is simply fatigue from the fender being leaned on during
> loading/unloading. I'm guessing that if I drag out my little wire welder
> and run over the crack it'll just come back. Should I add a strip of
> sheet metal behind the crack first to act as a stiffener?
>
> Thanks.
>
> --
> Some conditions apply. YMMV. This message was packed by weight, not
> by volume. TWIAVBP, local variation may occur. Dramatization, not a real
> authority. Do not induce vomiting. No user-serviceable words inside.
Guest
Posts: n/a
Re: [OT] Welding, spring questions re trailer for my Jeep
Hi Lee,
Yes, replace the brass bushings:
http://www.apple.queensu.ca/CJ3B/Pho...earSprings.gif Although,
you'll probably have to have them made.
I would gas weld the fender, tapping it with a hammer and wet rag
to heat shrink it. I don't see a reason for a gusset, unless it's at a
major support.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lee Ayrton wrote:
>
> This is admittedly off-topic, my only excuse is that the trailer will be
> dragged^W towed behind my CJ and youse guys know stuff.
>
> This is a small, all steel utility trailer. I bought it from the original
> owner, he bought it new from Sears, Roebuck & Co in 1947. The data plate
> only says Sears, Roebuck & Co., no manufacturer's name. It weighs about
> 600#.
>
> First: I notice that the greasable(!) spring shackles don't have rubber
> bushings around them, they have about 1/4" of slop all the way around in
> the eye. I should put in spring bushings, yes? Otherwise there's no
> reason to grease the things, right?
>
> Second: A welding question. IANAWelder, but I can burn holes in stuff
> with electricity and make ugly puddles of melted metal. One fender has a
> 1" long crack running up the center of the front edge of the fender, it
> looks like it is simply fatigue from the fender being leaned on during
> loading/unloading. I'm guessing that if I drag out my little wire welder
> and run over the crack it'll just come back. Should I add a strip of
> sheet metal behind the crack first to act as a stiffener?
>
> Thanks.
>
> --
> Some conditions apply. YMMV. This message was packed by weight, not
> by volume. TWIAVBP, local variation may occur. Dramatization, not a real
> authority. Do not induce vomiting. No user-serviceable words inside.
Yes, replace the brass bushings:
http://www.apple.queensu.ca/CJ3B/Pho...earSprings.gif Although,
you'll probably have to have them made.
I would gas weld the fender, tapping it with a hammer and wet rag
to heat shrink it. I don't see a reason for a gusset, unless it's at a
major support.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lee Ayrton wrote:
>
> This is admittedly off-topic, my only excuse is that the trailer will be
> dragged^W towed behind my CJ and youse guys know stuff.
>
> This is a small, all steel utility trailer. I bought it from the original
> owner, he bought it new from Sears, Roebuck & Co in 1947. The data plate
> only says Sears, Roebuck & Co., no manufacturer's name. It weighs about
> 600#.
>
> First: I notice that the greasable(!) spring shackles don't have rubber
> bushings around them, they have about 1/4" of slop all the way around in
> the eye. I should put in spring bushings, yes? Otherwise there's no
> reason to grease the things, right?
>
> Second: A welding question. IANAWelder, but I can burn holes in stuff
> with electricity and make ugly puddles of melted metal. One fender has a
> 1" long crack running up the center of the front edge of the fender, it
> looks like it is simply fatigue from the fender being leaned on during
> loading/unloading. I'm guessing that if I drag out my little wire welder
> and run over the crack it'll just come back. Should I add a strip of
> sheet metal behind the crack first to act as a stiffener?
>
> Thanks.
>
> --
> Some conditions apply. YMMV. This message was packed by weight, not
> by volume. TWIAVBP, local variation may occur. Dramatization, not a real
> authority. Do not induce vomiting. No user-serviceable words inside.
Guest
Posts: n/a
Re: [OT] Welding, spring questions re trailer for my Jeep
Hi Lee,
Yes, replace the brass bushings:
http://www.apple.queensu.ca/CJ3B/Pho...earSprings.gif Although,
you'll probably have to have them made.
I would gas weld the fender, tapping it with a hammer and wet rag
to heat shrink it. I don't see a reason for a gusset, unless it's at a
major support.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lee Ayrton wrote:
>
> This is admittedly off-topic, my only excuse is that the trailer will be
> dragged^W towed behind my CJ and youse guys know stuff.
>
> This is a small, all steel utility trailer. I bought it from the original
> owner, he bought it new from Sears, Roebuck & Co in 1947. The data plate
> only says Sears, Roebuck & Co., no manufacturer's name. It weighs about
> 600#.
>
> First: I notice that the greasable(!) spring shackles don't have rubber
> bushings around them, they have about 1/4" of slop all the way around in
> the eye. I should put in spring bushings, yes? Otherwise there's no
> reason to grease the things, right?
>
> Second: A welding question. IANAWelder, but I can burn holes in stuff
> with electricity and make ugly puddles of melted metal. One fender has a
> 1" long crack running up the center of the front edge of the fender, it
> looks like it is simply fatigue from the fender being leaned on during
> loading/unloading. I'm guessing that if I drag out my little wire welder
> and run over the crack it'll just come back. Should I add a strip of
> sheet metal behind the crack first to act as a stiffener?
>
> Thanks.
>
> --
> Some conditions apply. YMMV. This message was packed by weight, not
> by volume. TWIAVBP, local variation may occur. Dramatization, not a real
> authority. Do not induce vomiting. No user-serviceable words inside.
Yes, replace the brass bushings:
http://www.apple.queensu.ca/CJ3B/Pho...earSprings.gif Although,
you'll probably have to have them made.
I would gas weld the fender, tapping it with a hammer and wet rag
to heat shrink it. I don't see a reason for a gusset, unless it's at a
major support.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lee Ayrton wrote:
>
> This is admittedly off-topic, my only excuse is that the trailer will be
> dragged^W towed behind my CJ and youse guys know stuff.
>
> This is a small, all steel utility trailer. I bought it from the original
> owner, he bought it new from Sears, Roebuck & Co in 1947. The data plate
> only says Sears, Roebuck & Co., no manufacturer's name. It weighs about
> 600#.
>
> First: I notice that the greasable(!) spring shackles don't have rubber
> bushings around them, they have about 1/4" of slop all the way around in
> the eye. I should put in spring bushings, yes? Otherwise there's no
> reason to grease the things, right?
>
> Second: A welding question. IANAWelder, but I can burn holes in stuff
> with electricity and make ugly puddles of melted metal. One fender has a
> 1" long crack running up the center of the front edge of the fender, it
> looks like it is simply fatigue from the fender being leaned on during
> loading/unloading. I'm guessing that if I drag out my little wire welder
> and run over the crack it'll just come back. Should I add a strip of
> sheet metal behind the crack first to act as a stiffener?
>
> Thanks.
>
> --
> Some conditions apply. YMMV. This message was packed by weight, not
> by volume. TWIAVBP, local variation may occur. Dramatization, not a real
> authority. Do not induce vomiting. No user-serviceable words inside.
Guest
Posts: n/a
Re: I wanted to thank all you AHOLES for responding to my post!!!!!!!!!!!!!
So.......If I didn't respond, does that mean I'm not an "AHOLE"?
--
Ray
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) AC9H )_)
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:10r18fobmheuu4f@corp.supernews.com...
> You're welcome.
>
>
>
> "Kev" <kblitz9@yahoo.com> wrote in message
> news:467e28b2.0412021930.1305537e@posting.google.c om...
>> Eat ----
>>
>>
>> kblitz9@yahoo.com (Kev) wrote in message
> news:<467e28b2.0412011032.16ed0053@posting.google. com>...
>> > Hi all...I just test drove the 2005 Grand Cherokee. Very nice.
>> > I was hoping I can hear of some good deals that people paid for there
>> > new Jeep.
>> > I live on the east coast in NYC.
>> > Did you receive any incentives, cash back. What are the current
>> > incentives, etc.
>> > How much over invoice did you pay?
>> >
>> > Has anyone has leased or "smart-buyed"? I'm looking into that as
>> > well, so please share your buying experience/advice, etc.
>> >
>> > Thanks so much
>
>
--
Ray
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) AC9H )_)
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:10r18fobmheuu4f@corp.supernews.com...
> You're welcome.
>
>
>
> "Kev" <kblitz9@yahoo.com> wrote in message
> news:467e28b2.0412021930.1305537e@posting.google.c om...
>> Eat ----
>>
>>
>> kblitz9@yahoo.com (Kev) wrote in message
> news:<467e28b2.0412011032.16ed0053@posting.google. com>...
>> > Hi all...I just test drove the 2005 Grand Cherokee. Very nice.
>> > I was hoping I can hear of some good deals that people paid for there
>> > new Jeep.
>> > I live on the east coast in NYC.
>> > Did you receive any incentives, cash back. What are the current
>> > incentives, etc.
>> > How much over invoice did you pay?
>> >
>> > Has anyone has leased or "smart-buyed"? I'm looking into that as
>> > well, so please share your buying experience/advice, etc.
>> >
>> > Thanks so much
>
>
Guest
Posts: n/a
Re: I wanted to thank all you AHOLES for responding to my post!!!!!!!!!!!!!
So.......If I didn't respond, does that mean I'm not an "AHOLE"?
--
Ray
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) AC9H )_)
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:10r18fobmheuu4f@corp.supernews.com...
> You're welcome.
>
>
>
> "Kev" <kblitz9@yahoo.com> wrote in message
> news:467e28b2.0412021930.1305537e@posting.google.c om...
>> Eat ----
>>
>>
>> kblitz9@yahoo.com (Kev) wrote in message
> news:<467e28b2.0412011032.16ed0053@posting.google. com>...
>> > Hi all...I just test drove the 2005 Grand Cherokee. Very nice.
>> > I was hoping I can hear of some good deals that people paid for there
>> > new Jeep.
>> > I live on the east coast in NYC.
>> > Did you receive any incentives, cash back. What are the current
>> > incentives, etc.
>> > How much over invoice did you pay?
>> >
>> > Has anyone has leased or "smart-buyed"? I'm looking into that as
>> > well, so please share your buying experience/advice, etc.
>> >
>> > Thanks so much
>
>
--
Ray
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) AC9H )_)
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:10r18fobmheuu4f@corp.supernews.com...
> You're welcome.
>
>
>
> "Kev" <kblitz9@yahoo.com> wrote in message
> news:467e28b2.0412021930.1305537e@posting.google.c om...
>> Eat ----
>>
>>
>> kblitz9@yahoo.com (Kev) wrote in message
> news:<467e28b2.0412011032.16ed0053@posting.google. com>...
>> > Hi all...I just test drove the 2005 Grand Cherokee. Very nice.
>> > I was hoping I can hear of some good deals that people paid for there
>> > new Jeep.
>> > I live on the east coast in NYC.
>> > Did you receive any incentives, cash back. What are the current
>> > incentives, etc.
>> > How much over invoice did you pay?
>> >
>> > Has anyone has leased or "smart-buyed"? I'm looking into that as
>> > well, so please share your buying experience/advice, etc.
>> >
>> > Thanks so much
>
>
Guest
Posts: n/a
Re: I wanted to thank all you AHOLES for responding to my post!!!!!!!!!!!!!
So.......If I didn't respond, does that mean I'm not an "AHOLE"?
--
Ray
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) AC9H )_)
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:10r18fobmheuu4f@corp.supernews.com...
> You're welcome.
>
>
>
> "Kev" <kblitz9@yahoo.com> wrote in message
> news:467e28b2.0412021930.1305537e@posting.google.c om...
>> Eat ----
>>
>>
>> kblitz9@yahoo.com (Kev) wrote in message
> news:<467e28b2.0412011032.16ed0053@posting.google. com>...
>> > Hi all...I just test drove the 2005 Grand Cherokee. Very nice.
>> > I was hoping I can hear of some good deals that people paid for there
>> > new Jeep.
>> > I live on the east coast in NYC.
>> > Did you receive any incentives, cash back. What are the current
>> > incentives, etc.
>> > How much over invoice did you pay?
>> >
>> > Has anyone has leased or "smart-buyed"? I'm looking into that as
>> > well, so please share your buying experience/advice, etc.
>> >
>> > Thanks so much
>
>
--
Ray
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) AC9H )_)
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:10r18fobmheuu4f@corp.supernews.com...
> You're welcome.
>
>
>
> "Kev" <kblitz9@yahoo.com> wrote in message
> news:467e28b2.0412021930.1305537e@posting.google.c om...
>> Eat ----
>>
>>
>> kblitz9@yahoo.com (Kev) wrote in message
> news:<467e28b2.0412011032.16ed0053@posting.google. com>...
>> > Hi all...I just test drove the 2005 Grand Cherokee. Very nice.
>> > I was hoping I can hear of some good deals that people paid for there
>> > new Jeep.
>> > I live on the east coast in NYC.
>> > Did you receive any incentives, cash back. What are the current
>> > incentives, etc.
>> > How much over invoice did you pay?
>> >
>> > Has anyone has leased or "smart-buyed"? I'm looking into that as
>> > well, so please share your buying experience/advice, etc.
>> >
>> > Thanks so much
>
>
Guest
Posts: n/a
Re: I wanted to thank all you AHOLES for responding to mypost!!!!!!!!!!!!!
You asked if I know Poncho Villa, with the great big guns? Why yes,
we had lunch together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> You're welcome.
we had lunch together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> You're welcome.
Guest
Posts: n/a
Re: I wanted to thank all you AHOLES for responding to mypost!!!!!!!!!!!!!
You asked if I know Poncho Villa, with the great big guns? Why yes,
we had lunch together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> You're welcome.
we had lunch together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> You're welcome.
Guest
Posts: n/a
Re: I wanted to thank all you AHOLES for responding to mypost!!!!!!!!!!!!!
You asked if I know Poncho Villa, with the great big guns? Why yes,
we had lunch together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> You're welcome.
we had lunch together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> You're welcome.