well that worked like a charm :/
 

note: if you have to glue up the plastic fiddly bits
JB weld will not hold on some plastics. Generally I get
good results with the stuff, but not this time.

Tried a bit on the AC knob and it hardens well, just doesn't
stick. Got to be the type of plastic. The only two that
JB doesn't stick to are Polypropylene and Polyethylene. So
it's got to be Polypropylene. The other is plastic sheeting stuff.

Oh well, off to get some 3M epoxy for polypropylene.

--
DougW
I have found that with much effort most all adhesives can bond
skin, denim, and hair.

Re: well that worked like a charm :/
 

Try Gorilla Glue, that stuff is pretty amazing. It sticks things
together like iron that nothing else I tried worked on. Plastics,
metal, ceramics, wood, etc.



DougW wrote:
> note: if you have to glue up the plastic fiddly bits
> JB weld will not hold on some plastics. Generally I get
> good results with the stuff, but not this time.
>
> Tried a bit on the AC knob and it hardens well, just doesn't
> stick. Got to be the type of plastic. The only two that
> JB doesn't stick to are Polypropylene and Polyethylene. So
> it's got to be Polypropylene. The other is plastic sheeting stuff.
>
> Oh well, off to get some 3M epoxy for polypropylene.
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/

Re: well that worked like a charm :/
 

Try Gorilla Glue, that stuff is pretty amazing. It sticks things
together like iron that nothing else I tried worked on. Plastics,
metal, ceramics, wood, etc.



DougW wrote:
> note: if you have to glue up the plastic fiddly bits
> JB weld will not hold on some plastics. Generally I get
> good results with the stuff, but not this time.
>
> Tried a bit on the AC knob and it hardens well, just doesn't
> stick. Got to be the type of plastic. The only two that
> JB doesn't stick to are Polypropylene and Polyethylene. So
> it's got to be Polypropylene. The other is plastic sheeting stuff.
>
> Oh well, off to get some 3M epoxy for polypropylene.
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/

Re: well that worked like a charm :/
 

Try Gorilla Glue, that stuff is pretty amazing. It sticks things
together like iron that nothing else I tried worked on. Plastics,
metal, ceramics, wood, etc.



DougW wrote:
> note: if you have to glue up the plastic fiddly bits
> JB weld will not hold on some plastics. Generally I get
> good results with the stuff, but not this time.
>
> Tried a bit on the AC knob and it hardens well, just doesn't
> stick. Got to be the type of plastic. The only two that
> JB doesn't stick to are Polypropylene and Polyethylene. So
> it's got to be Polypropylene. The other is plastic sheeting stuff.
>
> Oh well, off to get some 3M epoxy for polypropylene.
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/

Re: well that worked like a charm :/
 

I've used Gorilla Glue on plastic and it worked well. The repair is ugly
because it "foams' as it cures but holds tenaciously.

Make sure you do not get it on your skin as it will stay until that layer of
skin sloughs off.



"Jerry Bransford" <jerrypb@cox.net> wrote in message
news:UuGsf.1535$V.1057@fed1read04...
> Try Gorilla Glue, that stuff is pretty amazing. It sticks things together
> like iron that nothing else I tried worked on. Plastics, metal, ceramics,
> wood, etc.
>
>
>
> DougW wrote:
>> note: if you have to glue up the plastic fiddly bits
>> JB weld will not hold on some plastics. Generally I get
>> good results with the stuff, but not this time.
>>
>> Tried a bit on the AC knob and it hardens well, just doesn't
>> stick. Got to be the type of plastic. The only two that
>> JB doesn't stick to are Polypropylene and Polyethylene. So
>> it's got to be Polypropylene. The other is plastic sheeting stuff.
>>
>> Oh well, off to get some 3M epoxy for polypropylene.
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.cox.net/jerrypb/

Re: well that worked like a charm :/
 

I've used Gorilla Glue on plastic and it worked well. The repair is ugly
because it "foams' as it cures but holds tenaciously.

Make sure you do not get it on your skin as it will stay until that layer of
skin sloughs off.



"Jerry Bransford" <jerrypb@cox.net> wrote in message
news:UuGsf.1535$V.1057@fed1read04...
> Try Gorilla Glue, that stuff is pretty amazing. It sticks things together
> like iron that nothing else I tried worked on. Plastics, metal, ceramics,
> wood, etc.
>
>
>
> DougW wrote:
>> note: if you have to glue up the plastic fiddly bits
>> JB weld will not hold on some plastics. Generally I get
>> good results with the stuff, but not this time.
>>
>> Tried a bit on the AC knob and it hardens well, just doesn't
>> stick. Got to be the type of plastic. The only two that
>> JB doesn't stick to are Polypropylene and Polyethylene. So
>> it's got to be Polypropylene. The other is plastic sheeting stuff.
>>
>> Oh well, off to get some 3M epoxy for polypropylene.
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.cox.net/jerrypb/

Re: well that worked like a charm :/
 

I've used Gorilla Glue on plastic and it worked well. The repair is ugly
because it "foams' as it cures but holds tenaciously.

Make sure you do not get it on your skin as it will stay until that layer of
skin sloughs off.



"Jerry Bransford" <jerrypb@cox.net> wrote in message
news:UuGsf.1535$V.1057@fed1read04...
> Try Gorilla Glue, that stuff is pretty amazing. It sticks things together
> like iron that nothing else I tried worked on. Plastics, metal, ceramics,
> wood, etc.
>
>
>
> DougW wrote:
>> note: if you have to glue up the plastic fiddly bits
>> JB weld will not hold on some plastics. Generally I get
>> good results with the stuff, but not this time.
>>
>> Tried a bit on the AC knob and it hardens well, just doesn't
>> stick. Got to be the type of plastic. The only two that
>> JB doesn't stick to are Polypropylene and Polyethylene. So
>> it's got to be Polypropylene. The other is plastic sheeting stuff.
>>
>> Oh well, off to get some 3M epoxy for polypropylene.
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.cox.net/jerrypb/

Re: well that worked like a charm :/
 

billy ray did pass the time by typing:
> I've used Gorilla Glue on plastic and it worked well. The repair is ugly
> because it "foams' as it cures but holds tenaciously.

That should be ok because it's on the backside of the knob. A bit of masking
tape should keep things "clean".

> Make sure you do not get it on your skin as it will stay until that layer of
> skin sloughs off.

I've got an angle grinder and brush wheel that can take anything off skin. :]

> "Jerry Bransford" wrote ...
>> Try Gorilla Glue, that stuff is pretty amazing. It sticks things together
>> like iron that nothing else I tried worked on. Plastics, metal, ceramics,
>> wood, etc.

Thanks

--
DougW

Re: well that worked like a charm :/
 

billy ray did pass the time by typing:
> I've used Gorilla Glue on plastic and it worked well. The repair is ugly
> because it "foams' as it cures but holds tenaciously.

That should be ok because it's on the backside of the knob. A bit of masking
tape should keep things "clean".

> Make sure you do not get it on your skin as it will stay until that layer of
> skin sloughs off.

I've got an angle grinder and brush wheel that can take anything off skin. :]

> "Jerry Bransford" wrote ...
>> Try Gorilla Glue, that stuff is pretty amazing. It sticks things together
>> like iron that nothing else I tried worked on. Plastics, metal, ceramics,
>> wood, etc.

Thanks

--
DougW

Re: well that worked like a charm :/
 

billy ray did pass the time by typing:
> I've used Gorilla Glue on plastic and it worked well. The repair is ugly
> because it "foams' as it cures but holds tenaciously.

That should be ok because it's on the backside of the knob. A bit of masking
tape should keep things "clean".

> Make sure you do not get it on your skin as it will stay until that layer of
> skin sloughs off.

I've got an angle grinder and brush wheel that can take anything off skin. :]

> "Jerry Bransford" wrote ...
>> Try Gorilla Glue, that stuff is pretty amazing. It sticks things together
>> like iron that nothing else I tried worked on. Plastics, metal, ceramics,
>> wood, etc.

Thanks

--
DougW

Re: well that worked like a charm :/
 

Why do I see the image of the "Tool Time" show, where Tim glues his head to
the table coming along soon... Doug with his fingers glued to his wire
wheel... :)

Snow...


"DougW" <post.replies@invalid.address> wrote in message
news:EXIsf.35787$---.22745@dukeread07...
> billy ray did pass the time by typing:
>> I've used Gorilla Glue on plastic and it worked well. The repair is ugly
>> because it "foams' as it cures but holds tenaciously.
>
> That should be ok because it's on the backside of the knob. A bit of
> masking
> tape should keep things "clean".
>
>> Make sure you do not get it on your skin as it will stay until that layer
>> of
>> skin sloughs off.
>
> I've got an angle grinder and brush wheel that can take anything off skin.
> :]
>
>> "Jerry Bransford" wrote ...
>>> Try Gorilla Glue, that stuff is pretty amazing. It sticks things
>>> together
>>> like iron that nothing else I tried worked on. Plastics, metal,
>>> ceramics,
>>> wood, etc.
>
> Thanks
>
> --
> DougW
>

Re: well that worked like a charm :/
 

Why do I see the image of the "Tool Time" show, where Tim glues his head to
the table coming along soon... Doug with his fingers glued to his wire
wheel... :)

Snow...


"DougW" <post.replies@invalid.address> wrote in message
news:EXIsf.35787$---.22745@dukeread07...
> billy ray did pass the time by typing:
>> I've used Gorilla Glue on plastic and it worked well. The repair is ugly
>> because it "foams' as it cures but holds tenaciously.
>
> That should be ok because it's on the backside of the knob. A bit of
> masking
> tape should keep things "clean".
>
>> Make sure you do not get it on your skin as it will stay until that layer
>> of
>> skin sloughs off.
>
> I've got an angle grinder and brush wheel that can take anything off skin.
> :]
>
>> "Jerry Bransford" wrote ...
>>> Try Gorilla Glue, that stuff is pretty amazing. It sticks things
>>> together
>>> like iron that nothing else I tried worked on. Plastics, metal,
>>> ceramics,
>>> wood, etc.
>
> Thanks
>
> --
> DougW
>

Re: well that worked like a charm :/
 

Why do I see the image of the "Tool Time" show, where Tim glues his head to
the table coming along soon... Doug with his fingers glued to his wire
wheel... :)

Snow...


"DougW" <post.replies@invalid.address> wrote in message
news:EXIsf.35787$---.22745@dukeread07...
> billy ray did pass the time by typing:
>> I've used Gorilla Glue on plastic and it worked well. The repair is ugly
>> because it "foams' as it cures but holds tenaciously.
>
> That should be ok because it's on the backside of the knob. A bit of
> masking
> tape should keep things "clean".
>
>> Make sure you do not get it on your skin as it will stay until that layer
>> of
>> skin sloughs off.
>
> I've got an angle grinder and brush wheel that can take anything off skin.
> :]
>
>> "Jerry Bransford" wrote ...
>>> Try Gorilla Glue, that stuff is pretty amazing. It sticks things
>>> together
>>> like iron that nothing else I tried worked on. Plastics, metal,
>>> ceramics,
>>> wood, etc.
>
> Thanks
>
> --
> DougW
>

Re: well that worked like a charm :/
 

Polyethylene can be formed also. It can be made into toys, plastic snow
shovels, Jeep gas tanks, ropes and lots of stuff in fact. What you have is
not necessarily polypropylene. Good luck with the 3M epoxy anyway.

Earle

"DougW" <post.replies@invalid.address> wrote in message
news:S8Fsf.35756$---.27754@dukeread07...
> note: if you have to glue up the plastic fiddly bits
> JB weld will not hold on some plastics. Generally I get
> good results with the stuff, but not this time.
>
> Tried a bit on the AC knob and it hardens well, just doesn't
> stick. Got to be the type of plastic. The only two that
> JB doesn't stick to are Polypropylene and Polyethylene. So
> it's got to be Polypropylene. The other is plastic sheeting stuff.
>
> Oh well, off to get some 3M epoxy for polypropylene.
>
> --
> DougW
> I have found that with much effort most all adhesives can bond
> skin, denim, and hair.
>
>

Re: well that worked like a charm :/
 

Polyethylene can be formed also. It can be made into toys, plastic snow
shovels, Jeep gas tanks, ropes and lots of stuff in fact. What you have is
not necessarily polypropylene. Good luck with the 3M epoxy anyway.

Earle

"DougW" <post.replies@invalid.address> wrote in message
news:S8Fsf.35756$---.27754@dukeread07...
> note: if you have to glue up the plastic fiddly bits
> JB weld will not hold on some plastics. Generally I get
> good results with the stuff, but not this time.
>
> Tried a bit on the AC knob and it hardens well, just doesn't
> stick. Got to be the type of plastic. The only two that
> JB doesn't stick to are Polypropylene and Polyethylene. So
> it's got to be Polypropylene. The other is plastic sheeting stuff.
>
> Oh well, off to get some 3M epoxy for polypropylene.
>
> --
> DougW
> I have found that with much effort most all adhesives can bond
> skin, denim, and hair.
>
>

Re: well that worked like a charm :/
 

Polyethylene can be formed also. It can be made into toys, plastic snow
shovels, Jeep gas tanks, ropes and lots of stuff in fact. What you have is
not necessarily polypropylene. Good luck with the 3M epoxy anyway.

Earle

"DougW" <post.replies@invalid.address> wrote in message
news:S8Fsf.35756$---.27754@dukeread07...
> note: if you have to glue up the plastic fiddly bits
> JB weld will not hold on some plastics. Generally I get
> good results with the stuff, but not this time.
>
> Tried a bit on the AC knob and it hardens well, just doesn't
> stick. Got to be the type of plastic. The only two that
> JB doesn't stick to are Polypropylene and Polyethylene. So
> it's got to be Polypropylene. The other is plastic sheeting stuff.
>
> Oh well, off to get some 3M epoxy for polypropylene.
>
> --
> DougW
> I have found that with much effort most all adhesives can bond
> skin, denim, and hair.
>
>

Re: well that worked like a charm :/
 

Snow did pass the time by typing:
> Why do I see the image of the "Tool Time" show, where Tim glues his head to
> the table coming along soon... Doug with his fingers glued to his wire
> wheel... :)

Well, I picked up some gorilla glue and cut some tin from a Guinness can
to act as backing/reinforcement. It's all glued up and curing. We will see
if it works.

If not, then it was fun.

--
DougW

Re: well that worked like a charm :/
 

Snow did pass the time by typing:
> Why do I see the image of the "Tool Time" show, where Tim glues his head to
> the table coming along soon... Doug with his fingers glued to his wire
> wheel... :)

Well, I picked up some gorilla glue and cut some tin from a Guinness can
to act as backing/reinforcement. It's all glued up and curing. We will see
if it works.

If not, then it was fun.

--
DougW

Re: well that worked like a charm :/
 

Snow did pass the time by typing:
> Why do I see the image of the "Tool Time" show, where Tim glues his head to
> the table coming along soon... Doug with his fingers glued to his wire
> wheel... :)

Well, I picked up some gorilla glue and cut some tin from a Guinness can
to act as backing/reinforcement. It's all glued up and curing. We will see
if it works.

If not, then it was fun.

--
DougW

Re: well that worked like a charm :/
 

DougW did pass the time by typing:
> Snow did pass the time by typing:
>> Why do I see the image of the "Tool Time" show, where Tim glues his head to
>> the table coming along soon... Doug with his fingers glued to his wire
>> wheel... :)
>
> Well, I picked up some gorilla glue and cut some tin from a Guinness can
> to act as backing/reinforcement. It's all glued up and curing. We will see
> if it works.
>
> If not, then it was fun.

All fixored!

http://www.revbeergoggles.com/temp/knobface.jpg
http://www.revbeergoggles.com/temp/knob--------
http://www.revbeergoggles.com/temp/knob-guinness.jpg

Glued a few other fiddly bits together and boy does that
stuff hold.

Think I'm gonna take it to work and glue a quarter to one
of the parking blocks. :) Purely for scientific research mind you.

--
DougW

Re: well that worked like a charm :/
 

DougW did pass the time by typing:
> Snow did pass the time by typing:
>> Why do I see the image of the "Tool Time" show, where Tim glues his head to
>> the table coming along soon... Doug with his fingers glued to his wire
>> wheel... :)
>
> Well, I picked up some gorilla glue and cut some tin from a Guinness can
> to act as backing/reinforcement. It's all glued up and curing. We will see
> if it works.
>
> If not, then it was fun.

All fixored!

http://www.revbeergoggles.com/temp/knobface.jpg
http://www.revbeergoggles.com/temp/knob--------
http://www.revbeergoggles.com/temp/knob-guinness.jpg

Glued a few other fiddly bits together and boy does that
stuff hold.

Think I'm gonna take it to work and glue a quarter to one
of the parking blocks. :) Purely for scientific research mind you.

--
DougW

Re: well that worked like a charm :/
 

DougW did pass the time by typing:
> Snow did pass the time by typing:
>> Why do I see the image of the "Tool Time" show, where Tim glues his head to
>> the table coming along soon... Doug with his fingers glued to his wire
>> wheel... :)
>
> Well, I picked up some gorilla glue and cut some tin from a Guinness can
> to act as backing/reinforcement. It's all glued up and curing. We will see
> if it works.
>
> If not, then it was fun.

All fixored!

http://www.revbeergoggles.com/temp/knobface.jpg
http://www.revbeergoggles.com/temp/knob--------
http://www.revbeergoggles.com/temp/knob-guinness.jpg

Glued a few other fiddly bits together and boy does that
stuff hold.

Think I'm gonna take it to work and glue a quarter to one
of the parking blocks. :) Purely for scientific research mind you.

--
DougW

Re: well that worked like a charm :/
 

Good deal, I thought that Gorilla Glue suggestion might have been the
one to do the trick. :)

DougW wrote:
> DougW did pass the time by typing:
>
>>Snow did pass the time by typing:
>>
>>>Why do I see the image of the "Tool Time" show, where Tim glues his head to
>>>the table coming along soon... Doug with his fingers glued to his wire
>>>wheel... :)
>>
>>Well, I picked up some gorilla glue and cut some tin from a Guinness can
>>to act as backing/reinforcement. It's all glued up and curing. We will see
>>if it works.
>>
>>If not, then it was fun.
>
>
> All fixored!
>
> http://www.revbeergoggles.com/temp/knobface.jpg
> http://www.revbeergoggles.com/temp/knob--------
> http://www.revbeergoggles.com/temp/knob-guinness.jpg
>
> Glued a few other fiddly bits together and boy does that
> stuff hold.
>
> Think I'm gonna take it to work and glue a quarter to one
> of the parking blocks. :) Purely for scientific research mind you.
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/

Re: well that worked like a charm :/
 

Good deal, I thought that Gorilla Glue suggestion might have been the
one to do the trick. :)

DougW wrote:
> DougW did pass the time by typing:
>
>>Snow did pass the time by typing:
>>
>>>Why do I see the image of the "Tool Time" show, where Tim glues his head to
>>>the table coming along soon... Doug with his fingers glued to his wire
>>>wheel... :)
>>
>>Well, I picked up some gorilla glue and cut some tin from a Guinness can
>>to act as backing/reinforcement. It's all glued up and curing. We will see
>>if it works.
>>
>>If not, then it was fun.
>
>
> All fixored!
>
> http://www.revbeergoggles.com/temp/knobface.jpg
> http://www.revbeergoggles.com/temp/knob--------
> http://www.revbeergoggles.com/temp/knob-guinness.jpg
>
> Glued a few other fiddly bits together and boy does that
> stuff hold.
>
> Think I'm gonna take it to work and glue a quarter to one
> of the parking blocks. :) Purely for scientific research mind you.
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/

Re: well that worked like a charm :/
 

Good deal, I thought that Gorilla Glue suggestion might have been the
one to do the trick. :)

DougW wrote:
> DougW did pass the time by typing:
>
>>Snow did pass the time by typing:
>>
>>>Why do I see the image of the "Tool Time" show, where Tim glues his head to
>>>the table coming along soon... Doug with his fingers glued to his wire
>>>wheel... :)
>>
>>Well, I picked up some gorilla glue and cut some tin from a Guinness can
>>to act as backing/reinforcement. It's all glued up and curing. We will see
>>if it works.
>>
>>If not, then it was fun.
>
>
> All fixored!
>
> http://www.revbeergoggles.com/temp/knobface.jpg
> http://www.revbeergoggles.com/temp/knob--------
> http://www.revbeergoggles.com/temp/knob-guinness.jpg
>
> Glued a few other fiddly bits together and boy does that
> stuff hold.
>
> Think I'm gonna take it to work and glue a quarter to one
> of the parking blocks. :) Purely for scientific research mind you.
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/

Re: well that worked like a charm :/
 

By Golly Doug! That's a mighty fine looking repair!

You will have to post your findings on that parking lot research.

Good job on the knob there mister.

KJK


"DougW" <post.replies@invalid.address> wrote in message
news:LqAtf.36056$---.22736@dukeread07...
: DougW did pass the time by typing:
: > Snow did pass the time by typing:
: >> Why do I see the image of the "Tool Time" show, where Tim glues his
head to
: >> the table coming along soon... Doug with his fingers glued to his wire
: >> wheel... :)
: >
: > Well, I picked up some gorilla glue and cut some tin from a Guinness can
: > to act as backing/reinforcement. It's all glued up and curing. We will
see
: > if it works.
: >
: > If not, then it was fun.
:
: All fixored!
:
: http://www.revbeergoggles.com/temp/knobface.jpg
: http://www.revbeergoggles.com/temp/knob--------
: http://www.revbeergoggles.com/temp/knob-guinness.jpg
:
: Glued a few other fiddly bits together and boy does that
: stuff hold.
:
: Think I'm gonna take it to work and glue a quarter to one
: of the parking blocks. :) Purely for scientific research mind you.
:
: --
: DougW
:
:

Re: well that worked like a charm :/
 

By Golly Doug! That's a mighty fine looking repair!

You will have to post your findings on that parking lot research.

Good job on the knob there mister.

KJK


"DougW" <post.replies@invalid.address> wrote in message
news:LqAtf.36056$---.22736@dukeread07...
: DougW did pass the time by typing:
: > Snow did pass the time by typing:
: >> Why do I see the image of the "Tool Time" show, where Tim glues his
head to
: >> the table coming along soon... Doug with his fingers glued to his wire
: >> wheel... :)
: >
: > Well, I picked up some gorilla glue and cut some tin from a Guinness can
: > to act as backing/reinforcement. It's all glued up and curing. We will
see
: > if it works.
: >
: > If not, then it was fun.
:
: All fixored!
:
: http://www.revbeergoggles.com/temp/knobface.jpg
: http://www.revbeergoggles.com/temp/knob--------
: http://www.revbeergoggles.com/temp/knob-guinness.jpg
:
: Glued a few other fiddly bits together and boy does that
: stuff hold.
:
: Think I'm gonna take it to work and glue a quarter to one
: of the parking blocks. :) Purely for scientific research mind you.
:
: --
: DougW
:
:

Re: well that worked like a charm :/
 

By Golly Doug! That's a mighty fine looking repair!

You will have to post your findings on that parking lot research.

Good job on the knob there mister.

KJK


"DougW" <post.replies@invalid.address> wrote in message
news:LqAtf.36056$---.22736@dukeread07...
: DougW did pass the time by typing:
: > Snow did pass the time by typing:
: >> Why do I see the image of the "Tool Time" show, where Tim glues his
head to
: >> the table coming along soon... Doug with his fingers glued to his wire
: >> wheel... :)
: >
: > Well, I picked up some gorilla glue and cut some tin from a Guinness can
: > to act as backing/reinforcement. It's all glued up and curing. We will
see
: > if it works.
: >
: > If not, then it was fun.
:
: All fixored!
:
: http://www.revbeergoggles.com/temp/knobface.jpg
: http://www.revbeergoggles.com/temp/knob--------
: http://www.revbeergoggles.com/temp/knob-guinness.jpg
:
: Glued a few other fiddly bits together and boy does that
: stuff hold.
:
: Think I'm gonna take it to work and glue a quarter to one
: of the parking blocks. :) Purely for scientific research mind you.
:
: --
: DougW
:
: