|
Transmission linkage
I having trouble getting off the linkage from the steering column to the
bellcrank. I have a 93 wrangler. I am trying to remove the down rod from the column that goes to the bell crank hold down bolt. The bolt is out but that is as far as it will go. Any ideas? |
Re: Transmission linkage
Are you talking a bolt on a slide thing that adjusts the linkage?
Maybe you have to put it in a gear like low first to get the rod down to get the clearance to pull it out if you leave the tranny in low with the bolt out and put the shifter back to park? Does that make any sense? Or maybe you have to pull the bell crank off the firewall and drop it down? Just guesses. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) Lovs2fly wrote: > > I having trouble getting off the linkage from the steering column to the > bellcrank. I have a 93 wrangler. I am trying to remove the down rod from the > column that goes to the bell crank hold down bolt. The bolt is out but that > is as far as it will go. Any ideas? |
Re: Transmission linkage
Are you talking a bolt on a slide thing that adjusts the linkage?
Maybe you have to put it in a gear like low first to get the rod down to get the clearance to pull it out if you leave the tranny in low with the bolt out and put the shifter back to park? Does that make any sense? Or maybe you have to pull the bell crank off the firewall and drop it down? Just guesses. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) Lovs2fly wrote: > > I having trouble getting off the linkage from the steering column to the > bellcrank. I have a 93 wrangler. I am trying to remove the down rod from the > column that goes to the bell crank hold down bolt. The bolt is out but that > is as far as it will go. Any ideas? |
Re: Transmission linkage
Are you talking a bolt on a slide thing that adjusts the linkage?
Maybe you have to put it in a gear like low first to get the rod down to get the clearance to pull it out if you leave the tranny in low with the bolt out and put the shifter back to park? Does that make any sense? Or maybe you have to pull the bell crank off the firewall and drop it down? Just guesses. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) Lovs2fly wrote: > > I having trouble getting off the linkage from the steering column to the > bellcrank. I have a 93 wrangler. I am trying to remove the down rod from the > column that goes to the bell crank hold down bolt. The bolt is out but that > is as far as it will go. Any ideas? |
Re: Transmission linkage
That's the one. Bolt's out but I can not drop the rod down. I am pulling the
column so this need to come out. "Mike Romain" <romainm@sympatico.ca> wrote in message news:43EA5E93.4F25A3@sympatico.ca... > Are you talking a bolt on a slide thing that adjusts the linkage? > > Maybe you have to put it in a gear like low first to get the rod down to > get the clearance to pull it out if you leave the tranny in low with the > bolt out and put the shifter back to park? Does that make any sense? > > Or maybe you have to pull the bell crank off the firewall and drop it > down? > > Just guesses. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > Canadian Off Road Trips Photos: Non members can still view! > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > (More Off Road album links at bottom of the view page) > > Lovs2fly wrote: >> >> I having trouble getting off the linkage from the steering column to the >> bellcrank. I have a 93 wrangler. I am trying to remove the down rod from >> the >> column that goes to the bell crank hold down bolt. The bolt is out but >> that >> is as far as it will go. Any ideas? |
Re: Transmission linkage
That's the one. Bolt's out but I can not drop the rod down. I am pulling the
column so this need to come out. "Mike Romain" <romainm@sympatico.ca> wrote in message news:43EA5E93.4F25A3@sympatico.ca... > Are you talking a bolt on a slide thing that adjusts the linkage? > > Maybe you have to put it in a gear like low first to get the rod down to > get the clearance to pull it out if you leave the tranny in low with the > bolt out and put the shifter back to park? Does that make any sense? > > Or maybe you have to pull the bell crank off the firewall and drop it > down? > > Just guesses. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > Canadian Off Road Trips Photos: Non members can still view! > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > (More Off Road album links at bottom of the view page) > > Lovs2fly wrote: >> >> I having trouble getting off the linkage from the steering column to the >> bellcrank. I have a 93 wrangler. I am trying to remove the down rod from >> the >> column that goes to the bell crank hold down bolt. The bolt is out but >> that >> is as far as it will go. Any ideas? |
Re: Transmission linkage
That's the one. Bolt's out but I can not drop the rod down. I am pulling the
column so this need to come out. "Mike Romain" <romainm@sympatico.ca> wrote in message news:43EA5E93.4F25A3@sympatico.ca... > Are you talking a bolt on a slide thing that adjusts the linkage? > > Maybe you have to put it in a gear like low first to get the rod down to > get the clearance to pull it out if you leave the tranny in low with the > bolt out and put the shifter back to park? Does that make any sense? > > Or maybe you have to pull the bell crank off the firewall and drop it > down? > > Just guesses. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > Canadian Off Road Trips Photos: Non members can still view! > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > (More Off Road album links at bottom of the view page) > > Lovs2fly wrote: >> >> I having trouble getting off the linkage from the steering column to the >> bellcrank. I have a 93 wrangler. I am trying to remove the down rod from >> the >> column that goes to the bell crank hold down bolt. The bolt is out but >> that >> is as far as it will go. Any ideas? |
Re: Transmission linkage
I would go under and hand shift the tranny to low with the bolt out.
That might do it. Mike Lovs2fly wrote: > > That's the one. Bolt's out but I can not drop the rod down. I am pulling the > column so this need to come out. > > "Mike Romain" <romainm@sympatico.ca> wrote in message > news:43EA5E93.4F25A3@sympatico.ca... > > Are you talking a bolt on a slide thing that adjusts the linkage? > > > > Maybe you have to put it in a gear like low first to get the rod down to > > get the clearance to pull it out if you leave the tranny in low with the > > bolt out and put the shifter back to park? Does that make any sense? > > > > Or maybe you have to pull the bell crank off the firewall and drop it > > down? > > > > Just guesses. > > > > Mike > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > > 88 Cherokee 235 BFG AT's > > Canadian Off Road Trips Photos: Non members can still view! > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > > (More Off Road album links at bottom of the view page) > > > > Lovs2fly wrote: > >> > >> I having trouble getting off the linkage from the steering column to the > >> bellcrank. I have a 93 wrangler. I am trying to remove the down rod from > >> the > >> column that goes to the bell crank hold down bolt. The bolt is out but > >> that > >> is as far as it will go. Any ideas? |
Re: Transmission linkage
I would go under and hand shift the tranny to low with the bolt out.
That might do it. Mike Lovs2fly wrote: > > That's the one. Bolt's out but I can not drop the rod down. I am pulling the > column so this need to come out. > > "Mike Romain" <romainm@sympatico.ca> wrote in message > news:43EA5E93.4F25A3@sympatico.ca... > > Are you talking a bolt on a slide thing that adjusts the linkage? > > > > Maybe you have to put it in a gear like low first to get the rod down to > > get the clearance to pull it out if you leave the tranny in low with the > > bolt out and put the shifter back to park? Does that make any sense? > > > > Or maybe you have to pull the bell crank off the firewall and drop it > > down? > > > > Just guesses. > > > > Mike > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > > 88 Cherokee 235 BFG AT's > > Canadian Off Road Trips Photos: Non members can still view! > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > > (More Off Road album links at bottom of the view page) > > > > Lovs2fly wrote: > >> > >> I having trouble getting off the linkage from the steering column to the > >> bellcrank. I have a 93 wrangler. I am trying to remove the down rod from > >> the > >> column that goes to the bell crank hold down bolt. The bolt is out but > >> that > >> is as far as it will go. Any ideas? |
Re: Transmission linkage
I would go under and hand shift the tranny to low with the bolt out.
That might do it. Mike Lovs2fly wrote: > > That's the one. Bolt's out but I can not drop the rod down. I am pulling the > column so this need to come out. > > "Mike Romain" <romainm@sympatico.ca> wrote in message > news:43EA5E93.4F25A3@sympatico.ca... > > Are you talking a bolt on a slide thing that adjusts the linkage? > > > > Maybe you have to put it in a gear like low first to get the rod down to > > get the clearance to pull it out if you leave the tranny in low with the > > bolt out and put the shifter back to park? Does that make any sense? > > > > Or maybe you have to pull the bell crank off the firewall and drop it > > down? > > > > Just guesses. > > > > Mike > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > > 88 Cherokee 235 BFG AT's > > Canadian Off Road Trips Photos: Non members can still view! > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > > (More Off Road album links at bottom of the view page) > > > > Lovs2fly wrote: > >> > >> I having trouble getting off the linkage from the steering column to the > >> bellcrank. I have a 93 wrangler. I am trying to remove the down rod from > >> the > >> column that goes to the bell crank hold down bolt. The bolt is out but > >> that > >> is as far as it will go. Any ideas? |
| All times are GMT -4. The time now is 12:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands