torx bit size...
'97 GC, I6. I need to replace the o-rings in my oil filter adapter. What
size is the torx bit needed to remove the bolt? A 55 feels a bit to small. thanks cal |
Re: torx bit size...
Cal wrote:
> '97 GC, I6. I need to replace the o-rings in my oil filter adapter. What size is the torx bit needed to remove the bolt? A 55 > feels a > bit to small. IIRC it fits a T60 -- DougW |
Re: torx bit size...
Cal wrote:
> '97 GC, I6. I need to replace the o-rings in my oil filter adapter. What size is the torx bit needed to remove the bolt? A 55 > feels a > bit to small. IIRC it fits a T60 -- DougW |
Re: torx bit size...
Cal wrote:
> '97 GC, I6. I need to replace the o-rings in my oil filter adapter. What size is the torx bit needed to remove the bolt? A 55 > feels a > bit to small. IIRC it fits a T60 -- DougW |
Re: torx bit size...
Thanks for your reply!
cal "DougW" <post.replies@invalid.address> wrote in message news:hGhlh.13430$9e.2671@newsfe20.lga... > Cal wrote: >> '97 GC, I6. I need to replace the o-rings in my oil filter adapter. What >> size is the torx bit needed to remove the bolt? A 55 feels a >> bit to small. > > IIRC it fits a T60 > > -- > DougW > |
Re: torx bit size...
Thanks for your reply!
cal "DougW" <post.replies@invalid.address> wrote in message news:hGhlh.13430$9e.2671@newsfe20.lga... > Cal wrote: >> '97 GC, I6. I need to replace the o-rings in my oil filter adapter. What >> size is the torx bit needed to remove the bolt? A 55 feels a >> bit to small. > > IIRC it fits a T60 > > -- > DougW > |
Re: torx bit size...
Thanks for your reply!
cal "DougW" <post.replies@invalid.address> wrote in message news:hGhlh.13430$9e.2671@newsfe20.lga... > Cal wrote: >> '97 GC, I6. I need to replace the o-rings in my oil filter adapter. What >> size is the torx bit needed to remove the bolt? A 55 feels a >> bit to small. > > IIRC it fits a T60 > > -- > DougW > |
Re: torx bit size...
Cal wrote:
> Thanks for your reply! > cal no problem. -- DougW |
Re: torx bit size...
Cal wrote:
> Thanks for your reply! > cal no problem. -- DougW |
Re: torx bit size...
Cal wrote:
> Thanks for your reply! > cal no problem. -- DougW |
All times are GMT -4. The time now is 08:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands