Torn gease boot
Guest
Posts: n/a
Torn gease boot
While working under my '01 TJ, I noticed that the dust boot is torn
where the drag-link attaches to the pitman arm. I figure that I should
replace this before too long. I didn't find anything on this in the
FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
of the pitman arm? Source of a new boot (dealership)?
Anyone been able to get into the Jeeps Unlimited site lately?
Art
where the drag-link attaches to the pitman arm. I figure that I should
replace this before too long. I didn't find anything on this in the
FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
of the pitman arm? Source of a new boot (dealership)?
Anyone been able to get into the Jeeps Unlimited site lately?
Art
Guest
Posts: n/a
Re: Torn gease boot
It shouldn't be too hard to pop the drag-link bolt out. Get the special
tool or hit the side of the pitman arm, where the drag link goes through it,
a few times. You can get a new boot by buying a new drag link or drag link
end. As for the boots, try looking for "Prothane Tie Rod Boots" in Yahoo!
Shopping or your favorite Internet shopping place. I don't know where you
can get OEM boots without buying the drag link itself.
Earle
"Art" <art@nospam.org> wrote in message
news:DPsBg.14771$gU4.11096@trnddc07...
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
tool or hit the side of the pitman arm, where the drag link goes through it,
a few times. You can get a new boot by buying a new drag link or drag link
end. As for the boots, try looking for "Prothane Tie Rod Boots" in Yahoo!
Shopping or your favorite Internet shopping place. I don't know where you
can get OEM boots without buying the drag link itself.
Earle
"Art" <art@nospam.org> wrote in message
news:DPsBg.14771$gU4.11096@trnddc07...
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
Guest
Posts: n/a
Re: Torn gease boot
It shouldn't be too hard to pop the drag-link bolt out. Get the special
tool or hit the side of the pitman arm, where the drag link goes through it,
a few times. You can get a new boot by buying a new drag link or drag link
end. As for the boots, try looking for "Prothane Tie Rod Boots" in Yahoo!
Shopping or your favorite Internet shopping place. I don't know where you
can get OEM boots without buying the drag link itself.
Earle
"Art" <art@nospam.org> wrote in message
news:DPsBg.14771$gU4.11096@trnddc07...
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
tool or hit the side of the pitman arm, where the drag link goes through it,
a few times. You can get a new boot by buying a new drag link or drag link
end. As for the boots, try looking for "Prothane Tie Rod Boots" in Yahoo!
Shopping or your favorite Internet shopping place. I don't know where you
can get OEM boots without buying the drag link itself.
Earle
"Art" <art@nospam.org> wrote in message
news:DPsBg.14771$gU4.11096@trnddc07...
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
Guest
Posts: n/a
Re: Torn gease boot
It shouldn't be too hard to pop the drag-link bolt out. Get the special
tool or hit the side of the pitman arm, where the drag link goes through it,
a few times. You can get a new boot by buying a new drag link or drag link
end. As for the boots, try looking for "Prothane Tie Rod Boots" in Yahoo!
Shopping or your favorite Internet shopping place. I don't know where you
can get OEM boots without buying the drag link itself.
Earle
"Art" <art@nospam.org> wrote in message
news:DPsBg.14771$gU4.11096@trnddc07...
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
tool or hit the side of the pitman arm, where the drag link goes through it,
a few times. You can get a new boot by buying a new drag link or drag link
end. As for the boots, try looking for "Prothane Tie Rod Boots" in Yahoo!
Shopping or your favorite Internet shopping place. I don't know where you
can get OEM boots without buying the drag link itself.
Earle
"Art" <art@nospam.org> wrote in message
news:DPsBg.14771$gU4.11096@trnddc07...
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
Guest
Posts: n/a
Re: Torn gease boot
It shouldn't be too hard to pop the drag-link bolt out. Get the special
tool or hit the side of the pitman arm, where the drag link goes through it,
a few times. You can get a new boot by buying a new drag link or drag link
end. As for the boots, try looking for "Prothane Tie Rod Boots" in Yahoo!
Shopping or your favorite Internet shopping place. I don't know where you
can get OEM boots without buying the drag link itself.
Earle
"Art" <art@nospam.org> wrote in message
news:DPsBg.14771$gU4.11096@trnddc07...
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
tool or hit the side of the pitman arm, where the drag link goes through it,
a few times. You can get a new boot by buying a new drag link or drag link
end. As for the boots, try looking for "Prothane Tie Rod Boots" in Yahoo!
Shopping or your favorite Internet shopping place. I don't know where you
can get OEM boots without buying the drag link itself.
Earle
"Art" <art@nospam.org> wrote in message
news:DPsBg.14771$gU4.11096@trnddc07...
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
Guest
Posts: n/a
Re: Torn gease boot
Autozone sells polyurathane boots. I bought them for a 95 YJ but they
are probably the same size.
Art wrote:
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
are probably the same size.
Art wrote:
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
Guest
Posts: n/a
Re: Torn gease boot
Autozone sells polyurathane boots. I bought them for a 95 YJ but they
are probably the same size.
Art wrote:
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
are probably the same size.
Art wrote:
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
Guest
Posts: n/a
Re: Torn gease boot
Autozone sells polyurathane boots. I bought them for a 95 YJ but they
are probably the same size.
Art wrote:
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
are probably the same size.
Art wrote:
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
Guest
Posts: n/a
Re: Torn gease boot
Autozone sells polyurathane boots. I bought them for a 95 YJ but they
are probably the same size.
Art wrote:
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
are probably the same size.
Art wrote:
> While working under my '01 TJ, I noticed that the dust boot is torn
> where the drag-link attaches to the pitman arm. I figure that I should
> replace this before too long. I didn't find anything on this in the
> FSM. Anyone replaced one? How hard is it to pop the drag-link bolt out
> of the pitman arm? Source of a new boot (dealership)?
>
> Anyone been able to get into the Jeeps Unlimited site lately?
>
> Art
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)