Torched my Flairs
 

Well after reading some of the posts about ugly flairs,
i took another look at my original ones,on my 90YJ,
Yup, there ugly and the drivers front had a nice crease in the corner,
and as there leaving the jeep in a few months(getting wider ones)
i figured what the ell,
got my plumbing torch out,
and went over the fenders slowly with the heat from the torch turned up
all the way so there was a wide flame,
went a little quicker near the paint,,,grin,
there now nice and shinny new cept one spot where my attenion got
deverted,,little bubbles,,,grrrrr,,,
i also got the creece(spellin) out of the front fender by heating it up
and pushing it out from the underside,

NOT that id sugest this to anyone, specialy the drivers rear
as in GAS-TANK,,,,Fumes,,,,
,
johnp

Re: Torched my Flairs
 

We're please to see that after nearly 30 years of complaints from owners
Jeep has finally fixed the fading flares issue: They now make them Gray
instead of Black!

<scopenutt@yahoo.com> wrote in message
news:1103555085.675457.59180@z14g2000cwz.googlegro ups.com...
> Well after reading some of the posts about ugly flairs,
> i took another look at my original ones,on my 90YJ,
> Yup, there ugly and the drivers front had a nice crease in the corner,
> and as there leaving the jeep in a few months(getting wider ones)
> i figured what the ell,
> got my plumbing torch out,
> and went over the fenders slowly with the heat from the torch turned up
> all the way so there was a wide flame,
> went a little quicker near the paint,,,grin,
> there now nice and shinny new cept one spot where my attenion got
> deverted,,little bubbles,,,grrrrr,,,
> i also got the creece(spellin) out of the front fender by heating it up
> and pushing it out from the underside,
>
> NOT that id sugest this to anyone, specialy the drivers rear
> as in GAS-TANK,,,,Fumes,,,,
> ,
> johnp
>

Re: Torched my Flairs
 

We're please to see that after nearly 30 years of complaints from owners
Jeep has finally fixed the fading flares issue: They now make them Gray
instead of Black!

<scopenutt@yahoo.com> wrote in message
news:1103555085.675457.59180@z14g2000cwz.googlegro ups.com...
> Well after reading some of the posts about ugly flairs,
> i took another look at my original ones,on my 90YJ,
> Yup, there ugly and the drivers front had a nice crease in the corner,
> and as there leaving the jeep in a few months(getting wider ones)
> i figured what the ell,
> got my plumbing torch out,
> and went over the fenders slowly with the heat from the torch turned up
> all the way so there was a wide flame,
> went a little quicker near the paint,,,grin,
> there now nice and shinny new cept one spot where my attenion got
> deverted,,little bubbles,,,grrrrr,,,
> i also got the creece(spellin) out of the front fender by heating it up
> and pushing it out from the underside,
>
> NOT that id sugest this to anyone, specialy the drivers rear
> as in GAS-TANK,,,,Fumes,,,,
> ,
> johnp
>

Re: Torched my Flairs
 

We're please to see that after nearly 30 years of complaints from owners
Jeep has finally fixed the fading flares issue: They now make them Gray
instead of Black!

<scopenutt@yahoo.com> wrote in message
news:1103555085.675457.59180@z14g2000cwz.googlegro ups.com...
> Well after reading some of the posts about ugly flairs,
> i took another look at my original ones,on my 90YJ,
> Yup, there ugly and the drivers front had a nice crease in the corner,
> and as there leaving the jeep in a few months(getting wider ones)
> i figured what the ell,
> got my plumbing torch out,
> and went over the fenders slowly with the heat from the torch turned up
> all the way so there was a wide flame,
> went a little quicker near the paint,,,grin,
> there now nice and shinny new cept one spot where my attenion got
> deverted,,little bubbles,,,grrrrr,,,
> i also got the creece(spellin) out of the front fender by heating it up
> and pushing it out from the underside,
>
> NOT that id sugest this to anyone, specialy the drivers rear
> as in GAS-TANK,,,,Fumes,,,,
> ,
> johnp
>

Re: Torched my Flairs
 

Oh like jeans......prefaded stone washed?

SoK66 wrote:
> We're please to see that after nearly 30 years of complaints from owners
> Jeep has finally fixed the fading flares issue: They now make them Gray
> instead of Black!
>
> <scopenutt@yahoo.com> wrote in message
> news:1103555085.675457.59180@z14g2000cwz.googlegro ups.com...
>
>>Well after reading some of the posts about ugly flairs,
>>i took another look at my original ones,on my 90YJ,
>>Yup, there ugly and the drivers front had a nice crease in the corner,
>>and as there leaving the jeep in a few months(getting wider ones)
>>i figured what the ell,
>>got my plumbing torch out,
>>and went over the fenders slowly with the heat from the torch turned up
>>all the way so there was a wide flame,
>>went a little quicker near the paint,,,grin,
>>there now nice and shinny new cept one spot where my attenion got
>>deverted,,little bubbles,,,grrrrr,,,
>>i also got the creece(spellin) out of the front fender by heating it up
>>and pushing it out from the underside,
>>
>>NOT that id sugest this to anyone, specialy the drivers rear
>>as in GAS-TANK,,,,Fumes,,,,
>>,
>>johnp
>>
>
>
>

Re: Torched my Flairs
 

Oh like jeans......prefaded stone washed?

SoK66 wrote:
> We're please to see that after nearly 30 years of complaints from owners
> Jeep has finally fixed the fading flares issue: They now make them Gray
> instead of Black!
>
> <scopenutt@yahoo.com> wrote in message
> news:1103555085.675457.59180@z14g2000cwz.googlegro ups.com...
>
>>Well after reading some of the posts about ugly flairs,
>>i took another look at my original ones,on my 90YJ,
>>Yup, there ugly and the drivers front had a nice crease in the corner,
>>and as there leaving the jeep in a few months(getting wider ones)
>>i figured what the ell,
>>got my plumbing torch out,
>>and went over the fenders slowly with the heat from the torch turned up
>>all the way so there was a wide flame,
>>went a little quicker near the paint,,,grin,
>>there now nice and shinny new cept one spot where my attenion got
>>deverted,,little bubbles,,,grrrrr,,,
>>i also got the creece(spellin) out of the front fender by heating it up
>>and pushing it out from the underside,
>>
>>NOT that id sugest this to anyone, specialy the drivers rear
>>as in GAS-TANK,,,,Fumes,,,,
>>,
>>johnp
>>
>
>
>

Re: Torched my Flairs
 

Oh like jeans......prefaded stone washed?

SoK66 wrote:
> We're please to see that after nearly 30 years of complaints from owners
> Jeep has finally fixed the fading flares issue: They now make them Gray
> instead of Black!
>
> <scopenutt@yahoo.com> wrote in message
> news:1103555085.675457.59180@z14g2000cwz.googlegro ups.com...
>
>>Well after reading some of the posts about ugly flairs,
>>i took another look at my original ones,on my 90YJ,
>>Yup, there ugly and the drivers front had a nice crease in the corner,
>>and as there leaving the jeep in a few months(getting wider ones)
>>i figured what the ell,
>>got my plumbing torch out,
>>and went over the fenders slowly with the heat from the torch turned up
>>all the way so there was a wide flame,
>>went a little quicker near the paint,,,grin,
>>there now nice and shinny new cept one spot where my attenion got
>>deverted,,little bubbles,,,grrrrr,,,
>>i also got the creece(spellin) out of the front fender by heating it up
>>and pushing it out from the underside,
>>
>>NOT that id sugest this to anyone, specialy the drivers rear
>>as in GAS-TANK,,,,Fumes,,,,
>>,
>>johnp
>>
>
>
>

Re: Torched my Flairs
 

SoK66 wrote:
> We're please to see that after nearly 30 years of complaints from owners
> Jeep has finally fixed the fading flares issue: They now make them Gray
> instead of Black!

Jeep recently went back to black after many complaints about the gray...
though who knows if the "new" black is more fade resistant than the old
black. :)

Jerry
>
> <scopenutt@yahoo.com> wrote in message
> news:1103555085.675457.59180@z14g2000cwz.googlegro ups.com...
>
>>Well after reading some of the posts about ugly flairs,
>>i took another look at my original ones,on my 90YJ,
>>Yup, there ugly and the drivers front had a nice crease in the corner,
>>and as there leaving the jeep in a few months(getting wider ones)
>>i figured what the ell,
>>got my plumbing torch out,
>>and went over the fenders slowly with the heat from the torch turned up
>>all the way so there was a wide flame,
>>went a little quicker near the paint,,,grin,
>>there now nice and shinny new cept one spot where my attenion got
>>deverted,,little bubbles,,,grrrrr,,,
>>i also got the creece(spellin) out of the front fender by heating it up
>>and pushing it out from the underside,
>>
>>NOT that id sugest this to anyone, specialy the drivers rear
>>as in GAS-TANK,,,,Fumes,,,,
>>,
>>johnp
>>
>
>
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/

Re: Torched my Flairs
 

SoK66 wrote:
> We're please to see that after nearly 30 years of complaints from owners
> Jeep has finally fixed the fading flares issue: They now make them Gray
> instead of Black!

Jeep recently went back to black after many complaints about the gray...
though who knows if the "new" black is more fade resistant than the old
black. :)

Jerry
>
> <scopenutt@yahoo.com> wrote in message
> news:1103555085.675457.59180@z14g2000cwz.googlegro ups.com...
>
>>Well after reading some of the posts about ugly flairs,
>>i took another look at my original ones,on my 90YJ,
>>Yup, there ugly and the drivers front had a nice crease in the corner,
>>and as there leaving the jeep in a few months(getting wider ones)
>>i figured what the ell,
>>got my plumbing torch out,
>>and went over the fenders slowly with the heat from the torch turned up
>>all the way so there was a wide flame,
>>went a little quicker near the paint,,,grin,
>>there now nice and shinny new cept one spot where my attenion got
>>deverted,,little bubbles,,,grrrrr,,,
>>i also got the creece(spellin) out of the front fender by heating it up
>>and pushing it out from the underside,
>>
>>NOT that id sugest this to anyone, specialy the drivers rear
>>as in GAS-TANK,,,,Fumes,,,,
>>,
>>johnp
>>
>
>
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/

Re: Torched my Flairs
 

SoK66 wrote:
> We're please to see that after nearly 30 years of complaints from owners
> Jeep has finally fixed the fading flares issue: They now make them Gray
> instead of Black!

Jeep recently went back to black after many complaints about the gray...
though who knows if the "new" black is more fade resistant than the old
black. :)

Jerry
>
> <scopenutt@yahoo.com> wrote in message
> news:1103555085.675457.59180@z14g2000cwz.googlegro ups.com...
>
>>Well after reading some of the posts about ugly flairs,
>>i took another look at my original ones,on my 90YJ,
>>Yup, there ugly and the drivers front had a nice crease in the corner,
>>and as there leaving the jeep in a few months(getting wider ones)
>>i figured what the ell,
>>got my plumbing torch out,
>>and went over the fenders slowly with the heat from the torch turned up
>>all the way so there was a wide flame,
>>went a little quicker near the paint,,,grin,
>>there now nice and shinny new cept one spot where my attenion got
>>deverted,,little bubbles,,,grrrrr,,,
>>i also got the creece(spellin) out of the front fender by heating it up
>>and pushing it out from the underside,
>>
>>NOT that id sugest this to anyone, specialy the drivers rear
>>as in GAS-TANK,,,,Fumes,,,,
>>,
>>johnp
>>
>
>
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/