|
TJ Steering Stabilizer Replacement
I'm in the process of replacing the OEM steering damper on my '98 TJ
with a Skyjacker OEM steering stabilizer. It's been a challenge, but I got the bolt/nut off the end of the OEM stabilizer nearest the wheel. It took a propane torch to heat up the nut on the tie rod end to get it off. Problem now is I can't get the bolt end of the old damper out of the tie rod. I've hammered on it. Used WD-40, Liquid Wrench, and the torch and it doesn't budge. This isn't threaded is it? It should just pop out, right? Thanks. Mark '98 TJ '98 XJ |
Re: TJ Steering Stabilizer Replacement
That bolt isn't meant to come out of the old stabilizer and if you even got
it out, it wouldn't fit properly in the new stabilizer. You need a new tapered bolt and Skyjacker sells only a "generic" kit that doesn't include it. Rancho is one company that does make a kit specifically made for the TJ. Since it was late at night when I discovered that with my Black Diamond stabilizer, I ended up finding the right size nut and bolt in my garage. Jerry -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ "M. E. Bye" <fxdyna@hotmail.com> wrote in message news:r8ubl0dg8vhnvl3v096p9k48f3o2ppck19@4ax.com... > I'm in the process of replacing the OEM steering damper on my '98 TJ > with a Skyjacker OEM steering stabilizer. It's been a challenge, but > I got the bolt/nut off the end of the OEM stabilizer nearest the > wheel. It took a propane torch to heat up the nut on the tie rod end > to get it off. Problem now is I can't get the bolt end of the old > damper out of the tie rod. I've hammered on it. Used WD-40, Liquid > Wrench, and the torch and it doesn't budge. This isn't threaded is > it? It should just pop out, right? > > Thanks. > > Mark > '98 TJ > '98 XJ |
Re: TJ Steering Stabilizer Replacement
That bolt isn't meant to come out of the old stabilizer and if you even got
it out, it wouldn't fit properly in the new stabilizer. You need a new tapered bolt and Skyjacker sells only a "generic" kit that doesn't include it. Rancho is one company that does make a kit specifically made for the TJ. Since it was late at night when I discovered that with my Black Diamond stabilizer, I ended up finding the right size nut and bolt in my garage. Jerry -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ "M. E. Bye" <fxdyna@hotmail.com> wrote in message news:r8ubl0dg8vhnvl3v096p9k48f3o2ppck19@4ax.com... > I'm in the process of replacing the OEM steering damper on my '98 TJ > with a Skyjacker OEM steering stabilizer. It's been a challenge, but > I got the bolt/nut off the end of the OEM stabilizer nearest the > wheel. It took a propane torch to heat up the nut on the tie rod end > to get it off. Problem now is I can't get the bolt end of the old > damper out of the tie rod. I've hammered on it. Used WD-40, Liquid > Wrench, and the torch and it doesn't budge. This isn't threaded is > it? It should just pop out, right? > > Thanks. > > Mark > '98 TJ > '98 XJ |
Re: TJ Steering Stabilizer Replacement
That bolt isn't meant to come out of the old stabilizer and if you even got
it out, it wouldn't fit properly in the new stabilizer. You need a new tapered bolt and Skyjacker sells only a "generic" kit that doesn't include it. Rancho is one company that does make a kit specifically made for the TJ. Since it was late at night when I discovered that with my Black Diamond stabilizer, I ended up finding the right size nut and bolt in my garage. Jerry -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ "M. E. Bye" <fxdyna@hotmail.com> wrote in message news:r8ubl0dg8vhnvl3v096p9k48f3o2ppck19@4ax.com... > I'm in the process of replacing the OEM steering damper on my '98 TJ > with a Skyjacker OEM steering stabilizer. It's been a challenge, but > I got the bolt/nut off the end of the OEM stabilizer nearest the > wheel. It took a propane torch to heat up the nut on the tie rod end > to get it off. Problem now is I can't get the bolt end of the old > damper out of the tie rod. I've hammered on it. Used WD-40, Liquid > Wrench, and the torch and it doesn't budge. This isn't threaded is > it? It should just pop out, right? > > Thanks. > > Mark > '98 TJ > '98 XJ |
Re: TJ Steering Stabilizer Replacement
On Sat, 25 Sep 2004 16:25:21 -0700, "Jerry Bransford"
<jerrypb@cox.net> wrote: >That bolt isn't meant to come out of the old stabilizer and if you even got >it out, it wouldn't fit properly in the new stabilizer. You need a new >tapered bolt and Skyjacker sells only a "generic" kit that doesn't include >it. Rancho is one company that does make a kit specifically made for the >TJ. Since it was late at night when I discovered that with my Black Diamond >stabilizer, I ended up finding the right size nut and bolt in my garage. > >Jerry Jerry... I'm trying to get the OEM bolt loose from the tie rod (not trying to get it out of the old stabilizer). My Skyjacker kit did, in fact, come with a tapered bolt. Skyjacker #7009 is an OEM replacement kit specifically for the TJ. Thanks. Mark |
Re: TJ Steering Stabilizer Replacement
On Sat, 25 Sep 2004 16:25:21 -0700, "Jerry Bransford"
<jerrypb@cox.net> wrote: >That bolt isn't meant to come out of the old stabilizer and if you even got >it out, it wouldn't fit properly in the new stabilizer. You need a new >tapered bolt and Skyjacker sells only a "generic" kit that doesn't include >it. Rancho is one company that does make a kit specifically made for the >TJ. Since it was late at night when I discovered that with my Black Diamond >stabilizer, I ended up finding the right size nut and bolt in my garage. > >Jerry Jerry... I'm trying to get the OEM bolt loose from the tie rod (not trying to get it out of the old stabilizer). My Skyjacker kit did, in fact, come with a tapered bolt. Skyjacker #7009 is an OEM replacement kit specifically for the TJ. Thanks. Mark |
Re: TJ Steering Stabilizer Replacement
On Sat, 25 Sep 2004 16:25:21 -0700, "Jerry Bransford"
<jerrypb@cox.net> wrote: >That bolt isn't meant to come out of the old stabilizer and if you even got >it out, it wouldn't fit properly in the new stabilizer. You need a new >tapered bolt and Skyjacker sells only a "generic" kit that doesn't include >it. Rancho is one company that does make a kit specifically made for the >TJ. Since it was late at night when I discovered that with my Black Diamond >stabilizer, I ended up finding the right size nut and bolt in my garage. > >Jerry Jerry... I'm trying to get the OEM bolt loose from the tie rod (not trying to get it out of the old stabilizer). My Skyjacker kit did, in fact, come with a tapered bolt. Skyjacker #7009 is an OEM replacement kit specifically for the TJ. Thanks. Mark |
Re: TJ Steering Stabilizer Replacement
Oh, gotcha. I had the same problem getting mine out too. I ended up taking
it over to the dealer where a friend worked who got it out for me. I thought he'd use some great kind of puller like a Pitman arm puller but he just used a bigger BFH than I did. I few full-swing whacks with his "bigger BFH" did the trick. When that bolt finally came loose, it ricocheted off two of the shop's steel walls, leaving a big dented gouge in one of them! :eek: Jerry -- -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ "M. E. Bye" <fxdyna@hotmail.com> wrote in message news:oodcl093qu1kqvktllp20rq96lh6rh9sui@4ax.com... > On Sat, 25 Sep 2004 16:25:21 -0700, "Jerry Bransford" > <jerrypb@cox.net> wrote: > >>That bolt isn't meant to come out of the old stabilizer and if you even >>got >>it out, it wouldn't fit properly in the new stabilizer. You need a new >>tapered bolt and Skyjacker sells only a "generic" kit that doesn't include >>it. Rancho is one company that does make a kit specifically made for the >>TJ. Since it was late at night when I discovered that with my Black >>Diamond >>stabilizer, I ended up finding the right size nut and bolt in my garage. >> >>Jerry > > Jerry... > I'm trying to get the OEM bolt loose from the tie rod (not trying to > get it out of the old stabilizer). My Skyjacker kit did, in fact, > come with a tapered bolt. Skyjacker #7009 is an OEM replacement kit > specifically for the TJ. > Thanks. > > Mark > |
Re: TJ Steering Stabilizer Replacement
Oh, gotcha. I had the same problem getting mine out too. I ended up taking
it over to the dealer where a friend worked who got it out for me. I thought he'd use some great kind of puller like a Pitman arm puller but he just used a bigger BFH than I did. I few full-swing whacks with his "bigger BFH" did the trick. When that bolt finally came loose, it ricocheted off two of the shop's steel walls, leaving a big dented gouge in one of them! :eek: Jerry -- -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ "M. E. Bye" <fxdyna@hotmail.com> wrote in message news:oodcl093qu1kqvktllp20rq96lh6rh9sui@4ax.com... > On Sat, 25 Sep 2004 16:25:21 -0700, "Jerry Bransford" > <jerrypb@cox.net> wrote: > >>That bolt isn't meant to come out of the old stabilizer and if you even >>got >>it out, it wouldn't fit properly in the new stabilizer. You need a new >>tapered bolt and Skyjacker sells only a "generic" kit that doesn't include >>it. Rancho is one company that does make a kit specifically made for the >>TJ. Since it was late at night when I discovered that with my Black >>Diamond >>stabilizer, I ended up finding the right size nut and bolt in my garage. >> >>Jerry > > Jerry... > I'm trying to get the OEM bolt loose from the tie rod (not trying to > get it out of the old stabilizer). My Skyjacker kit did, in fact, > come with a tapered bolt. Skyjacker #7009 is an OEM replacement kit > specifically for the TJ. > Thanks. > > Mark > |
Re: TJ Steering Stabilizer Replacement
Oh, gotcha. I had the same problem getting mine out too. I ended up taking
it over to the dealer where a friend worked who got it out for me. I thought he'd use some great kind of puller like a Pitman arm puller but he just used a bigger BFH than I did. I few full-swing whacks with his "bigger BFH" did the trick. When that bolt finally came loose, it ricocheted off two of the shop's steel walls, leaving a big dented gouge in one of them! :eek: Jerry -- -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ "M. E. Bye" <fxdyna@hotmail.com> wrote in message news:oodcl093qu1kqvktllp20rq96lh6rh9sui@4ax.com... > On Sat, 25 Sep 2004 16:25:21 -0700, "Jerry Bransford" > <jerrypb@cox.net> wrote: > >>That bolt isn't meant to come out of the old stabilizer and if you even >>got >>it out, it wouldn't fit properly in the new stabilizer. You need a new >>tapered bolt and Skyjacker sells only a "generic" kit that doesn't include >>it. Rancho is one company that does make a kit specifically made for the >>TJ. Since it was late at night when I discovered that with my Black >>Diamond >>stabilizer, I ended up finding the right size nut and bolt in my garage. >> >>Jerry > > Jerry... > I'm trying to get the OEM bolt loose from the tie rod (not trying to > get it out of the old stabilizer). My Skyjacker kit did, in fact, > come with a tapered bolt. Skyjacker #7009 is an OEM replacement kit > specifically for the TJ. > Thanks. > > Mark > |
| All times are GMT -4. The time now is 07:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands