Re: PJ Speedos color co-ordination issue; what to do?
This from the biggest loser of them all! The jealous, really jealous, I
can't believe how jealous this little draft dodging coward schizophrenic psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net 24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make a fool of its self. With an obsession with perverts and goats, where it writes via remailers, @news.alt.net, and cross posts to other perverts to no one's surprise. With extreme jealous ranting over my documents, possessions, successes, manliness and fine, Southern California surfing body, beard, and loving Christian family. Committing forgery over many of my posts, proving I'm a responsible American man. You remind me of a little rat dog, like a Mexican Chiwawa with its senseless barking, me too, me too. You're even more senile than I first thought. And the poor thing, you're too girlie to take responsibility for yourself again, by signing your statement like a man. That really thinks the group's members are so stupid not to know it's the same coward, posting over and over again using a schizophrenic psychopath forged up names? You're not worth any more time when a cut and paste this same paragraphs it fits so well! But, now worth a forwarding to: internet.help@shaw.ca, security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@aioe.org, admin@cox.net for forgery. Who said it also likes baby monkeys sucking their -----, like his buddy posted on an auto picture group at: news:0u7g43dkje4pdkqi07hl66s8kpifo564k1@4ax.com I thought this traitor's attacks were just over personal disagreements, but in reality these attacks stemming from my love of God and America on Independents Week, I realized you are actually attacking my country, and that's what you've been doing all along is declaring your hatred for the United States of America, with each declaration of my signature, but just too cowardly and stupid to be a ---------. It's America, love it, or leave it, so keep the f*ck out! Or let me know when you cross my American border, so I may arrest you! YOU ARE A TRAITOR and lost all rights to my American border, and someday I'll have you in jail where you belong! Any time, I'll fly and meant with other patriots guarding our borders against vermin like you. God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "Pink Freud" <psychokiller@terminal-analysis.org> wrote in message news:_H5ui.41576$rX4.31360@pd7urf2no... > > > You always react to the word 'Speedo', doncha? > -- Posted via a free Usenet account from http://www.teranews.com |
Re: Re: TJ Speedo gear issue
On Tue, 7 Aug 2007 13:44:09 -0700, "L.W. \(Bill\) ------ III"
<LWBill------@------.net> wrote: > The four banger would have had four to one axle gears. Your 33 tooth >gear would be correct if you had 3.73 ratio, so you've got something higher. >Check the numbers that are on a tab bolted between the two bolt holding on >the rear differential cover. Or on your build sheet probably still stuck in >your front seat springs. So try a 27 tooth: You are not looking at this properly (as you tend to do anyway). Speedo gears have a range of combos they can use and usually the have two differen drive gears (worm gear on output shaft) and several different driven gear on speedo cable. The PROPER way to fix this is to change the drive gear on output shaft with the one from toasted case. The reason for this is because some jeeps could ship with 3.07 axle ratio (which is a bad cruel joke anyway) and two different drive gear sizes and drive gear combos are need to deal with a 3.07 and a 4.10 properly ----------------- TheSnoMan.com |
Re: Re: TJ Speedo gear issue
On Tue, 7 Aug 2007 13:44:09 -0700, "L.W. \(Bill\) ------ III"
<LWBill------@------.net> wrote: > The four banger would have had four to one axle gears. Your 33 tooth >gear would be correct if you had 3.73 ratio, so you've got something higher. >Check the numbers that are on a tab bolted between the two bolt holding on >the rear differential cover. Or on your build sheet probably still stuck in >your front seat springs. So try a 27 tooth: You are not looking at this properly (as you tend to do anyway). Speedo gears have a range of combos they can use and usually the have two differen drive gears (worm gear on output shaft) and several different driven gear on speedo cable. The PROPER way to fix this is to change the drive gear on output shaft with the one from toasted case. The reason for this is because some jeeps could ship with 3.07 axle ratio (which is a bad cruel joke anyway) and two different drive gear sizes and drive gear combos are need to deal with a 3.07 and a 4.10 properly ----------------- TheSnoMan.com |
Re: Re: TJ Speedo gear issue
On Tue, 7 Aug 2007 13:44:09 -0700, "L.W. \(Bill\) ------ III"
<LWBill------@------.net> wrote: > The four banger would have had four to one axle gears. Your 33 tooth >gear would be correct if you had 3.73 ratio, so you've got something higher. >Check the numbers that are on a tab bolted between the two bolt holding on >the rear differential cover. Or on your build sheet probably still stuck in >your front seat springs. So try a 27 tooth: You are not looking at this properly (as you tend to do anyway). Speedo gears have a range of combos they can use and usually the have two differen drive gears (worm gear on output shaft) and several different driven gear on speedo cable. The PROPER way to fix this is to change the drive gear on output shaft with the one from toasted case. The reason for this is because some jeeps could ship with 3.07 axle ratio (which is a bad cruel joke anyway) and two different drive gear sizes and drive gear combos are need to deal with a 3.07 and a 4.10 properly ----------------- TheSnoMan.com |
Re: Re: TJ Speedo gear issue
On Tue, 7 Aug 2007 13:44:09 -0700, "L.W. \(Bill\) ------ III"
<LWBill------@------.net> wrote: > The four banger would have had four to one axle gears. Your 33 tooth >gear would be correct if you had 3.73 ratio, so you've got something higher. >Check the numbers that are on a tab bolted between the two bolt holding on >the rear differential cover. Or on your build sheet probably still stuck in >your front seat springs. So try a 27 tooth: You are not looking at this properly (as you tend to do anyway). Speedo gears have a range of combos they can use and usually the have two differen drive gears (worm gear on output shaft) and several different driven gear on speedo cable. The PROPER way to fix this is to change the drive gear on output shaft with the one from toasted case. The reason for this is because some jeeps could ship with 3.07 axle ratio (which is a bad cruel joke anyway) and two different drive gear sizes and drive gear combos are need to deal with a 3.07 and a 4.10 properly ----------------- TheSnoMan.com |
Re: Re: TJ Speedo gear issue
http://go.jeep-xj.info/HowtoSpeedoGears.htm
God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "SnoMan" <admin@snoman.com> wrote in message news:uv2ib317vahcve6kcqmsldr7guc4uq2t0l@4ax.com... > > You are not looking at this properly (as you tend to do anyway). > Speedo gears have a range of combos they can use and usually the have > two differen drive gears (worm gear on output shaft) and several > different driven gear on speedo cable. The PROPER way to fix this is > to change the drive gear on output shaft with the one from toasted > case. The reason for this is because some jeeps could ship with 3.07 > axle ratio (which is a bad cruel joke anyway) and two different drive > gear sizes and drive gear combos are need to deal with a 3.07 and a > 4.10 properly > ----------------- > TheSnoMan.com -- Posted via a free Usenet account from http://www.teranews.com |
Re: Re: TJ Speedo gear issue
http://go.jeep-xj.info/HowtoSpeedoGears.htm
God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "SnoMan" <admin@snoman.com> wrote in message news:uv2ib317vahcve6kcqmsldr7guc4uq2t0l@4ax.com... > > You are not looking at this properly (as you tend to do anyway). > Speedo gears have a range of combos they can use and usually the have > two differen drive gears (worm gear on output shaft) and several > different driven gear on speedo cable. The PROPER way to fix this is > to change the drive gear on output shaft with the one from toasted > case. The reason for this is because some jeeps could ship with 3.07 > axle ratio (which is a bad cruel joke anyway) and two different drive > gear sizes and drive gear combos are need to deal with a 3.07 and a > 4.10 properly > ----------------- > TheSnoMan.com -- Posted via a free Usenet account from http://www.teranews.com |
Re: Re: TJ Speedo gear issue
http://go.jeep-xj.info/HowtoSpeedoGears.htm
God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "SnoMan" <admin@snoman.com> wrote in message news:uv2ib317vahcve6kcqmsldr7guc4uq2t0l@4ax.com... > > You are not looking at this properly (as you tend to do anyway). > Speedo gears have a range of combos they can use and usually the have > two differen drive gears (worm gear on output shaft) and several > different driven gear on speedo cable. The PROPER way to fix this is > to change the drive gear on output shaft with the one from toasted > case. The reason for this is because some jeeps could ship with 3.07 > axle ratio (which is a bad cruel joke anyway) and two different drive > gear sizes and drive gear combos are need to deal with a 3.07 and a > 4.10 properly > ----------------- > TheSnoMan.com -- Posted via a free Usenet account from http://www.teranews.com |
Re: Re: TJ Speedo gear issue
http://go.jeep-xj.info/HowtoSpeedoGears.htm
God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "SnoMan" <admin@snoman.com> wrote in message news:uv2ib317vahcve6kcqmsldr7guc4uq2t0l@4ax.com... > > You are not looking at this properly (as you tend to do anyway). > Speedo gears have a range of combos they can use and usually the have > two differen drive gears (worm gear on output shaft) and several > different driven gear on speedo cable. The PROPER way to fix this is > to change the drive gear on output shaft with the one from toasted > case. The reason for this is because some jeeps could ship with 3.07 > axle ratio (which is a bad cruel joke anyway) and two different drive > gear sizes and drive gear combos are need to deal with a 3.07 and a > 4.10 properly > ----------------- > TheSnoMan.com -- Posted via a free Usenet account from http://www.teranews.com |
Re: Re: TJ Speedo gear issue
You are full of bullsh*t as usual. The speedometer gear's housing is
clocked to mess the different sized teeth: http://go.jeep-xj.info/SpeedGear4.jpg God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "SnoMan" <admin@snoman.com> wrote in message news:uv2ib317vahcve6kcqmsldr7guc4uq2t0l@4ax.com... > > > You are not looking at this properly (as you tend to do anyway). > Speedo gears have a range of combos they can use and usually the have > two differen drive gears (worm gear on output shaft) and several > different driven gear on speedo cable. The PROPER way to fix this is > to change the drive gear on output shaft with the one from toasted > case. The reason for this is because some jeeps could ship with 3.07 > axle ratio (which is a bad cruel joke anyway) and two different drive > gear sizes and drive gear combos are need to deal with a 3.07 and a > 4.10 properly > ----------------- > TheSnoMan.com -- Posted via a free Usenet account from http://www.teranews.com |
All times are GMT -4. The time now is 08:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands