TJ mirror loose
 

The drivers side mirror on my 98 TJ needs to be adjusted every time I
get in my Jeep. I noticed 2 screws on the bottom of the mirror but they
seemed tight. Suggestions?

Re: TJ mirror loose
 

Anybody? I could have sworn I read about this problem a few years back.

Re: TJ mirror loose
 

Anybody? I could have sworn I read about this problem a few years back.

Re: TJ mirror loose
 

Anybody? I could have sworn I read about this problem a few years back.

Re: TJ mirror loose
 

Yes, and you may access the clamp screws under the rubber dust
cover between the mirror and housing.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Rich M wrote:
>
> Anybody? I could have sworn I read about this problem a few years back.

Re: TJ mirror loose
 

Yes, and you may access the clamp screws under the rubber dust
cover between the mirror and housing.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Rich M wrote:
>
> Anybody? I could have sworn I read about this problem a few years back.

Re: TJ mirror loose
 

Yes, and you may access the clamp screws under the rubber dust
cover between the mirror and housing.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Rich M wrote:
>
> Anybody? I could have sworn I read about this problem a few years back.

Re: TJ mirror loose
 

In article <41EAC1CE.BD57D79C@cox.net>,
L.W.(ßill) ------ III <----------@cox.net> wrote:

> Yes, and you may access the clamp screws under the rubber dust
> cover between the mirror and housing.

That's what I was looking for...thanks!

Re: TJ mirror loose
 

In article <41EAC1CE.BD57D79C@cox.net>,
L.W.(ßill) ------ III <----------@cox.net> wrote:

> Yes, and you may access the clamp screws under the rubber dust
> cover between the mirror and housing.

That's what I was looking for...thanks!

Re: TJ mirror loose
 

In article <41EAC1CE.BD57D79C@cox.net>,
L.W.(ßill) ------ III <----------@cox.net> wrote:

> Yes, and you may access the clamp screws under the rubber dust
> cover between the mirror and housing.

That's what I was looking for...thanks!