TJ Heater Question?
Guest
Posts: n/a
After rereading this I see your talking about the rheostat & not the switch, nevermind!
"Jersey" <IamHellbound@nospam.comcast.net> wrote in message
news:zeCdnTxSD_WwCwncRVn-tg@comcast.com...
> Might just be a bad switch.
>
> "sp" <dinglle71@yahoo.com> wrote in message news:9tv6p05vokkn8msdonrjpabr3btkaguhv0@4ax.com...
>> Hello,
>>
>> I have a problem with my heater.. It blows out heat just fine.. but
>> when I turn the dial up tp the highest level it cuts off..
>> Has anyone seen this problem before?
>>
>> TIA!!
>>
>> SP
>
>
"Jersey" <IamHellbound@nospam.comcast.net> wrote in message
news:zeCdnTxSD_WwCwncRVn-tg@comcast.com...
> Might just be a bad switch.
>
> "sp" <dinglle71@yahoo.com> wrote in message news:9tv6p05vokkn8msdonrjpabr3btkaguhv0@4ax.com...
>> Hello,
>>
>> I have a problem with my heater.. It blows out heat just fine.. but
>> when I turn the dial up tp the highest level it cuts off..
>> Has anyone seen this problem before?
>>
>> TIA!!
>>
>> SP
>
>
Guest
Posts: n/a
After rereading this I see your talking about the rheostat & not the switch, nevermind!
"Jersey" <IamHellbound@nospam.comcast.net> wrote in message
news:zeCdnTxSD_WwCwncRVn-tg@comcast.com...
> Might just be a bad switch.
>
> "sp" <dinglle71@yahoo.com> wrote in message news:9tv6p05vokkn8msdonrjpabr3btkaguhv0@4ax.com...
>> Hello,
>>
>> I have a problem with my heater.. It blows out heat just fine.. but
>> when I turn the dial up tp the highest level it cuts off..
>> Has anyone seen this problem before?
>>
>> TIA!!
>>
>> SP
>
>
"Jersey" <IamHellbound@nospam.comcast.net> wrote in message
news:zeCdnTxSD_WwCwncRVn-tg@comcast.com...
> Might just be a bad switch.
>
> "sp" <dinglle71@yahoo.com> wrote in message news:9tv6p05vokkn8msdonrjpabr3btkaguhv0@4ax.com...
>> Hello,
>>
>> I have a problem with my heater.. It blows out heat just fine.. but
>> when I turn the dial up tp the highest level it cuts off..
>> Has anyone seen this problem before?
>>
>> TIA!!
>>
>> SP
>
>
Guest
Posts: n/a
>>> I have a problem with my heater.. It blows out heat just fine.. but
>>> when I turn the dial up tp the highest level it cuts off..
>>> Has anyone seen this problem before?
>>>
>>> TIA!!
At the highest setting it is bypassing the resistor.The dash switch (in a 00
Cheeokee)connects to ground,dissconnect the plug at the resistor and check for
continuity between the harness and a good ground.At each fan setting a
different pin will have this.
>>> when I turn the dial up tp the highest level it cuts off..
>>> Has anyone seen this problem before?
>>>
>>> TIA!!
At the highest setting it is bypassing the resistor.The dash switch (in a 00
Cheeokee)connects to ground,dissconnect the plug at the resistor and check for
continuity between the harness and a good ground.At each fan setting a
different pin will have this.
Guest
Posts: n/a
>>> I have a problem with my heater.. It blows out heat just fine.. but
>>> when I turn the dial up tp the highest level it cuts off..
>>> Has anyone seen this problem before?
>>>
>>> TIA!!
At the highest setting it is bypassing the resistor.The dash switch (in a 00
Cheeokee)connects to ground,dissconnect the plug at the resistor and check for
continuity between the harness and a good ground.At each fan setting a
different pin will have this.
>>> when I turn the dial up tp the highest level it cuts off..
>>> Has anyone seen this problem before?
>>>
>>> TIA!!
At the highest setting it is bypassing the resistor.The dash switch (in a 00
Cheeokee)connects to ground,dissconnect the plug at the resistor and check for
continuity between the harness and a good ground.At each fan setting a
different pin will have this.
Guest
Posts: n/a
>>> I have a problem with my heater.. It blows out heat just fine.. but
>>> when I turn the dial up tp the highest level it cuts off..
>>> Has anyone seen this problem before?
>>>
>>> TIA!!
At the highest setting it is bypassing the resistor.The dash switch (in a 00
Cheeokee)connects to ground,dissconnect the plug at the resistor and check for
continuity between the harness and a good ground.At each fan setting a
different pin will have this.
>>> when I turn the dial up tp the highest level it cuts off..
>>> Has anyone seen this problem before?
>>>
>>> TIA!!
At the highest setting it is bypassing the resistor.The dash switch (in a 00
Cheeokee)connects to ground,dissconnect the plug at the resistor and check for
continuity between the harness and a good ground.At each fan setting a
different pin will have this.
Thread
Thread Starter
Forum
Replies
Last Post
Jamie Mello
Jeep Mailing List
0
Jul 8, 2007 01:01 PM
WildWestAZ
Jeep Mailing List
12
Nov 28, 2005 06:37 PM
Doug Boynton
Jeep Mailing List
31
Sep 15, 2005 09:22 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



