Re: tj doors
 

I roll down the window and place my shoulder under the top of the hard
door. I then stand, putting the weight of the door on my shoulder
while swinging the door back and forth. It should come out. If it's
really stuck place some penatrating oil in the hinge.

When you put the door back on, place some chassis or lithium grease in
the hinge. That way they come off easier next time.

If you really stuck, maybe knock up with a piece of wood from
underneath?

On Aug 2, 2:57 pm, "lurk" <m...@sbcglobal.net> wrote:
> I want to take the doors off my '06 TJ I took the nuts off the hinge
> pins but it won't lift out of the hinge.....I don't want to rap on it
> ...any suggestions ... thanks

Re: tj doors
 

Nick ------ wrote:
> I roll down the window and place my shoulder under the top of the hard
> door. I then stand, putting the weight of the door on my shoulder
> while swinging the door back and forth. It should come out. If it's
> really stuck place some penatrating oil in the hinge.
>
> When you put the door back on, place some chassis or lithium grease in
> the hinge. That way they come off easier next time.
>
> If you really stuck, maybe knock up with a piece of wood from
> underneath?
>
> On Aug 2, 2:57 pm, "lurk" <m...@sbcglobal.net> wrote:
>> I want to take the doors off my '06 TJ I took the nuts off the
>> hinge pins but it won't lift out of the hinge.....I don't want to
>> rap on it ...any suggestions ... thanks

If you have to tap on it use a sacrifical nut (threaded on a few threads
to protect the end of the bolt) Then tap through a hardwood drift
(I use the handle of a hammer) If there is still paint on the bolts
or the doors haven't been off in a while, it will take quite a bit
of work.

--
DougW

Re: tj doors
 

Nick ------ wrote:
> I roll down the window and place my shoulder under the top of the hard
> door. I then stand, putting the weight of the door on my shoulder
> while swinging the door back and forth. It should come out. If it's
> really stuck place some penatrating oil in the hinge.
>
> When you put the door back on, place some chassis or lithium grease in
> the hinge. That way they come off easier next time.
>
> If you really stuck, maybe knock up with a piece of wood from
> underneath?
>
> On Aug 2, 2:57 pm, "lurk" <m...@sbcglobal.net> wrote:
>> I want to take the doors off my '06 TJ I took the nuts off the
>> hinge pins but it won't lift out of the hinge.....I don't want to
>> rap on it ...any suggestions ... thanks

If you have to tap on it use a sacrifical nut (threaded on a few threads
to protect the end of the bolt) Then tap through a hardwood drift
(I use the handle of a hammer) If there is still paint on the bolts
or the doors haven't been off in a while, it will take quite a bit
of work.

--
DougW

Re: tj doors
 

Nick ------ wrote:
> I roll down the window and place my shoulder under the top of the hard
> door. I then stand, putting the weight of the door on my shoulder
> while swinging the door back and forth. It should come out. If it's
> really stuck place some penatrating oil in the hinge.
>
> When you put the door back on, place some chassis or lithium grease in
> the hinge. That way they come off easier next time.
>
> If you really stuck, maybe knock up with a piece of wood from
> underneath?
>
> On Aug 2, 2:57 pm, "lurk" <m...@sbcglobal.net> wrote:
>> I want to take the doors off my '06 TJ I took the nuts off the
>> hinge pins but it won't lift out of the hinge.....I don't want to
>> rap on it ...any suggestions ... thanks

If you have to tap on it use a sacrifical nut (threaded on a few threads
to protect the end of the bolt) Then tap through a hardwood drift
(I use the handle of a hammer) If there is still paint on the bolts
or the doors haven't been off in a while, it will take quite a bit
of work.

--
DougW

Re: tj doors
 

Nick ------ wrote:
> I roll down the window and place my shoulder under the top of the hard
> door. I then stand, putting the weight of the door on my shoulder
> while swinging the door back and forth. It should come out. If it's
> really stuck place some penatrating oil in the hinge.
>
> When you put the door back on, place some chassis or lithium grease in
> the hinge. That way they come off easier next time.
>
> If you really stuck, maybe knock up with a piece of wood from
> underneath?
>
> On Aug 2, 2:57 pm, "lurk" <m...@sbcglobal.net> wrote:
>> I want to take the doors off my '06 TJ I took the nuts off the
>> hinge pins but it won't lift out of the hinge.....I don't want to
>> rap on it ...any suggestions ... thanks

If you have to tap on it use a sacrifical nut (threaded on a few threads
to protect the end of the bolt) Then tap through a hardwood drift
(I use the handle of a hammer) If there is still paint on the bolts
or the doors haven't been off in a while, it will take quite a bit
of work.

--
DougW