Re: Threaded studs on TJ oil pan screws
Mike Romain writes:
> Then I would guess that the last person that took the engine apart lost > the pan bolts and just made do with what he found lying around on the > floor or bench. I expect these are original. |
Re: Threaded studs on TJ oil pan screws
Mike Romain writes:
> Then I would guess that the last person that took the engine apart lost > the pan bolts and just made do with what he found lying around on the > floor or bench. I expect these are original. |
Re: Threaded studs on TJ oil pan screws
Mike Romain writes:
> Then I would guess that the last person that took the engine apart lost > the pan bolts and just made do with what he found lying around on the > floor or bench. I expect these are original. |
Re: Threaded studs on TJ oil pan screws
Richard J Kinch wrote:
> > Mike Romain writes: > > > Then I would guess that the last person that took the engine apart lost > > the pan bolts and just made do with what he found lying around on the > > floor or bench. > > I expect these are original. Ouch.... Was it the end of a production year or something where they ran out of the proper bolts? I got 'lucky' that way on my CJ7. They ran out of stock AMC rear ends so they put a Dana 44 in... The only time I normally see the studs on top of the nut like that is when a bracket or wire needs to be bolted on after the part is assembled or as I mentioned, someone screwed up and lost parts. Is there any pattern to them or are they just random? Maybe they are to position the engine in an assembly jig or something? Are they pointy ends, slot ends, hex ends or just flat? Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Threaded studs on TJ oil pan screws
Richard J Kinch wrote:
> > Mike Romain writes: > > > Then I would guess that the last person that took the engine apart lost > > the pan bolts and just made do with what he found lying around on the > > floor or bench. > > I expect these are original. Ouch.... Was it the end of a production year or something where they ran out of the proper bolts? I got 'lucky' that way on my CJ7. They ran out of stock AMC rear ends so they put a Dana 44 in... The only time I normally see the studs on top of the nut like that is when a bracket or wire needs to be bolted on after the part is assembled or as I mentioned, someone screwed up and lost parts. Is there any pattern to them or are they just random? Maybe they are to position the engine in an assembly jig or something? Are they pointy ends, slot ends, hex ends or just flat? Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Threaded studs on TJ oil pan screws
Richard J Kinch wrote:
> > Mike Romain writes: > > > Then I would guess that the last person that took the engine apart lost > > the pan bolts and just made do with what he found lying around on the > > floor or bench. > > I expect these are original. Ouch.... Was it the end of a production year or something where they ran out of the proper bolts? I got 'lucky' that way on my CJ7. They ran out of stock AMC rear ends so they put a Dana 44 in... The only time I normally see the studs on top of the nut like that is when a bracket or wire needs to be bolted on after the part is assembled or as I mentioned, someone screwed up and lost parts. Is there any pattern to them or are they just random? Maybe they are to position the engine in an assembly jig or something? Are they pointy ends, slot ends, hex ends or just flat? Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Threaded studs on TJ oil pan screws
various fasteners go on them for auto trans lines and o2 sensor wires
Richard J Kinch wrote: > About half of the oil pan screws on my TJ are plain cap screws, and half > have a threaded stud projecting. None of the studs do anything that I can > see. > > What are these studs for? |
Re: Threaded studs on TJ oil pan screws
various fasteners go on them for auto trans lines and o2 sensor wires
Richard J Kinch wrote: > About half of the oil pan screws on my TJ are plain cap screws, and half > have a threaded stud projecting. None of the studs do anything that I can > see. > > What are these studs for? |
Re: Threaded studs on TJ oil pan screws
various fasteners go on them for auto trans lines and o2 sensor wires
Richard J Kinch wrote: > About half of the oil pan screws on my TJ are plain cap screws, and half > have a threaded stud projecting. None of the studs do anything that I can > see. > > What are these studs for? |
Re: Threaded studs on TJ oil pan screws
philthy wrote:
> various fasteners go on them for auto trans lines and o2 sensor wires Woo hoo.. a correct answer. :) http://www.revbeergoggles.com/temp/side-i6.jpg At the bottom you see the O2 sensor connector. That's pushed on one of those studs that hang down from the oil pan. Rather than make many different setups for each production vehicle they simply put studs where they would be needed no matter what vehicle the engine will be installed in. > Richard J Kinch wrote: > >> About half of the oil pan screws on my TJ are plain cap screws, and >> half have a threaded stud projecting. None of the studs do anything >> that I can see. >> >> What are these studs for? |
All times are GMT -4. The time now is 01:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands