T5 inspection plate
 

Hi all-
I am trying to remove the inspection plate on a T5 transmission from a '83
CJ7. The plate seems to be attached to the shift rod or I missed a fastener
or something. The reason I want to remove the plate is to address some
binding in the shift rod. The shifter will go front to back easily but side
to side (neutral) is impossible with the shifter and very difficult with the
shifter removed and operated with large cheater. I see there are some
indents under the shift rod where a ball bearing and spring might go. Could
this be the problem area? Any assistance or insight would be greatly
appreciated.
Thanks
Dan

Re: T5 inspection plate
 

Hi Dan,
I've never heard of that. Maybe pieces of the bushing have fallen
in the way, and with that dirt form outside:
http://www.ttcautomotive.com/English...ice_Manual.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Dan wrote:
>
> Hi all-
> I am trying to remove the inspection plate on a T5 transmission from a '83
> CJ7. The plate seems to be attached to the shift rod or I missed a fastener
> or something. The reason I want to remove the plate is to address some
> binding in the shift rod. The shifter will go front to back easily but side
> to side (neutral) is impossible with the shifter and very difficult with the
> shifter removed and operated with large cheater. I see there are some
> indents under the shift rod where a ball bearing and spring might go. Could
> this be the problem area? Any assistance or insight would be greatly
> appreciated.
> Thanks
> Dan

Re: T5 inspection plate
 

Hi Dan,
I've never heard of that. Maybe pieces of the bushing have fallen
in the way, and with that dirt form outside:
http://www.ttcautomotive.com/English...ice_Manual.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Dan wrote:
>
> Hi all-
> I am trying to remove the inspection plate on a T5 transmission from a '83
> CJ7. The plate seems to be attached to the shift rod or I missed a fastener
> or something. The reason I want to remove the plate is to address some
> binding in the shift rod. The shifter will go front to back easily but side
> to side (neutral) is impossible with the shifter and very difficult with the
> shifter removed and operated with large cheater. I see there are some
> indents under the shift rod where a ball bearing and spring might go. Could
> this be the problem area? Any assistance or insight would be greatly
> appreciated.
> Thanks
> Dan

Re: T5 inspection plate
 

Hi Dan,
I've never heard of that. Maybe pieces of the bushing have fallen
in the way, and with that dirt form outside:
http://www.ttcautomotive.com/English...ice_Manual.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Dan wrote:
>
> Hi all-
> I am trying to remove the inspection plate on a T5 transmission from a '83
> CJ7. The plate seems to be attached to the shift rod or I missed a fastener
> or something. The reason I want to remove the plate is to address some
> binding in the shift rod. The shifter will go front to back easily but side
> to side (neutral) is impossible with the shifter and very difficult with the
> shifter removed and operated with large cheater. I see there are some
> indents under the shift rod where a ball bearing and spring might go. Could
> this be the problem area? Any assistance or insight would be greatly
> appreciated.
> Thanks
> Dan

Re: T5 inspection plate
 

Thanks Bill.
The disassembly instructions will no doubt prove invaluable. I furthermore
hope the reassembly instructions are easy to understand!

Re: T5 inspection plate
 

Thanks Bill.
The disassembly instructions will no doubt prove invaluable. I furthermore
hope the reassembly instructions are easy to understand!

Re: T5 inspection plate
 

Thanks Bill.
The disassembly instructions will no doubt prove invaluable. I furthermore
hope the reassembly instructions are easy to understand!