|
Re: Stupid OEM bikini question
Snow - Its polka dotted and teenie which is what is causing the trouble.
Jeff - Guy said he got it from DC and the only tags on it say "JEEP" with the trademark symbol (all three pieces). I assumed that would mean OEM but hey... Bill - If it was the same unit as Bestop's site I would have no questions. It isn't the same. I was just wondering if someone had the the same type of top and where it was designed to go. Thanx anyway... -- wquin@bigfoot.nospam.com (Please remove the "nospam" when replying) 2000 TJ - OME, 31x10,and a lot of wishfull thinking "L.W. ("ßill") ------ III" <----------@cox.net> wrote in message news:41FBE12C.5669ABEA@cox.net... > http://www.bestop.com/installation_guides/52525.pdf > God Bless America, ßill O|||||||O > mailto:-------------------- http://www.----------.com/ > > Hooligan wrote: >> >> I bought a used OEM bikini, windjammer, tonneau combo off a 97 (says >> "Jeep" >> on the tags, so I'm assuming its OEM). The header is a two piece, screw >> on >> flat aluminum arrangement with a round channel for the front of the top. >> Because the aluminum is brite, I assume the top must fold back over it in >> some fashion. Now where does this thing bolt on? >> >> On my CJ it bolted down on top of the windshield, slot forward. The >> Bestop >> site shows their channel bolted to the inside of the windshield slot up >> (seems that that would rip off at highway speeds). The guy I got it from >> said "when i got it installed on my jeep they installed it outside just >> above my window but its suppose 2 be installed inside ontop of the rubber >> where your hard top sits", which I'm having a hard time picturing... >> >> I'm at a loss. I can't seem to locate anything specific for this unit and >> the local dealers are not very helpful. Does anyone have one and know how >> it >> was originally intended to go on? >> >> Its still dead of winter here so I can't go play on the TJ but I want to >> get >> everything together for those first rays of hope... >> >> Thanx in advance for any pointers... >> >> -- >> wquin@bigfoot.nospam.com >> (Please remove the "nospam" when replying) >> >> 2000 TJ - OME, 31x10,and a lot of wishfull thinking |
Re: Stupid OEM bikini question
Snow - Its polka dotted and teenie which is what is causing the trouble.
Jeff - Guy said he got it from DC and the only tags on it say "JEEP" with the trademark symbol (all three pieces). I assumed that would mean OEM but hey... Bill - If it was the same unit as Bestop's site I would have no questions. It isn't the same. I was just wondering if someone had the the same type of top and where it was designed to go. Thanx anyway... -- wquin@bigfoot.nospam.com (Please remove the "nospam" when replying) 2000 TJ - OME, 31x10,and a lot of wishfull thinking "L.W. ("ßill") ------ III" <----------@cox.net> wrote in message news:41FBE12C.5669ABEA@cox.net... > http://www.bestop.com/installation_guides/52525.pdf > God Bless America, ßill O|||||||O > mailto:-------------------- http://www.----------.com/ > > Hooligan wrote: >> >> I bought a used OEM bikini, windjammer, tonneau combo off a 97 (says >> "Jeep" >> on the tags, so I'm assuming its OEM). The header is a two piece, screw >> on >> flat aluminum arrangement with a round channel for the front of the top. >> Because the aluminum is brite, I assume the top must fold back over it in >> some fashion. Now where does this thing bolt on? >> >> On my CJ it bolted down on top of the windshield, slot forward. The >> Bestop >> site shows their channel bolted to the inside of the windshield slot up >> (seems that that would rip off at highway speeds). The guy I got it from >> said "when i got it installed on my jeep they installed it outside just >> above my window but its suppose 2 be installed inside ontop of the rubber >> where your hard top sits", which I'm having a hard time picturing... >> >> I'm at a loss. I can't seem to locate anything specific for this unit and >> the local dealers are not very helpful. Does anyone have one and know how >> it >> was originally intended to go on? >> >> Its still dead of winter here so I can't go play on the TJ but I want to >> get >> everything together for those first rays of hope... >> >> Thanx in advance for any pointers... >> >> -- >> wquin@bigfoot.nospam.com >> (Please remove the "nospam" when replying) >> >> 2000 TJ - OME, 31x10,and a lot of wishfull thinking |
Re: Stupid OEM bikini question
Snow - Its polka dotted and teenie which is what is causing the trouble.
Jeff - Guy said he got it from DC and the only tags on it say "JEEP" with the trademark symbol (all three pieces). I assumed that would mean OEM but hey... Bill - If it was the same unit as Bestop's site I would have no questions. It isn't the same. I was just wondering if someone had the the same type of top and where it was designed to go. Thanx anyway... -- wquin@bigfoot.nospam.com (Please remove the "nospam" when replying) 2000 TJ - OME, 31x10,and a lot of wishfull thinking "L.W. ("ßill") ------ III" <----------@cox.net> wrote in message news:41FBE12C.5669ABEA@cox.net... > http://www.bestop.com/installation_guides/52525.pdf > God Bless America, ßill O|||||||O > mailto:-------------------- http://www.----------.com/ > > Hooligan wrote: >> >> I bought a used OEM bikini, windjammer, tonneau combo off a 97 (says >> "Jeep" >> on the tags, so I'm assuming its OEM). The header is a two piece, screw >> on >> flat aluminum arrangement with a round channel for the front of the top. >> Because the aluminum is brite, I assume the top must fold back over it in >> some fashion. Now where does this thing bolt on? >> >> On my CJ it bolted down on top of the windshield, slot forward. The >> Bestop >> site shows their channel bolted to the inside of the windshield slot up >> (seems that that would rip off at highway speeds). The guy I got it from >> said "when i got it installed on my jeep they installed it outside just >> above my window but its suppose 2 be installed inside ontop of the rubber >> where your hard top sits", which I'm having a hard time picturing... >> >> I'm at a loss. I can't seem to locate anything specific for this unit and >> the local dealers are not very helpful. Does anyone have one and know how >> it >> was originally intended to go on? >> >> Its still dead of winter here so I can't go play on the TJ but I want to >> get >> everything together for those first rays of hope... >> >> Thanx in advance for any pointers... >> >> -- >> wquin@bigfoot.nospam.com >> (Please remove the "nospam" when replying) >> >> 2000 TJ - OME, 31x10,and a lot of wishfull thinking |
Re: Stupid OEM bikini question
On Sat, 29 Jan 2005 20:22:07 GMT, "Hooligan"
<wquin@bigfoot.nospam.com> wrote: >Snow - Its polka dotted and teenie which is what is causing the trouble. > >Jeff - Guy said he got it from DC and the only tags on it say "JEEP" with >the trademark symbol (all three pieces). I assumed that would mean OEM but >hey... > >Bill - If it was the same unit as Bestop's site I would have no questions. >It isn't the same. > >I was just wondering if someone had the the same type of top and where it >was designed to go. > >Thanx anyway... My kid's got one with aa OEM Jeep tag on it also. I got it for him from a Jeep that was traded in where I work. He had to go to the dealer and get the channel, as it wasn't on the Jeep I got the top out of. The channel mounts to the inside of the window frame with a bunch of sheet metal screws, and is different from the header that is part of the soft top. I'd describe it better, but he did the install, and the Jeep's about 70 miles from here, so I can't just go out and look at it. -- Old Crow '82 Shovelhead FLTC 92" 'Pearl' '95 Jeep Wrangler YJ TOMKAT, BS#133, SENS, MAMBM, DOF#51, SPUNGER#2 |
Re: Stupid OEM bikini question
On Sat, 29 Jan 2005 20:22:07 GMT, "Hooligan"
<wquin@bigfoot.nospam.com> wrote: >Snow - Its polka dotted and teenie which is what is causing the trouble. > >Jeff - Guy said he got it from DC and the only tags on it say "JEEP" with >the trademark symbol (all three pieces). I assumed that would mean OEM but >hey... > >Bill - If it was the same unit as Bestop's site I would have no questions. >It isn't the same. > >I was just wondering if someone had the the same type of top and where it >was designed to go. > >Thanx anyway... My kid's got one with aa OEM Jeep tag on it also. I got it for him from a Jeep that was traded in where I work. He had to go to the dealer and get the channel, as it wasn't on the Jeep I got the top out of. The channel mounts to the inside of the window frame with a bunch of sheet metal screws, and is different from the header that is part of the soft top. I'd describe it better, but he did the install, and the Jeep's about 70 miles from here, so I can't just go out and look at it. -- Old Crow '82 Shovelhead FLTC 92" 'Pearl' '95 Jeep Wrangler YJ TOMKAT, BS#133, SENS, MAMBM, DOF#51, SPUNGER#2 |
Re: Stupid OEM bikini question
On Sat, 29 Jan 2005 20:22:07 GMT, "Hooligan"
<wquin@bigfoot.nospam.com> wrote: >Snow - Its polka dotted and teenie which is what is causing the trouble. > >Jeff - Guy said he got it from DC and the only tags on it say "JEEP" with >the trademark symbol (all three pieces). I assumed that would mean OEM but >hey... > >Bill - If it was the same unit as Bestop's site I would have no questions. >It isn't the same. > >I was just wondering if someone had the the same type of top and where it >was designed to go. > >Thanx anyway... My kid's got one with aa OEM Jeep tag on it also. I got it for him from a Jeep that was traded in where I work. He had to go to the dealer and get the channel, as it wasn't on the Jeep I got the top out of. The channel mounts to the inside of the window frame with a bunch of sheet metal screws, and is different from the header that is part of the soft top. I'd describe it better, but he did the install, and the Jeep's about 70 miles from here, so I can't just go out and look at it. -- Old Crow '82 Shovelhead FLTC 92" 'Pearl' '95 Jeep Wrangler YJ TOMKAT, BS#133, SENS, MAMBM, DOF#51, SPUNGER#2 |
Re: Stupid OEM bikini question
"Hooligan" <wquin@bigfoot.nospam.com> wrote in message news:PfSKd.221188$Np3.9267045@ursa-nb00s0.nbnet.nb.ca... > Snow - Its polka dotted and teenie which is what is causing the trouble. > > Jeff - Guy said he got it from DC and the only tags on it say "JEEP" with > the trademark symbol (all three pieces). I assumed that would mean OEM but > hey... > I was not aware that there was an OEM bikini. DC gets its top from Bestop, and it is certainly possible that Bestop might have made a bikini that it sold through Jeep, or sold and Jeep allowed them to put the logo on. I guess the bottom line is, how do you install the header? |
Re: Stupid OEM bikini question
"Hooligan" <wquin@bigfoot.nospam.com> wrote in message news:PfSKd.221188$Np3.9267045@ursa-nb00s0.nbnet.nb.ca... > Snow - Its polka dotted and teenie which is what is causing the trouble. > > Jeff - Guy said he got it from DC and the only tags on it say "JEEP" with > the trademark symbol (all three pieces). I assumed that would mean OEM but > hey... > I was not aware that there was an OEM bikini. DC gets its top from Bestop, and it is certainly possible that Bestop might have made a bikini that it sold through Jeep, or sold and Jeep allowed them to put the logo on. I guess the bottom line is, how do you install the header? |
Re: Stupid OEM bikini question
"Hooligan" <wquin@bigfoot.nospam.com> wrote in message news:PfSKd.221188$Np3.9267045@ursa-nb00s0.nbnet.nb.ca... > Snow - Its polka dotted and teenie which is what is causing the trouble. > > Jeff - Guy said he got it from DC and the only tags on it say "JEEP" with > the trademark symbol (all three pieces). I assumed that would mean OEM but > hey... > I was not aware that there was an OEM bikini. DC gets its top from Bestop, and it is certainly possible that Bestop might have made a bikini that it sold through Jeep, or sold and Jeep allowed them to put the logo on. I guess the bottom line is, how do you install the header? |
Re: Stupid OEM bikini question
And thats the part I don't know. The header is 2 pieces of brite aluminim
with a round channel for the leading edge of the top. Sort of shaped like this when looked at end on: _____(_) The flat section has no cutouts like the pictures on the Bestop site to get around the footman loop, ST/HT clamps, etc. The channel does have a small lip on the bottom of both the forward and trailing lengthwise edge. Almost like it should fit over something. If you bolted it to something flat it would bow in in the center. What started this was that I bought it via email and I wanted to make sure that I got the proper gear from the sale while it was fresh. Not try and fix a problem after several months when I can actually get it on... The canvas parts looks band new, but the the channel didn't look like anything I had seen or could find. The DC dealerships here in Sait John just looked blank. I guess I will have to wait until I can lift the HT and experiment. The hazards of buying summer gear in the dead of winter I guess... -- wquin@bigfoot.nospam.com (Please remove the "nospam" when replying) 2000 TJ - OME, 31x10,and a lot of wishfull thinking "Jeff Strickland" <crwlr@yahoo.com> wrote in message news:pt-dnU3ENsT8pmDcRVn-3Q@ez2.net... > > "Hooligan" <wquin@bigfoot.nospam.com> wrote in message > news:PfSKd.221188$Np3.9267045@ursa-nb00s0.nbnet.nb.ca... >> Snow - Its polka dotted and teenie which is what is causing the trouble. >> >> Jeff - Guy said he got it from DC and the only tags on it say "JEEP" with >> the trademark symbol (all three pieces). I assumed that would mean OEM >> but hey... >> > > I was not aware that there was an OEM bikini. DC gets its top from Bestop, > and it is certainly possible that Bestop might have made a bikini that it > sold through Jeep, or sold and Jeep allowed them to put the logo on. > > I guess the bottom line is, how do you install the header? > > > > > > |
| All times are GMT -4. The time now is 05:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands