Stock Pitman Arm needed
 

Hey Everyone,
My Scrambler needs some help on the pitman arm. It's got 2" shackle
lift/reversal kit, 2" springs of some variety and 33's. The linkage on the
Jeep when i bought it (stock shackles) was bent with a torch and made to fit.
I replaced the bent parts and added a drop arm. Worked well. Now i added the
shackle kit and heavy-duty tie rod tube, but the drop pitman arm rubs the tie
rod tube. My stock pitman arm is long gone, and i'd like to try one again. So
far no help on eBay.

Thanks,
Don W

Re: Stock Pitman Arm needed
 

That's power steering, '82 CJ 8 Scrambler.

Don W

Re: Stock Pitman Arm needed
 

That's power steering, '82 CJ 8 Scrambler.

Don W

Re: Stock Pitman Arm needed
 

That's power steering, '82 CJ 8 Scrambler.

Don W

Re: Stock Pitman Arm needed
 

That's power steering, '82 CJ 8 Scrambler.

Don W

Re: Stock Pitman Arm needed
 

Don Wallish (quicktruck@aol.comnospam) wrote on Thursday 27 May 2004 08:29
pm:

> That's power steering, '82 CJ 8 Scrambler.
>
> Don W

Quadratec has them for about $28, 4wd for about $29.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer, 1891

Re: Stock Pitman Arm needed
 

Don Wallish (quicktruck@aol.comnospam) wrote on Thursday 27 May 2004 08:29
pm:

> That's power steering, '82 CJ 8 Scrambler.
>
> Don W

Quadratec has them for about $28, 4wd for about $29.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer, 1891

Re: Stock Pitman Arm needed
 

Don Wallish (quicktruck@aol.comnospam) wrote on Thursday 27 May 2004 08:29
pm:

> That's power steering, '82 CJ 8 Scrambler.
>
> Don W

Quadratec has them for about $28, 4wd for about $29.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer, 1891

Re: Stock Pitman Arm needed
 

Don Wallish (quicktruck@aol.comnospam) wrote on Thursday 27 May 2004 08:29
pm:

> That's power steering, '82 CJ 8 Scrambler.
>
> Don W

Quadratec has them for about $28, 4wd for about $29.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer, 1891

Re: Stock Pitman Arm needed
 

You may kiss your front driveshaft away, as soon as you climb over
something: http://www.----------.com/pullapart.jpg
http://www.off-road.com/jeep/tech/susp/elkcahs/
God Bless America, ßill O|||||||O
mailto:--------------------

Don Wallish wrote:
>
> Hey Everyone,
> My Scrambler needs some help on the pitman arm. It's got 2" shackle
> lift/reversal kit, 2" springs of some variety and 33's. The linkage on the
> Jeep when i bought it (stock shackles) was bent with a torch and made to fit.
> I replaced the bent parts and added a drop arm. Worked well. Now i added the
> shackle kit and heavy-duty tie rod tube, but the drop pitman arm rubs the tie
> rod tube. My stock pitman arm is long gone, and i'd like to try one again. So
> far no help on eBay.
>
> Thanks,
> Don W