I'm looking to replace the stock Oil Pressure gauge with one from Autometer.
The Autometer size gauge is 2-1/16 inch. The closest information I could
find on the stock CJ said it was 2 inches. Does anyone know the exact size
of the stock CJ7 Oil Pressure Gauge and if the Autometer 2-1/16 gauge would
be a direct replacement?


Thanks,

Bill

 

On or about Tue, 18 Nov 2003, William Oliveri of wuji@bigvalley.net wrote:

> I'm looking to replace the stock Oil Pressure gauge with one from
> Autometer. The Autometer size gauge is 2-1/16 inch. The closest
> information I could find on the stock CJ said it was 2 inches. Does
> anyone know the exact size of the stock CJ7 Oil Pressure Gauge and if
> the Autometer 2-1/16 gauge would be a direct replacement?

I just measured my junk dash from a `78 CJ-5. The factory gauge hole is 2
1/16" diameter. The factory gauge is 2". I cannot say if the Autometer
gauge is electrically compatable with the OEM sender, but you should be
able to swap in the Autometer sender.

 

On or about Tue, 18 Nov 2003, William Oliveri of wuji@bigvalley.net wrote:

> I'm looking to replace the stock Oil Pressure gauge with one from
> Autometer. The Autometer size gauge is 2-1/16 inch. The closest
> information I could find on the stock CJ said it was 2 inches. Does
> anyone know the exact size of the stock CJ7 Oil Pressure Gauge and if
> the Autometer 2-1/16 gauge would be a direct replacement?

I just measured my junk dash from a `78 CJ-5. The factory gauge hole is 2
1/16" diameter. The factory gauge is 2". I cannot say if the Autometer
gauge is electrically compatable with the OEM sender, but you should be
able to swap in the Autometer sender.

 

On or about Tue, 18 Nov 2003, William Oliveri of wuji@bigvalley.net wrote:

> I'm looking to replace the stock Oil Pressure gauge with one from
> Autometer. The Autometer size gauge is 2-1/16 inch. The closest
> information I could find on the stock CJ said it was 2 inches. Does
> anyone know the exact size of the stock CJ7 Oil Pressure Gauge and if
> the Autometer 2-1/16 gauge would be a direct replacement?

I just measured my junk dash from a `78 CJ-5. The factory gauge hole is 2
1/16" diameter. The factory gauge is 2". I cannot say if the Autometer
gauge is electrically compatable with the OEM sender, but you should be
able to swap in the Autometer sender.

 

the guages you fond should drop right in. I replaced my guages a few years
ago with some El Cheapos, and I am ready for some good ones now. There are
no other guages that are the same size, there are some that are much larger,
and some that are smaller, but any guage that bills itself as being close to
2" is the right size.




"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bpdi4o$1mkvk2$1@ID-193866.news.uni-berlin.de...
> I'm looking to replace the stock Oil Pressure gauge with one from
Autometer.
> The Autometer size gauge is 2-1/16 inch. The closest information I could
> find on the stock CJ said it was 2 inches. Does anyone know the exact
size
> of the stock CJ7 Oil Pressure Gauge and if the Autometer 2-1/16 gauge
would
> be a direct replacement?
>
>
> Thanks,
>
> Bill
>
>

 

the guages you fond should drop right in. I replaced my guages a few years
ago with some El Cheapos, and I am ready for some good ones now. There are
no other guages that are the same size, there are some that are much larger,
and some that are smaller, but any guage that bills itself as being close to
2" is the right size.




"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bpdi4o$1mkvk2$1@ID-193866.news.uni-berlin.de...
> I'm looking to replace the stock Oil Pressure gauge with one from
Autometer.
> The Autometer size gauge is 2-1/16 inch. The closest information I could
> find on the stock CJ said it was 2 inches. Does anyone know the exact
size
> of the stock CJ7 Oil Pressure Gauge and if the Autometer 2-1/16 gauge
would
> be a direct replacement?
>
>
> Thanks,
>
> Bill
>
>

 

the guages you fond should drop right in. I replaced my guages a few years
ago with some El Cheapos, and I am ready for some good ones now. There are
no other guages that are the same size, there are some that are much larger,
and some that are smaller, but any guage that bills itself as being close to
2" is the right size.




"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bpdi4o$1mkvk2$1@ID-193866.news.uni-berlin.de...
> I'm looking to replace the stock Oil Pressure gauge with one from
Autometer.
> The Autometer size gauge is 2-1/16 inch. The closest information I could
> find on the stock CJ said it was 2 inches. Does anyone know the exact
size
> of the stock CJ7 Oil Pressure Gauge and if the Autometer 2-1/16 gauge
would
> be a direct replacement?
>
>
> Thanks,
>
> Bill
>
>