|
Re: Steering wheel lock plate
Solenoid? What solenoid, Bill?
The lock plate is engaged by mechanical linkage tied to the ignition switch, and is operated by the key. "L.W. (Bill) ------ III" <----------@cox.net> wrote in message news:51suqbF1lq0apU1@mid.individual.net... > Replace the solenoid, it is very common for them to weld together > especially with the high amperage draw with a bad starter, and a low > battery. > God Bless America, Bill 0|||||||0 > mailto:-------------------- http://www.----------.com/ > > "Jimmie D" <jimmiedee@bellsouth.net> wrote in message > news:t47uh.9550$Cg1.6635@bignews8.bellsouth.net... >> I need to remove the lock plate on my 92 cherokee to replace the turn >> signal/ dimmer switch but cant get the lock plate off. >> I would cut the retaining clip if I knew I didnt need to put it back on. > Its >> just an old fishing car I use to pull my boat down to the lake so Im not >> worried if the steering wheel doesnt lock.. YEs Ive seen the tools for > doing >> it and dont want to pay the money if I dont have to. >> >> Thanks Jimmie >> >> > > |
Re: Steering wheel lock plate
Thanks for the detailed pictures.
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message news:epbpug$tkv$1@aioe.org... > Tightening up the wobbly column is a little intensive in that you have > to remove everything above the joint. Make sure you take pictures or > something to make sure you remember how everything came off. > I had a problem reinstalling mine because the bearings under the spring > behind the lockplate didn't seat correctly and I ended up bending the > lockplate and tearing up my turn signal switch, eventually leading me to > just buy a steering column from a junkyard. > i have pictures of mine, although Bill's links have a write-up, so > they'll probably be more help. > http://s143.photobucket.com/albums/r...heel%20repair/ |
Re: Steering wheel lock plate
Thanks for the detailed pictures.
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message news:epbpug$tkv$1@aioe.org... > Tightening up the wobbly column is a little intensive in that you have > to remove everything above the joint. Make sure you take pictures or > something to make sure you remember how everything came off. > I had a problem reinstalling mine because the bearings under the spring > behind the lockplate didn't seat correctly and I ended up bending the > lockplate and tearing up my turn signal switch, eventually leading me to > just buy a steering column from a junkyard. > i have pictures of mine, although Bill's links have a write-up, so > they'll probably be more help. > http://s143.photobucket.com/albums/r...heel%20repair/ |
Re: Steering wheel lock plate
Thanks for the detailed pictures.
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message news:epbpug$tkv$1@aioe.org... > Tightening up the wobbly column is a little intensive in that you have > to remove everything above the joint. Make sure you take pictures or > something to make sure you remember how everything came off. > I had a problem reinstalling mine because the bearings under the spring > behind the lockplate didn't seat correctly and I ended up bending the > lockplate and tearing up my turn signal switch, eventually leading me to > just buy a steering column from a junkyard. > i have pictures of mine, although Bill's links have a write-up, so > they'll probably be more help. > http://s143.photobucket.com/albums/r...heel%20repair/ |
Re: Steering wheel lock plate
Thanks for the detailed pictures.
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message news:epbpug$tkv$1@aioe.org... > Tightening up the wobbly column is a little intensive in that you have > to remove everything above the joint. Make sure you take pictures or > something to make sure you remember how everything came off. > I had a problem reinstalling mine because the bearings under the spring > behind the lockplate didn't seat correctly and I ended up bending the > lockplate and tearing up my turn signal switch, eventually leading me to > just buy a steering column from a junkyard. > i have pictures of mine, although Bill's links have a write-up, so > they'll probably be more help. > http://s143.photobucket.com/albums/r...heel%20repair/ |
Re: Steering wheel lock plate
Most people would have guess I posted under the wrong thread.
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "Jeff Strickland" <crwlr@verizon.net> wrote in message news:Egquh.11617$uL6.1838@trnddc03... > Solenoid? What solenoid, Bill? > > The lock plate is engaged by mechanical linkage tied to the ignition switch, > and is operated by the key. |
Re: Steering wheel lock plate
Most people would have guess I posted under the wrong thread.
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "Jeff Strickland" <crwlr@verizon.net> wrote in message news:Egquh.11617$uL6.1838@trnddc03... > Solenoid? What solenoid, Bill? > > The lock plate is engaged by mechanical linkage tied to the ignition switch, > and is operated by the key. |
Re: Steering wheel lock plate
Most people would have guess I posted under the wrong thread.
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "Jeff Strickland" <crwlr@verizon.net> wrote in message news:Egquh.11617$uL6.1838@trnddc03... > Solenoid? What solenoid, Bill? > > The lock plate is engaged by mechanical linkage tied to the ignition switch, > and is operated by the key. |
Re: Steering wheel lock plate
Most people would have guess I posted under the wrong thread.
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "Jeff Strickland" <crwlr@verizon.net> wrote in message news:Egquh.11617$uL6.1838@trnddc03... > Solenoid? What solenoid, Bill? > > The lock plate is engaged by mechanical linkage tied to the ignition switch, > and is operated by the key. |
Re: Steering wheel lock plate
> Most people would have guess I posted under the wrong thread. And which thread would that be? -- We Need a President Who's Fluent In At Least One Language |
Re: Steering wheel lock plate
> Most people would have guess I posted under the wrong thread. And which thread would that be? -- We Need a President Who's Fluent In At Least One Language |
Re: Steering wheel lock plate
> Most people would have guess I posted under the wrong thread. And which thread would that be? -- We Need a President Who's Fluent In At Least One Language |
Re: Steering wheel lock plate
> Most people would have guess I posted under the wrong thread. And which thread would that be? -- We Need a President Who's Fluent In At Least One Language |
Re: Steering wheel lock plate
People that are unimportant to the group, probably won't be able to
think to find it. God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "§qu@r3 Wh33£s" <bubonic@germ.net> wrote in message news:H8wuh.820900$R63.18264@pd7urf1no... > > And which thread would that be? > > > -- |
Re: Steering wheel lock plate
People that are unimportant to the group, probably won't be able to
think to find it. God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "§qu@r3 Wh33£s" <bubonic@germ.net> wrote in message news:H8wuh.820900$R63.18264@pd7urf1no... > > And which thread would that be? > > > -- |
Re: Steering wheel lock plate
People that are unimportant to the group, probably won't be able to
think to find it. God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "§qu@r3 Wh33£s" <bubonic@germ.net> wrote in message news:H8wuh.820900$R63.18264@pd7urf1no... > > And which thread would that be? > > > -- |
Re: Steering wheel lock plate
People that are unimportant to the group, probably won't be able to
think to find it. God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "§qu@r3 Wh33£s" <bubonic@germ.net> wrote in message news:H8wuh.820900$R63.18264@pd7urf1no... > > And which thread would that be? > > > -- |
Re: Steering wheel lock plate
I thought I was important to the group, and I can't find it even if I think
long and hard. Assuming I am right about my self professed grandure and my intellect, then it stands to logic that anybody less important than I would have difficulty too. My guess is that the people that really are important, and smart, can't find it either. But, hey, it's probalby just me. "L.W. (Bill) ------ III" <----------@cox.net> wrote in message news:51vkt2F1jf3q4U1@mid.individual.net... > People that are unimportant to the group, probably won't be able to > think to find it. > God Bless America, Bill 0|||||||0 > mailto:-------------------- http://www.----------.com/ > > "§qu@r3 Wh33£s" <bubonic@germ.net> wrote in message > news:H8wuh.820900$R63.18264@pd7urf1no... >> >> And which thread would that be? >> >> >> -- > > |
Re: Steering wheel lock plate
I thought I was important to the group, and I can't find it even if I think
long and hard. Assuming I am right about my self professed grandure and my intellect, then it stands to logic that anybody less important than I would have difficulty too. My guess is that the people that really are important, and smart, can't find it either. But, hey, it's probalby just me. "L.W. (Bill) ------ III" <----------@cox.net> wrote in message news:51vkt2F1jf3q4U1@mid.individual.net... > People that are unimportant to the group, probably won't be able to > think to find it. > God Bless America, Bill 0|||||||0 > mailto:-------------------- http://www.----------.com/ > > "§qu@r3 Wh33£s" <bubonic@germ.net> wrote in message > news:H8wuh.820900$R63.18264@pd7urf1no... >> >> And which thread would that be? >> >> >> -- > > |
Re: Steering wheel lock plate
I thought I was important to the group, and I can't find it even if I think
long and hard. Assuming I am right about my self professed grandure and my intellect, then it stands to logic that anybody less important than I would have difficulty too. My guess is that the people that really are important, and smart, can't find it either. But, hey, it's probalby just me. "L.W. (Bill) ------ III" <----------@cox.net> wrote in message news:51vkt2F1jf3q4U1@mid.individual.net... > People that are unimportant to the group, probably won't be able to > think to find it. > God Bless America, Bill 0|||||||0 > mailto:-------------------- http://www.----------.com/ > > "§qu@r3 Wh33£s" <bubonic@germ.net> wrote in message > news:H8wuh.820900$R63.18264@pd7urf1no... >> >> And which thread would that be? >> >> >> -- > > |
Re: Steering wheel lock plate
I thought I was important to the group, and I can't find it even if I think
long and hard. Assuming I am right about my self professed grandure and my intellect, then it stands to logic that anybody less important than I would have difficulty too. My guess is that the people that really are important, and smart, can't find it either. But, hey, it's probalby just me. "L.W. (Bill) ------ III" <----------@cox.net> wrote in message news:51vkt2F1jf3q4U1@mid.individual.net... > People that are unimportant to the group, probably won't be able to > think to find it. > God Bless America, Bill 0|||||||0 > mailto:-------------------- http://www.----------.com/ > > "§qu@r3 Wh33£s" <bubonic@germ.net> wrote in message > news:H8wuh.820900$R63.18264@pd7urf1no... >> >> And which thread would that be? >> >> >> -- > > |
Re: Steering wheel lock plate
I for one was following the other thread so clued in right away.
I was puzzled at the OP's 'reply' to Bill's error though..... LOL! Mike Jeff Strickland wrote: > I thought I was important to the group, and I can't find it even if I > think long and hard. Assuming I am right about my self professed > grandure and my intellect, then it stands to logic that anybody less > important than I would have difficulty too. My guess is that the people > that really are important, and smart, can't find it either. But, hey, > it's probalby just me. > > > > > > "L.W. (Bill) ------ III" <----------@cox.net> wrote in message > news:51vkt2F1jf3q4U1@mid.individual.net... >> People that are unimportant to the group, probably won't be able to >> think to find it. >> God Bless America, Bill 0|||||||0 >> mailto:-------------------- http://www.----------.com/ >> >> "§qu@r3 Wh33£s" <bubonic@germ.net> wrote in message >> news:H8wuh.820900$R63.18264@pd7urf1no... >>> >>> And which thread would that be? >>> >>> >>> -- >> >> > |
Re: Steering wheel lock plate
I for one was following the other thread so clued in right away.
I was puzzled at the OP's 'reply' to Bill's error though..... LOL! Mike Jeff Strickland wrote: > I thought I was important to the group, and I can't find it even if I > think long and hard. Assuming I am right about my self professed > grandure and my intellect, then it stands to logic that anybody less > important than I would have difficulty too. My guess is that the people > that really are important, and smart, can't find it either. But, hey, > it's probalby just me. > > > > > > "L.W. (Bill) ------ III" <----------@cox.net> wrote in message > news:51vkt2F1jf3q4U1@mid.individual.net... >> People that are unimportant to the group, probably won't be able to >> think to find it. >> God Bless America, Bill 0|||||||0 >> mailto:-------------------- http://www.----------.com/ >> >> "§qu@r3 Wh33£s" <bubonic@germ.net> wrote in message >> news:H8wuh.820900$R63.18264@pd7urf1no... >>> >>> And which thread would that be? >>> >>> >>> -- >> >> > |
Re: Steering wheel lock plate
I for one was following the other thread so clued in right away.
I was puzzled at the OP's 'reply' to Bill's error though..... LOL! Mike Jeff Strickland wrote: > I thought I was important to the group, and I can't find it even if I > think long and hard. Assuming I am right about my self professed > grandure and my intellect, then it stands to logic that anybody less > important than I would have difficulty too. My guess is that the people > that really are important, and smart, can't find it either. But, hey, > it's probalby just me. > > > > > > "L.W. (Bill) ------ III" <----------@cox.net> wrote in message > news:51vkt2F1jf3q4U1@mid.individual.net... >> People that are unimportant to the group, probably won't be able to >> think to find it. >> God Bless America, Bill 0|||||||0 >> mailto:-------------------- http://www.----------.com/ >> >> "§qu@r3 Wh33£s" <bubonic@germ.net> wrote in message >> news:H8wuh.820900$R63.18264@pd7urf1no... >>> >>> And which thread would that be? >>> >>> >>> -- >> >> > |
Re: Steering wheel lock plate
I for one was following the other thread so clued in right away.
I was puzzled at the OP's 'reply' to Bill's error though..... LOL! Mike Jeff Strickland wrote: > I thought I was important to the group, and I can't find it even if I > think long and hard. Assuming I am right about my self professed > grandure and my intellect, then it stands to logic that anybody less > important than I would have difficulty too. My guess is that the people > that really are important, and smart, can't find it either. But, hey, > it's probalby just me. > > > > > > "L.W. (Bill) ------ III" <----------@cox.net> wrote in message > news:51vkt2F1jf3q4U1@mid.individual.net... >> People that are unimportant to the group, probably won't be able to >> think to find it. >> God Bless America, Bill 0|||||||0 >> mailto:-------------------- http://www.----------.com/ >> >> "§qu@r3 Wh33£s" <bubonic@germ.net> wrote in message >> news:H8wuh.820900$R63.18264@pd7urf1no... >>> >>> And which thread would that be? >>> >>> >>> -- >> >> > |
Re: Steering wheel lock plate
Maybe read what fixed "New starter continually runs"
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "Mike Romain" <romainm@sympatico.ca> wrote in message news:45baa439$0$2469$9a6e19ea@unlimited.newshostin g.com... > I for one was following the other thread so clued in right away. > > I was puzzled at the OP's 'reply' to Bill's error though..... LOL! > > Mike |
Re: Steering wheel lock plate
Maybe read what fixed "New starter continually runs"
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "Mike Romain" <romainm@sympatico.ca> wrote in message news:45baa439$0$2469$9a6e19ea@unlimited.newshostin g.com... > I for one was following the other thread so clued in right away. > > I was puzzled at the OP's 'reply' to Bill's error though..... LOL! > > Mike |
Re: Steering wheel lock plate
Maybe read what fixed "New starter continually runs"
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "Mike Romain" <romainm@sympatico.ca> wrote in message news:45baa439$0$2469$9a6e19ea@unlimited.newshostin g.com... > I for one was following the other thread so clued in right away. > > I was puzzled at the OP's 'reply' to Bill's error though..... LOL! > > Mike |
Re: Steering wheel lock plate
Maybe read what fixed "New starter continually runs"
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "Mike Romain" <romainm@sympatico.ca> wrote in message news:45baa439$0$2469$9a6e19ea@unlimited.newshostin g.com... > I for one was following the other thread so clued in right away. > > I was puzzled at the OP's 'reply' to Bill's error though..... LOL! > > Mike |
Re: Steering wheel lock plate
I likely already bored the crap out of them on that thread Bill which is
why I knew what you were talking about. Mike L.W. (Bill) ------ III wrote: > Maybe read what fixed "New starter continually runs" > God Bless America, Bill 0|||||||0 > mailto:-------------------- http://www.----------.com/ > > "Mike Romain" <romainm@sympatico.ca> wrote in message > news:45baa439$0$2469$9a6e19ea@unlimited.newshostin g.com... >> I for one was following the other thread so clued in right away. >> >> I was puzzled at the OP's 'reply' to Bill's error though..... LOL! >> >> Mike > > |
Re: Steering wheel lock plate
I likely already bored the crap out of them on that thread Bill which is
why I knew what you were talking about. Mike L.W. (Bill) ------ III wrote: > Maybe read what fixed "New starter continually runs" > God Bless America, Bill 0|||||||0 > mailto:-------------------- http://www.----------.com/ > > "Mike Romain" <romainm@sympatico.ca> wrote in message > news:45baa439$0$2469$9a6e19ea@unlimited.newshostin g.com... >> I for one was following the other thread so clued in right away. >> >> I was puzzled at the OP's 'reply' to Bill's error though..... LOL! >> >> Mike > > |
Re: Steering wheel lock plate
I likely already bored the crap out of them on that thread Bill which is
why I knew what you were talking about. Mike L.W. (Bill) ------ III wrote: > Maybe read what fixed "New starter continually runs" > God Bless America, Bill 0|||||||0 > mailto:-------------------- http://www.----------.com/ > > "Mike Romain" <romainm@sympatico.ca> wrote in message > news:45baa439$0$2469$9a6e19ea@unlimited.newshostin g.com... >> I for one was following the other thread so clued in right away. >> >> I was puzzled at the OP's 'reply' to Bill's error though..... LOL! >> >> Mike > > |
Re: Steering wheel lock plate
I likely already bored the crap out of them on that thread Bill which is
why I knew what you were talking about. Mike L.W. (Bill) ------ III wrote: > Maybe read what fixed "New starter continually runs" > God Bless America, Bill 0|||||||0 > mailto:-------------------- http://www.----------.com/ > > "Mike Romain" <romainm@sympatico.ca> wrote in message > news:45baa439$0$2469$9a6e19ea@unlimited.newshostin g.com... >> I for one was following the other thread so clued in right away. >> >> I was puzzled at the OP's 'reply' to Bill's error though..... LOL! >> >> Mike > > |
Re: Steering wheel lock plate
Sorry, I reversed what you said.
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "Mike Romain" <romainm@sympatico.ca> wrote in message news:45baa8c2$0$1963$9a6e19ea@unlimited.newshostin g.com... > I likely already bored the crap out of them on that thread Bill which is > why I knew what you were talking about. > > Mike |
Re: Steering wheel lock plate
Sorry, I reversed what you said.
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "Mike Romain" <romainm@sympatico.ca> wrote in message news:45baa8c2$0$1963$9a6e19ea@unlimited.newshostin g.com... > I likely already bored the crap out of them on that thread Bill which is > why I knew what you were talking about. > > Mike |
Re: Steering wheel lock plate
Sorry, I reversed what you said.
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "Mike Romain" <romainm@sympatico.ca> wrote in message news:45baa8c2$0$1963$9a6e19ea@unlimited.newshostin g.com... > I likely already bored the crap out of them on that thread Bill which is > why I knew what you were talking about. > > Mike |
Re: Steering wheel lock plate
Sorry, I reversed what you said.
God Bless America, Bill 0|||||||0 mailto:-------------------- http://www.----------.com/ "Mike Romain" <romainm@sympatico.ca> wrote in message news:45baa8c2$0$1963$9a6e19ea@unlimited.newshostin g.com... > I likely already bored the crap out of them on that thread Bill which is > why I knew what you were talking about. > > Mike |
Re: Steering wheel lock plate
Had that figured too. ;-)
Mike L.W. (Bill) ------ III wrote: > Sorry, I reversed what you said. > God Bless America, Bill 0|||||||0 > mailto:-------------------- http://www.----------.com/ > > "Mike Romain" <romainm@sympatico.ca> wrote in message > news:45baa8c2$0$1963$9a6e19ea@unlimited.newshostin g.com... >> I likely already bored the crap out of them on that thread Bill which is >> why I knew what you were talking about. >> >> Mike > > |
Re: Steering wheel lock plate
Had that figured too. ;-)
Mike L.W. (Bill) ------ III wrote: > Sorry, I reversed what you said. > God Bless America, Bill 0|||||||0 > mailto:-------------------- http://www.----------.com/ > > "Mike Romain" <romainm@sympatico.ca> wrote in message > news:45baa8c2$0$1963$9a6e19ea@unlimited.newshostin g.com... >> I likely already bored the crap out of them on that thread Bill which is >> why I knew what you were talking about. >> >> Mike > > |
Re: Steering wheel lock plate
Had that figured too. ;-)
Mike L.W. (Bill) ------ III wrote: > Sorry, I reversed what you said. > God Bless America, Bill 0|||||||0 > mailto:-------------------- http://www.----------.com/ > > "Mike Romain" <romainm@sympatico.ca> wrote in message > news:45baa8c2$0$1963$9a6e19ea@unlimited.newshostin g.com... >> I likely already bored the crap out of them on that thread Bill which is >> why I knew what you were talking about. >> >> Mike > > |
| All times are GMT -4. The time now is 12:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands