Re: Steering Knuckle installed and functioning!
>
> Mike, .. This is a 90-00 XJ knuckle, which looks similar to the one > I've got on my TJ.. > > http://www.jeep4x4center.com/prodinf...umber=52067576 > > It appears this is the knuckle from 84-89, that I assume you have? > > http://cgi.ebay.com/ebaymotors/Jeep-...QQcmdZViewItem > Thanks. Yup they made it all one piece, figures. Mike |
Re: Steering Knuckle installed and functioning!
>
> Mike, .. This is a 90-00 XJ knuckle, which looks similar to the one > I've got on my TJ.. > > http://www.jeep4x4center.com/prodinf...umber=52067576 > > It appears this is the knuckle from 84-89, that I assume you have? > > http://cgi.ebay.com/ebaymotors/Jeep-...QQcmdZViewItem > Thanks. Yup they made it all one piece, figures. Mike |
Re: Steering Knuckle installed and functioning!
On Feb 23, 2:02 pm, Mike Romain <roma...@sympatico.ca> wrote:
> > Mike, .. This is a 90-00 XJ knuckle, which looks similar to the one > > I've got on my TJ.. > > >http://www.jeep4x4center.com/prodinf...umber=52067576 > > > It appears this is the knuckle from 84-89, that I assume you have? > > >http://cgi.ebay.com/ebaymotors/Jeep-...r-Drivers-Left... > > Thanks. Yup they made it all one piece, figures. > > Mike And this now pisses me off too, because I didn't even think about the possibility of my brake pads getting hung up on those grooves. . . .Something tells me I'm going to be repeating this same damned job soon, so I can weld and grind those grooves flat. Damn. |
Re: Steering Knuckle installed and functioning!
On Feb 23, 2:02 pm, Mike Romain <roma...@sympatico.ca> wrote:
> > Mike, .. This is a 90-00 XJ knuckle, which looks similar to the one > > I've got on my TJ.. > > >http://www.jeep4x4center.com/prodinf...umber=52067576 > > > It appears this is the knuckle from 84-89, that I assume you have? > > >http://cgi.ebay.com/ebaymotors/Jeep-...r-Drivers-Left... > > Thanks. Yup they made it all one piece, figures. > > Mike And this now pisses me off too, because I didn't even think about the possibility of my brake pads getting hung up on those grooves. . . .Something tells me I'm going to be repeating this same damned job soon, so I can weld and grind those grooves flat. Damn. |
Re: Steering Knuckle installed and functioning!
On Feb 23, 2:02 pm, Mike Romain <roma...@sympatico.ca> wrote:
> > Mike, .. This is a 90-00 XJ knuckle, which looks similar to the one > > I've got on my TJ.. > > >http://www.jeep4x4center.com/prodinf...umber=52067576 > > > It appears this is the knuckle from 84-89, that I assume you have? > > >http://cgi.ebay.com/ebaymotors/Jeep-...r-Drivers-Left... > > Thanks. Yup they made it all one piece, figures. > > Mike And this now pisses me off too, because I didn't even think about the possibility of my brake pads getting hung up on those grooves. . . .Something tells me I'm going to be repeating this same damned job soon, so I can weld and grind those grooves flat. Damn. |
Re: Steering Knuckle installed and functioning!
Dave wrote:
> On Feb 23, 2:02 pm, Mike Romain <roma...@sympatico.ca> wrote: >>> Mike, .. This is a 90-00 XJ knuckle, which looks similar to the one >>> I've got on my TJ.. >>> http://www.jeep4x4center.com/prodinf...umber=52067576 >>> It appears this is the knuckle from 84-89, that I assume you have? >>> http://cgi.ebay.com/ebaymotors/Jeep-...r-Drivers-Left... >> Thanks. Yup they made it all one piece, figures. >> >> Mike > > And this now pisses me off too, because I didn't even think about the > possibility of my brake pads getting hung up on those > grooves. . . .Something tells me I'm going to be repeating this same > damned job soon, so I can weld and grind those grooves flat. > > Damn. > The notch in ours somehow managed to heat one pad or do something to it because it literally exploded on a highway corner as we are heading off into the bush for 2 weeks. The pad had shattered. Here is a photo: http://www.imagestation.com/album/pi...?id=4290636987 Another Jeeper we didn't know stopped and took us home to see if he had a spare pad and when he didn't took me to a town about 30 miles away so we could get a set, then he drove me back to the Cherokee so I could put them on. Got the slide fixed soon after. Mike |
Re: Steering Knuckle installed and functioning!
Dave wrote:
> On Feb 23, 2:02 pm, Mike Romain <roma...@sympatico.ca> wrote: >>> Mike, .. This is a 90-00 XJ knuckle, which looks similar to the one >>> I've got on my TJ.. >>> http://www.jeep4x4center.com/prodinf...umber=52067576 >>> It appears this is the knuckle from 84-89, that I assume you have? >>> http://cgi.ebay.com/ebaymotors/Jeep-...r-Drivers-Left... >> Thanks. Yup they made it all one piece, figures. >> >> Mike > > And this now pisses me off too, because I didn't even think about the > possibility of my brake pads getting hung up on those > grooves. . . .Something tells me I'm going to be repeating this same > damned job soon, so I can weld and grind those grooves flat. > > Damn. > The notch in ours somehow managed to heat one pad or do something to it because it literally exploded on a highway corner as we are heading off into the bush for 2 weeks. The pad had shattered. Here is a photo: http://www.imagestation.com/album/pi...?id=4290636987 Another Jeeper we didn't know stopped and took us home to see if he had a spare pad and when he didn't took me to a town about 30 miles away so we could get a set, then he drove me back to the Cherokee so I could put them on. Got the slide fixed soon after. Mike |
Re: Steering Knuckle installed and functioning!
Dave wrote:
> On Feb 23, 2:02 pm, Mike Romain <roma...@sympatico.ca> wrote: >>> Mike, .. This is a 90-00 XJ knuckle, which looks similar to the one >>> I've got on my TJ.. >>> http://www.jeep4x4center.com/prodinf...umber=52067576 >>> It appears this is the knuckle from 84-89, that I assume you have? >>> http://cgi.ebay.com/ebaymotors/Jeep-...r-Drivers-Left... >> Thanks. Yup they made it all one piece, figures. >> >> Mike > > And this now pisses me off too, because I didn't even think about the > possibility of my brake pads getting hung up on those > grooves. . . .Something tells me I'm going to be repeating this same > damned job soon, so I can weld and grind those grooves flat. > > Damn. > The notch in ours somehow managed to heat one pad or do something to it because it literally exploded on a highway corner as we are heading off into the bush for 2 weeks. The pad had shattered. Here is a photo: http://www.imagestation.com/album/pi...?id=4290636987 Another Jeeper we didn't know stopped and took us home to see if he had a spare pad and when he didn't took me to a town about 30 miles away so we could get a set, then he drove me back to the Cherokee so I could put them on. Got the slide fixed soon after. Mike |
Re: Steering Knuckle installed and functioning!
On Feb 23, 2:48 pm, Mike Romain <roma...@sympatico.ca> wrote:
> Dave wrote: > > On Feb 23, 2:02 pm, Mike Romain <roma...@sympatico.ca> wrote: > >>> Mike, .. This is a 90-00 XJ knuckle, which looks similar to the one > >>> I've got on my TJ.. > >>>http://www.jeep4x4center.com/prodinf...umber=52067576 > >>> It appears this is the knuckle from 84-89, that I assume you have? > >>>http://cgi.ebay.com/ebaymotors/Jeep-...r-Drivers-Left... > >> Thanks. Yup they made it all one piece, figures. > > >> Mike > > > And this now pisses me off too, because I didn't even think about the > > possibility of my brake pads getting hung up on those > > grooves. . . .Something tells me I'm going to be repeating this same > > damned job soon, so I can weld and grind those grooves flat. > > > Damn. > > The notch in ours somehow managed to heat one pad or do something to it > because it literally exploded on a highway corner as we are heading off > into the bush for 2 weeks. The pad had shattered. Here is a photo:http://www.imagestation.com/album/pi...?id=4290636987 > > Another Jeeper we didn't know stopped and took us home to see if he had > a spare pad and when he didn't took me to a town about 30 miles away so > we could get a set, then he drove me back to the Cherokee so I could put > them on. > > Got the slide fixed soon after. > > Mike Thats awesome. Its great to hear stories of people who are genuinely nice. I've heard similar stories of brand-camaraderie when I used to peruse the Aircooled VW newsgroup, rec.autos.makers.vw.aircooled (RAMVA as they call it) .. my favorite was a guy who drove a Type I (beetle) and he saw another beetle pulled over on the highway, so he stopped. It was 3 young college girls whom he was more than willing to give a ride to :) |
Re: Steering Knuckle installed and functioning!
On Feb 23, 2:48 pm, Mike Romain <roma...@sympatico.ca> wrote:
> Dave wrote: > > On Feb 23, 2:02 pm, Mike Romain <roma...@sympatico.ca> wrote: > >>> Mike, .. This is a 90-00 XJ knuckle, which looks similar to the one > >>> I've got on my TJ.. > >>>http://www.jeep4x4center.com/prodinf...umber=52067576 > >>> It appears this is the knuckle from 84-89, that I assume you have? > >>>http://cgi.ebay.com/ebaymotors/Jeep-...r-Drivers-Left... > >> Thanks. Yup they made it all one piece, figures. > > >> Mike > > > And this now pisses me off too, because I didn't even think about the > > possibility of my brake pads getting hung up on those > > grooves. . . .Something tells me I'm going to be repeating this same > > damned job soon, so I can weld and grind those grooves flat. > > > Damn. > > The notch in ours somehow managed to heat one pad or do something to it > because it literally exploded on a highway corner as we are heading off > into the bush for 2 weeks. The pad had shattered. Here is a photo:http://www.imagestation.com/album/pi...?id=4290636987 > > Another Jeeper we didn't know stopped and took us home to see if he had > a spare pad and when he didn't took me to a town about 30 miles away so > we could get a set, then he drove me back to the Cherokee so I could put > them on. > > Got the slide fixed soon after. > > Mike Thats awesome. Its great to hear stories of people who are genuinely nice. I've heard similar stories of brand-camaraderie when I used to peruse the Aircooled VW newsgroup, rec.autos.makers.vw.aircooled (RAMVA as they call it) .. my favorite was a guy who drove a Type I (beetle) and he saw another beetle pulled over on the highway, so he stopped. It was 3 young college girls whom he was more than willing to give a ride to :) |
All times are GMT -4. The time now is 11:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands