Skyjacker 2" lift installation..
 

My 2" for the 89 XJ should be here any day. It's got rear add-a-leafs, hydro
shocks all the way around, front sway bar bushings, steering stabilizer,
front coil spacers, sway bar disconnects, and a couple other little things.

Is it safe to lift the rear one day, install the sway bar bushings and
steering stabilizer the next day, and then finish the following day with the
front spacers and disconnects? I'll be driving approximately 40 miles a day
(round trip) to work. I do plan to get an alignment shortly after finishing
the lift.

How long should everything take a beginner to install? I've done
struts/springs on cars before, but never an add-a-leaf. I'm pretty sure I'll
need to rent a spring compressor for the front spacer installation... any
special tools or things to look out for overall?

Where can I get new coil spring isolators?

Thanks,

Carl

Re: Skyjacker 2" lift installation..
 

Hey Carl,
First off, it's not a big deal to do the rear, drive it and then do the
front. You may want to arrange alternate transportation in advance however.
It never fails, if you NEED the vehicle, something will prevent you from
completing the task in time. Count on breaking upper rear shock bolts. I
would recommend new u-bolts. The rear should take about 3-4 hours if nothing
goes wrong (doubt it). The front should be fairly easy but time consuming,
maybe 3-4 hours as well. Be sure to relocate your hard brake lines in the
front. You can straighten them out carefully and drill/tap a new hole for
the hold down. To remove the front springs, use a McPherson Strut spring
compressor. These hold the spring from the outside, regular coil spring
compressors go on the inside. Most places have free loan-a-tool programs
when you leave a deposit. Don't worry about new isolators unless yours are
torn.
-Brian

"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:4206ddb7$1_5@newsfeed.slurp.net...
> My 2" for the 89 XJ should be here any day. It's got rear add-a-leafs,
> hydro
> shocks all the way around, front sway bar bushings, steering stabilizer,
> front coil spacers, sway bar disconnects, and a couple other little
> things.
>
> Is it safe to lift the rear one day, install the sway bar bushings and
> steering stabilizer the next day, and then finish the following day with
> the
> front spacers and disconnects? I'll be driving approximately 40 miles a
> day
> (round trip) to work. I do plan to get an alignment shortly after
> finishing
> the lift.
>
> How long should everything take a beginner to install? I've done
> struts/springs on cars before, but never an add-a-leaf. I'm pretty sure
> I'll
> need to rent a spring compressor for the front spacer installation... any
> special tools or things to look out for overall?
>
> Where can I get new coil spring isolators?
>
> Thanks,
>
> Carl
>
>

Re: Skyjacker 2" lift installation..
 

Hey Carl,
First off, it's not a big deal to do the rear, drive it and then do the
front. You may want to arrange alternate transportation in advance however.
It never fails, if you NEED the vehicle, something will prevent you from
completing the task in time. Count on breaking upper rear shock bolts. I
would recommend new u-bolts. The rear should take about 3-4 hours if nothing
goes wrong (doubt it). The front should be fairly easy but time consuming,
maybe 3-4 hours as well. Be sure to relocate your hard brake lines in the
front. You can straighten them out carefully and drill/tap a new hole for
the hold down. To remove the front springs, use a McPherson Strut spring
compressor. These hold the spring from the outside, regular coil spring
compressors go on the inside. Most places have free loan-a-tool programs
when you leave a deposit. Don't worry about new isolators unless yours are
torn.
-Brian

"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:4206ddb7$1_5@newsfeed.slurp.net...
> My 2" for the 89 XJ should be here any day. It's got rear add-a-leafs,
> hydro
> shocks all the way around, front sway bar bushings, steering stabilizer,
> front coil spacers, sway bar disconnects, and a couple other little
> things.
>
> Is it safe to lift the rear one day, install the sway bar bushings and
> steering stabilizer the next day, and then finish the following day with
> the
> front spacers and disconnects? I'll be driving approximately 40 miles a
> day
> (round trip) to work. I do plan to get an alignment shortly after
> finishing
> the lift.
>
> How long should everything take a beginner to install? I've done
> struts/springs on cars before, but never an add-a-leaf. I'm pretty sure
> I'll
> need to rent a spring compressor for the front spacer installation... any
> special tools or things to look out for overall?
>
> Where can I get new coil spring isolators?
>
> Thanks,
>
> Carl
>
>

Re: Skyjacker 2" lift installation..
 

Hey Carl,
First off, it's not a big deal to do the rear, drive it and then do the
front. You may want to arrange alternate transportation in advance however.
It never fails, if you NEED the vehicle, something will prevent you from
completing the task in time. Count on breaking upper rear shock bolts. I
would recommend new u-bolts. The rear should take about 3-4 hours if nothing
goes wrong (doubt it). The front should be fairly easy but time consuming,
maybe 3-4 hours as well. Be sure to relocate your hard brake lines in the
front. You can straighten them out carefully and drill/tap a new hole for
the hold down. To remove the front springs, use a McPherson Strut spring
compressor. These hold the spring from the outside, regular coil spring
compressors go on the inside. Most places have free loan-a-tool programs
when you leave a deposit. Don't worry about new isolators unless yours are
torn.
-Brian

"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:4206ddb7$1_5@newsfeed.slurp.net...
> My 2" for the 89 XJ should be here any day. It's got rear add-a-leafs,
> hydro
> shocks all the way around, front sway bar bushings, steering stabilizer,
> front coil spacers, sway bar disconnects, and a couple other little
> things.
>
> Is it safe to lift the rear one day, install the sway bar bushings and
> steering stabilizer the next day, and then finish the following day with
> the
> front spacers and disconnects? I'll be driving approximately 40 miles a
> day
> (round trip) to work. I do plan to get an alignment shortly after
> finishing
> the lift.
>
> How long should everything take a beginner to install? I've done
> struts/springs on cars before, but never an add-a-leaf. I'm pretty sure
> I'll
> need to rent a spring compressor for the front spacer installation... any
> special tools or things to look out for overall?
>
> Where can I get new coil spring isolators?
>
> Thanks,
>
> Carl
>
>