Re: Shipping T/C advice
I got 120lb of skid plates flown over from PA to here for 118 bucks in 7
days - not bad at all !! That was BAX Global. Dave Milne, Scotland '99 TJ 4.0 Sahara "c" <c@me.org> wrote in message news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com... : If he takes it to a shipping store, he'd be much further ahead to throw it : out in the street. They will bend you over on shipping something like that. : You might want to look into truck freight on it since it is already crated. : I recently shipped a grinding machine from Michigan to Oregon. The weight : was over 250 pounds and total shipping cost was $64. It took 6 days to : deliver which is actually faster than a UPS package will get there. : : Chris : : "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message : news:1zBnb.122922$gv5.108399@fed1read05... : > I hope you are selling it for a bunch. Hehe. All those hours of packaging! : > What if you take it to a postal store and have them deal with it. : > KH : > : > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message : > news:ctBnb.1021$Aa6.33506@news.uswest.net... : > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate : > for : > > it, and never being one to under-build something..... the crate weighs : 63 : > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's : > ground : > > limit. What can I use to ship it that weighs less? : > > : > > The crate I made was 20 X 22 X 30. The new one can be at least 2 inches : > > shorter on each side. 18 X 20 X 26 would probably do it. Are there any : > > containers anybody can think of that meet these dimensions and could : hold : > a : > > 108 lb T/C and don't weigh over say 40 pounds ?? : > > : > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had : > around : > > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic : > > container of some kind be able to do the job? : > > : > > : > : > : : |
Re: Shipping T/C advice
I got 120lb of skid plates flown over from PA to here for 118 bucks in 7
days - not bad at all !! That was BAX Global. Dave Milne, Scotland '99 TJ 4.0 Sahara "c" <c@me.org> wrote in message news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com... : If he takes it to a shipping store, he'd be much further ahead to throw it : out in the street. They will bend you over on shipping something like that. : You might want to look into truck freight on it since it is already crated. : I recently shipped a grinding machine from Michigan to Oregon. The weight : was over 250 pounds and total shipping cost was $64. It took 6 days to : deliver which is actually faster than a UPS package will get there. : : Chris : : "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message : news:1zBnb.122922$gv5.108399@fed1read05... : > I hope you are selling it for a bunch. Hehe. All those hours of packaging! : > What if you take it to a postal store and have them deal with it. : > KH : > : > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message : > news:ctBnb.1021$Aa6.33506@news.uswest.net... : > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate : > for : > > it, and never being one to under-build something..... the crate weighs : 63 : > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's : > ground : > > limit. What can I use to ship it that weighs less? : > > : > > The crate I made was 20 X 22 X 30. The new one can be at least 2 inches : > > shorter on each side. 18 X 20 X 26 would probably do it. Are there any : > > containers anybody can think of that meet these dimensions and could : hold : > a : > > 108 lb T/C and don't weigh over say 40 pounds ?? : > > : > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had : > around : > > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic : > > container of some kind be able to do the job? : > > : > > : > : > : : |
Re: Shipping T/C advice
That's why I suggested the trucking firms. They don't require any special
palleting or crating, unless the item can't be unloaded without a forklift. I would check into it, you may be surprised at the cost. Chris "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message news:w1Dnb.1064$PV2.87015@news.uswest.net... > He is paying shipping, but if I have to spend 18 hours crating and shipping > the thing... I'll just donate it to someone locally! > > "c" <c@me.org> wrote in message > news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com... > > If he takes it to a shipping store, he'd be much further ahead to throw it > > out in the street. They will bend you over on shipping something like > that. > > You might want to look into truck freight on it since it is already > crated. > > I recently shipped a grinding machine from Michigan to Oregon. The weight > > was over 250 pounds and total shipping cost was $64. It took 6 days to > > deliver which is actually faster than a UPS package will get there. > > > > Chris > > > > "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message > > news:1zBnb.122922$gv5.108399@fed1read05... > > > I hope you are selling it for a bunch. Hehe. All those hours of > packaging! > > > What if you take it to a postal store and have them deal with it. > > > KH > > > > > > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message > > > news:ctBnb.1021$Aa6.33506@news.uswest.net... > > > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a > crate > > > for > > > > it, and never being one to under-build something..... the crate weighs > > 63 > > > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's > > > ground > > > > limit. What can I use to ship it that weighs less? > > > > > > > > The crate I made was 20 X 22 X 30. The new one can be at least 2 > inches > > > > shorter on each side. 18 X 20 X 26 would probably do it. Are there > any > > > > containers anybody can think of that meet these dimensions and could > > hold > > > a > > > > 108 lb T/C and don't weigh over say 40 pounds ?? > > > > > > > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had > > > around > > > > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic > > > > container of some kind be able to do the job? > > > > > > > > > > > > > > > > > > > > |
Re: Shipping T/C advice
That's why I suggested the trucking firms. They don't require any special
palleting or crating, unless the item can't be unloaded without a forklift. I would check into it, you may be surprised at the cost. Chris "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message news:w1Dnb.1064$PV2.87015@news.uswest.net... > He is paying shipping, but if I have to spend 18 hours crating and shipping > the thing... I'll just donate it to someone locally! > > "c" <c@me.org> wrote in message > news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com... > > If he takes it to a shipping store, he'd be much further ahead to throw it > > out in the street. They will bend you over on shipping something like > that. > > You might want to look into truck freight on it since it is already > crated. > > I recently shipped a grinding machine from Michigan to Oregon. The weight > > was over 250 pounds and total shipping cost was $64. It took 6 days to > > deliver which is actually faster than a UPS package will get there. > > > > Chris > > > > "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message > > news:1zBnb.122922$gv5.108399@fed1read05... > > > I hope you are selling it for a bunch. Hehe. All those hours of > packaging! > > > What if you take it to a postal store and have them deal with it. > > > KH > > > > > > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message > > > news:ctBnb.1021$Aa6.33506@news.uswest.net... > > > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a > crate > > > for > > > > it, and never being one to under-build something..... the crate weighs > > 63 > > > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's > > > ground > > > > limit. What can I use to ship it that weighs less? > > > > > > > > The crate I made was 20 X 22 X 30. The new one can be at least 2 > inches > > > > shorter on each side. 18 X 20 X 26 would probably do it. Are there > any > > > > containers anybody can think of that meet these dimensions and could > > hold > > > a > > > > 108 lb T/C and don't weigh over say 40 pounds ?? > > > > > > > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had > > > around > > > > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic > > > > container of some kind be able to do the job? > > > > > > > > > > > > > > > > > > > > |
Re: Shipping T/C advice
That's why I suggested the trucking firms. They don't require any special
palleting or crating, unless the item can't be unloaded without a forklift. I would check into it, you may be surprised at the cost. Chris "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message news:w1Dnb.1064$PV2.87015@news.uswest.net... > He is paying shipping, but if I have to spend 18 hours crating and shipping > the thing... I'll just donate it to someone locally! > > "c" <c@me.org> wrote in message > news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com... > > If he takes it to a shipping store, he'd be much further ahead to throw it > > out in the street. They will bend you over on shipping something like > that. > > You might want to look into truck freight on it since it is already > crated. > > I recently shipped a grinding machine from Michigan to Oregon. The weight > > was over 250 pounds and total shipping cost was $64. It took 6 days to > > deliver which is actually faster than a UPS package will get there. > > > > Chris > > > > "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message > > news:1zBnb.122922$gv5.108399@fed1read05... > > > I hope you are selling it for a bunch. Hehe. All those hours of > packaging! > > > What if you take it to a postal store and have them deal with it. > > > KH > > > > > > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message > > > news:ctBnb.1021$Aa6.33506@news.uswest.net... > > > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a > crate > > > for > > > > it, and never being one to under-build something..... the crate weighs > > 63 > > > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's > > > ground > > > > limit. What can I use to ship it that weighs less? > > > > > > > > The crate I made was 20 X 22 X 30. The new one can be at least 2 > inches > > > > shorter on each side. 18 X 20 X 26 would probably do it. Are there > any > > > > containers anybody can think of that meet these dimensions and could > > hold > > > a > > > > 108 lb T/C and don't weigh over say 40 pounds ?? > > > > > > > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had > > > around > > > > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic > > > > container of some kind be able to do the job? > > > > > > > > > > > > > > > > > > > > |
Re: Shipping T/C advice
Tupperware!
Stop the laughing, seriously crate it up in one of those large tupperware containers that have the snapclose lids, and throughly pack it in place with a combination of cardboard, and newspaper, then tape the lid on securely with 1000 mile an hour black gaffer type tape, and slap a shipping label on it. Of course first check with your shipping company if they will take this. It shouldnt add more than about 5lbs to the package. "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message news:ctBnb.1021$Aa6.33506@news.uswest.net... > I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate for > it, and never being one to under-build something..... the crate weighs 63 > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's ground > limit. What can I use to ship it that weighs less? > > The crate I made was 20 X 22 X 30. The new one can be at least 2 inches > shorter on each side. 18 X 20 X 26 would probably do it. Are there any > containers anybody can think of that meet these dimensions and could hold a > 108 lb T/C and don't weigh over say 40 pounds ?? > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had around > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic > container of some kind be able to do the job? > > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003 |
Re: Shipping T/C advice
Tupperware!
Stop the laughing, seriously crate it up in one of those large tupperware containers that have the snapclose lids, and throughly pack it in place with a combination of cardboard, and newspaper, then tape the lid on securely with 1000 mile an hour black gaffer type tape, and slap a shipping label on it. Of course first check with your shipping company if they will take this. It shouldnt add more than about 5lbs to the package. "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message news:ctBnb.1021$Aa6.33506@news.uswest.net... > I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate for > it, and never being one to under-build something..... the crate weighs 63 > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's ground > limit. What can I use to ship it that weighs less? > > The crate I made was 20 X 22 X 30. The new one can be at least 2 inches > shorter on each side. 18 X 20 X 26 would probably do it. Are there any > containers anybody can think of that meet these dimensions and could hold a > 108 lb T/C and don't weigh over say 40 pounds ?? > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had around > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic > container of some kind be able to do the job? > > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003 |
Re: Shipping T/C advice
Tupperware!
Stop the laughing, seriously crate it up in one of those large tupperware containers that have the snapclose lids, and throughly pack it in place with a combination of cardboard, and newspaper, then tape the lid on securely with 1000 mile an hour black gaffer type tape, and slap a shipping label on it. Of course first check with your shipping company if they will take this. It shouldnt add more than about 5lbs to the package. "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message news:ctBnb.1021$Aa6.33506@news.uswest.net... > I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate for > it, and never being one to under-build something..... the crate weighs 63 > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's ground > limit. What can I use to ship it that weighs less? > > The crate I made was 20 X 22 X 30. The new one can be at least 2 inches > shorter on each side. 18 X 20 X 26 would probably do it. Are there any > containers anybody can think of that meet these dimensions and could hold a > 108 lb T/C and don't weigh over say 40 pounds ?? > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had around > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic > container of some kind be able to do the job? > > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003 |
Oh yeah....
Oh yeah, if you get the right container it will probably have handles on it
too for the driver to lift it with should he need to. I store over a hundred lbs of dog food in one, and regularly pick it up and move it around the house without it collapsing. "GamePlayer No. 1058" <nospamreader@yahoo.com> wrote in message news:bnmvtv$12tcm7$1@ID-194553.news.uni-berlin.de... > Tupperware! > > Stop the laughing, seriously crate it up in one of those large tupperware > containers that have the snapclose lids, and throughly pack it in place with > a combination of cardboard, and newspaper, then tape the lid on securely > with 1000 mile an hour black gaffer type tape, and slap a shipping label on > it. > > Of course first check with your shipping company if they will take this. It > shouldnt add more than about 5lbs to the package. > > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message > news:ctBnb.1021$Aa6.33506@news.uswest.net... > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate > for > > it, and never being one to under-build something..... the crate weighs 63 > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's > ground > > limit. What can I use to ship it that weighs less? > > > > The crate I made was 20 X 22 X 30. The new one can be at least 2 inches > > shorter on each side. 18 X 20 X 26 would probably do it. Are there any > > containers anybody can think of that meet these dimensions and could hold > a > > 108 lb T/C and don't weigh over say 40 pounds ?? > > > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had > around > > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic > > container of some kind be able to do the job? > > > > > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003 > > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003 |
Oh yeah....
Oh yeah, if you get the right container it will probably have handles on it
too for the driver to lift it with should he need to. I store over a hundred lbs of dog food in one, and regularly pick it up and move it around the house without it collapsing. "GamePlayer No. 1058" <nospamreader@yahoo.com> wrote in message news:bnmvtv$12tcm7$1@ID-194553.news.uni-berlin.de... > Tupperware! > > Stop the laughing, seriously crate it up in one of those large tupperware > containers that have the snapclose lids, and throughly pack it in place with > a combination of cardboard, and newspaper, then tape the lid on securely > with 1000 mile an hour black gaffer type tape, and slap a shipping label on > it. > > Of course first check with your shipping company if they will take this. It > shouldnt add more than about 5lbs to the package. > > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message > news:ctBnb.1021$Aa6.33506@news.uswest.net... > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate > for > > it, and never being one to under-build something..... the crate weighs 63 > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's > ground > > limit. What can I use to ship it that weighs less? > > > > The crate I made was 20 X 22 X 30. The new one can be at least 2 inches > > shorter on each side. 18 X 20 X 26 would probably do it. Are there any > > containers anybody can think of that meet these dimensions and could hold > a > > 108 lb T/C and don't weigh over say 40 pounds ?? > > > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had > around > > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic > > container of some kind be able to do the job? > > > > > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003 > > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003 |
All times are GMT -4. The time now is 03:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands