Re: Scrambler soft top instructions.
 

Tom Greening wrote:
>
> Mike Romain wrote:
> > What make is the top? It might be a Witco like the CJ7's, if so I can
> > give you directions/photos and might even be able to find the setup
> > measurements for the windshield rake and snaps.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
>
> Actually I have no clue Mike. It was with the scrambler when I bought
> it, but I never got around to installing it. It's a snap style so I'm
> guessing it's of older design, but not factory original. I can't
> imagine it would be in such good shape if it was factory. I'm getting
> ready to put the scrambler up for sale and I'd really like to have the
> soft top functional to go along with the half hard top. If you can
> point me to the pics/instructions I can probably figure out pretty quick
> if it applies to what I have or not. Thanks for the help on this.

If it is a Witco, the name will be molded onto the window corners. I am
still running with my stock original 1986 Witco soft top. I will have
to dig around for the instruction sheet and have a digital camera, but
it would be a waste of time if it isn't the same.

If it is aftermarket, the main top bows would likely mount in the same
place, but the snaps could be way off. Does it have a channel for the
top of the windshield and soft doors too?

Mike

Re: Scrambler soft top instructions.
 

Tom Greening wrote:
>
> Mike Romain wrote:
> > What make is the top? It might be a Witco like the CJ7's, if so I can
> > give you directions/photos and might even be able to find the setup
> > measurements for the windshield rake and snaps.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
>
> Actually I have no clue Mike. It was with the scrambler when I bought
> it, but I never got around to installing it. It's a snap style so I'm
> guessing it's of older design, but not factory original. I can't
> imagine it would be in such good shape if it was factory. I'm getting
> ready to put the scrambler up for sale and I'd really like to have the
> soft top functional to go along with the half hard top. If you can
> point me to the pics/instructions I can probably figure out pretty quick
> if it applies to what I have or not. Thanks for the help on this.

If it is a Witco, the name will be molded onto the window corners. I am
still running with my stock original 1986 Witco soft top. I will have
to dig around for the instruction sheet and have a digital camera, but
it would be a waste of time if it isn't the same.

If it is aftermarket, the main top bows would likely mount in the same
place, but the snaps could be way off. Does it have a channel for the
top of the windshield and soft doors too?

Mike

Re: Scrambler soft top instructions.
 

Tom Greening wrote:
>
> Mike Romain wrote:
> > What make is the top? It might be a Witco like the CJ7's, if so I can
> > give you directions/photos and might even be able to find the setup
> > measurements for the windshield rake and snaps.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
>
> Actually I have no clue Mike. It was with the scrambler when I bought
> it, but I never got around to installing it. It's a snap style so I'm
> guessing it's of older design, but not factory original. I can't
> imagine it would be in such good shape if it was factory. I'm getting
> ready to put the scrambler up for sale and I'd really like to have the
> soft top functional to go along with the half hard top. If you can
> point me to the pics/instructions I can probably figure out pretty quick
> if it applies to what I have or not. Thanks for the help on this.

If it is a Witco, the name will be molded onto the window corners. I am
still running with my stock original 1986 Witco soft top. I will have
to dig around for the instruction sheet and have a digital camera, but
it would be a waste of time if it isn't the same.

If it is aftermarket, the main top bows would likely mount in the same
place, but the snaps could be way off. Does it have a channel for the
top of the windshield and soft doors too?

Mike