Safe cruising RPM for 304 V8?
Just curious. I drive my Jeep to work and do 65-70 mph on the way in.
31" tires, not sure of the gearing in the differentials yet (gonna look this weekend), 3 speed, 304. I'm really only guessing at my speed right now because the speedo acts crazy...like it works at first but then it sort of "slows down"...but not always. Just bizarre. I have a problem with the connection at the xfer case end that I haven't gotten around to fixing yet. Anyway, assuming my tach is working correctly, what would you guys consider to be a "safe" crusing RPM for my 304? 2000 RPM? 2500 RPM? 3000 RPM? I appear to be (if I can trust the aftermarket gauge) running around 190 degrees but have seen it climb to as high as 205 on the 3 1/2 hour trip home the day I bought it. Thanks for your input. -- Travis http://jeepadventures.dyndns.org/jeep.html The meek shall inherit the earth. After I'm finished with it. :wq! |
Re: Safe cruising RPM for 304 V8?
Hi Travis,
Ideally, IMHO a Jeep's cruising RPM should be about 2500. SMOG cars usually are at about two grand, but I'm usually geared like a Hot Rod, and my engines are turning between three and four grand at sixty miles an hour, so I'm really screaming traveling at traffic speed. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ travis wrote: > > Just curious. I drive my Jeep to work and do 65-70 mph on the way in. > 31" tires, not sure of the gearing in the differentials yet (gonna > look this weekend), 3 speed, 304. I'm really only guessing at my > speed right now because the speedo acts crazy...like it works at first > but then it sort of "slows down"...but not always. Just bizarre. I > have a problem with the connection at the xfer case end that I haven't > gotten around to fixing yet. Anyway, assuming my tach is working > correctly, what would you guys consider to be a "safe" crusing RPM for > my 304? 2000 RPM? 2500 RPM? 3000 RPM? I appear to be (if I can > trust the aftermarket gauge) running around 190 degrees but have seen > it climb to as high as 205 on the 3 1/2 hour trip home the day I > bought it. Thanks for your input. > > -- > Travis > http://jeepadventures.dyndns.org/jeep.html > The meek shall inherit the earth. After I'm finished with it. > :wq! |
Re: Safe cruising RPM for 304 V8?
Hi Travis,
Ideally, IMHO a Jeep's cruising RPM should be about 2500. SMOG cars usually are at about two grand, but I'm usually geared like a Hot Rod, and my engines are turning between three and four grand at sixty miles an hour, so I'm really screaming traveling at traffic speed. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ travis wrote: > > Just curious. I drive my Jeep to work and do 65-70 mph on the way in. > 31" tires, not sure of the gearing in the differentials yet (gonna > look this weekend), 3 speed, 304. I'm really only guessing at my > speed right now because the speedo acts crazy...like it works at first > but then it sort of "slows down"...but not always. Just bizarre. I > have a problem with the connection at the xfer case end that I haven't > gotten around to fixing yet. Anyway, assuming my tach is working > correctly, what would you guys consider to be a "safe" crusing RPM for > my 304? 2000 RPM? 2500 RPM? 3000 RPM? I appear to be (if I can > trust the aftermarket gauge) running around 190 degrees but have seen > it climb to as high as 205 on the 3 1/2 hour trip home the day I > bought it. Thanks for your input. > > -- > Travis > http://jeepadventures.dyndns.org/jeep.html > The meek shall inherit the earth. After I'm finished with it. > :wq! |
Re: Safe cruising RPM for 304 V8?
Hi Travis,
Ideally, IMHO a Jeep's cruising RPM should be about 2500. SMOG cars usually are at about two grand, but I'm usually geared like a Hot Rod, and my engines are turning between three and four grand at sixty miles an hour, so I'm really screaming traveling at traffic speed. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ travis wrote: > > Just curious. I drive my Jeep to work and do 65-70 mph on the way in. > 31" tires, not sure of the gearing in the differentials yet (gonna > look this weekend), 3 speed, 304. I'm really only guessing at my > speed right now because the speedo acts crazy...like it works at first > but then it sort of "slows down"...but not always. Just bizarre. I > have a problem with the connection at the xfer case end that I haven't > gotten around to fixing yet. Anyway, assuming my tach is working > correctly, what would you guys consider to be a "safe" crusing RPM for > my 304? 2000 RPM? 2500 RPM? 3000 RPM? I appear to be (if I can > trust the aftermarket gauge) running around 190 degrees but have seen > it climb to as high as 205 on the 3 1/2 hour trip home the day I > bought it. Thanks for your input. > > -- > Travis > http://jeepadventures.dyndns.org/jeep.html > The meek shall inherit the earth. After I'm finished with it. > :wq! |
All times are GMT -4. The time now is 03:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands