Re: Rubicon Front Locker
 

Sometimes it takes 30 or 40 seconds to lock-in on my Rubi. I found that if
you push the axle lock button to lock the axles, then move forward a few
feet, then backward a few feet, they usually lock right away.

Tom

"Don Hamilton" <cdhamil@excite.com> wrote in message
news:12i8c1qahqri473@corp.supernews.com...
> Low range. It just keeps flashing will not lock in.
>
>
>
> "Matt Macchiarolo" <matt@nospamplease.com> wrote in message
> news:U_adnen9SpgOcr7YnZ2dnUVZ_sSdnZ2d@comcast.com. ..
> > Are you in low or high range?
> >
> > "Don Hamilton" <cdhamil@excite.com> wrote in message
> > news:12i739u4oks8o72@corp.supernews.com...
> >>I just purchased a 2005 Jeep Rubicon Unlimited and when I push the
button
> >>to lock the wheels the rears quit flashing for full lock but the fronts
> >>continue to flash only. I was in some sandy dirt and when cornering the
> >>front would occasionally also stop flashing momentarily. Is this normal?
> >>Do I have to get in a real bind to get the fronts to completely lock in
or
> >>do I have a mechanical problem? Thanks in advance!! Don
> >>
> >
> >
>
>

Re: Rubicon Front Locker
 

No, don't hold the button.
Push button once to lock the rear.
Push button again to lock the front.
If you push the button a third time, you will unlock the front only. Each
time you push the button after that, you will toggle the front ONLY on and
off.
To unlock both, pull the button backwards towards the rear of the vehicle.

If the front or rear light is flashing, then that axle is not locked. Gently
drive forward a few feet then backward a few feet. That usually gets them to
lock right away.

Tom

"Don Hamilton" <cdhamil@excite.com> wrote in message
news:12i8jnc8lnq7fe7@corp.supernews.com...
>
> "nawt2smart" <nawt2smart@excite.com> wrote in message
> news:1159988599.725507.205800@m73g2000cwd.googlegr oups.com...
> >
> > Don Hamilton wrote:
>snip
> >
> Do you hold the button until the blinking stops? When I push it twice both
> come on flashing and after a few seconds the rear stops flashing the front
> continues to flash unless I get it in a bind like in a turn then it stops
> flashing until the bind is released. May never use it but just seems odd.
> Thanks for the reply. Don
>
>

Re: Rubicon Front Locker
 

No, don't hold the button.
Push button once to lock the rear.
Push button again to lock the front.
If you push the button a third time, you will unlock the front only. Each
time you push the button after that, you will toggle the front ONLY on and
off.
To unlock both, pull the button backwards towards the rear of the vehicle.

If the front or rear light is flashing, then that axle is not locked. Gently
drive forward a few feet then backward a few feet. That usually gets them to
lock right away.

Tom

"Don Hamilton" <cdhamil@excite.com> wrote in message
news:12i8jnc8lnq7fe7@corp.supernews.com...
>
> "nawt2smart" <nawt2smart@excite.com> wrote in message
> news:1159988599.725507.205800@m73g2000cwd.googlegr oups.com...
> >
> > Don Hamilton wrote:
>snip
> >
> Do you hold the button until the blinking stops? When I push it twice both
> come on flashing and after a few seconds the rear stops flashing the front
> continues to flash unless I get it in a bind like in a turn then it stops
> flashing until the bind is released. May never use it but just seems odd.
> Thanks for the reply. Don
>
>

Re: Rubicon Front Locker
 

No, don't hold the button.
Push button once to lock the rear.
Push button again to lock the front.
If you push the button a third time, you will unlock the front only. Each
time you push the button after that, you will toggle the front ONLY on and
off.
To unlock both, pull the button backwards towards the rear of the vehicle.

If the front or rear light is flashing, then that axle is not locked. Gently
drive forward a few feet then backward a few feet. That usually gets them to
lock right away.

Tom

"Don Hamilton" <cdhamil@excite.com> wrote in message
news:12i8jnc8lnq7fe7@corp.supernews.com...
>
> "nawt2smart" <nawt2smart@excite.com> wrote in message
> news:1159988599.725507.205800@m73g2000cwd.googlegr oups.com...
> >
> > Don Hamilton wrote:
>snip
> >
> Do you hold the button until the blinking stops? When I push it twice both
> come on flashing and after a few seconds the rear stops flashing the front
> continues to flash unless I get it in a bind like in a turn then it stops
> flashing until the bind is released. May never use it but just seems odd.
> Thanks for the reply. Don
>
>