Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   Replacing back light in overhead console ('05 Liberty) (https://www.jeepscanada.com/jeep-mailing-list-32/replacing-back-light-overhead-console-05-liberty-47041/)

Edward L. Dowdy 07-06-2007 10:50 AM

Replacing back light in overhead console ('05 Liberty)
 
The back lighting on some of the controls has gone dark. I find one screw
near the windshield. This nowhere near releases the housing. I really don't
want to rip anything loose. Any tips? (pinging Mike S).

Ed Dowdy
Fithian IL



Kate 07-07-2007 07:04 AM

Re: Replacing back light in overhead console ('05 Liberty)
 
Umm...
Ed...
No warranty left? That rig should have had the 7/75 on it.
I am not trying to be a smart alek here, but have you checked the owner's
manual?

It may also be a fuse... check your destructions for your panel lights and
see if you may have blown one.

Kate
2O|||||||O6 Rubicon


"Edward L. Dowdy" <elIhatespamdowdy@ctscomp.com> wrote in message
news:K5idnaaSQdoZyxPbnZ2dnUVZ_oWdnZ2d@insightbb.co m...
The back lighting on some of the controls has gone dark. I find one screw
near the windshield. This nowhere near releases the housing. I really don't
want to rip anything loose. Any tips? (pinging Mike S).

Ed Dowdy
Fithian IL




Kate 07-07-2007 07:04 AM

Re: Replacing back light in overhead console ('05 Liberty)
 
Umm...
Ed...
No warranty left? That rig should have had the 7/75 on it.
I am not trying to be a smart alek here, but have you checked the owner's
manual?

It may also be a fuse... check your destructions for your panel lights and
see if you may have blown one.

Kate
2O|||||||O6 Rubicon


"Edward L. Dowdy" <elIhatespamdowdy@ctscomp.com> wrote in message
news:K5idnaaSQdoZyxPbnZ2dnUVZ_oWdnZ2d@insightbb.co m...
The back lighting on some of the controls has gone dark. I find one screw
near the windshield. This nowhere near releases the housing. I really don't
want to rip anything loose. Any tips? (pinging Mike S).

Ed Dowdy
Fithian IL




Kate 07-07-2007 07:04 AM

Re: Replacing back light in overhead console ('05 Liberty)
 
Umm...
Ed...
No warranty left? That rig should have had the 7/75 on it.
I am not trying to be a smart alek here, but have you checked the owner's
manual?

It may also be a fuse... check your destructions for your panel lights and
see if you may have blown one.

Kate
2O|||||||O6 Rubicon


"Edward L. Dowdy" <elIhatespamdowdy@ctscomp.com> wrote in message
news:K5idnaaSQdoZyxPbnZ2dnUVZ_oWdnZ2d@insightbb.co m...
The back lighting on some of the controls has gone dark. I find one screw
near the windshield. This nowhere near releases the housing. I really don't
want to rip anything loose. Any tips? (pinging Mike S).

Ed Dowdy
Fithian IL




Kate 07-07-2007 07:04 AM

Re: Replacing back light in overhead console ('05 Liberty)
 
Umm...
Ed...
No warranty left? That rig should have had the 7/75 on it.
I am not trying to be a smart alek here, but have you checked the owner's
manual?

It may also be a fuse... check your destructions for your panel lights and
see if you may have blown one.

Kate
2O|||||||O6 Rubicon


"Edward L. Dowdy" <elIhatespamdowdy@ctscomp.com> wrote in message
news:K5idnaaSQdoZyxPbnZ2dnUVZ_oWdnZ2d@insightbb.co m...
The back lighting on some of the controls has gone dark. I find one screw
near the windshield. This nowhere near releases the housing. I really don't
want to rip anything loose. Any tips? (pinging Mike S).

Ed Dowdy
Fithian IL




Frank_v7.0 07-07-2007 10:54 AM

Re: Replacing back light in overhead console ('05 Liberty)
 
Kate wrote:
> Umm...
> Ed...
> No warranty left? That rig should have had the 7/75 on it.
> I am not trying to be a smart alek here, but have you checked the owner's
> manual?
>
> It may also be a fuse... check your destructions for your panel lights and
> see if you may have blown one.
>
> Kate
> 2O|||||||O6 Rubicon
>
>
> "Edward L. Dowdy" <elIhatespamdowdy@ctscomp.com> wrote in message
> news:K5idnaaSQdoZyxPbnZ2dnUVZ_oWdnZ2d@insightbb.co m...
> The back lighting on some of the controls has gone dark. I find one screw
> near the windshield. This nowhere near releases the housing. I really don't
> want to rip anything loose. Any tips? (pinging Mike S).
>
> Ed Dowdy
> Fithian IL
>
>
>

The '05 Liberty has 3yrs/36k miles "bumper to bumper" and 7/70k on a
limited drive train warranty ($100 deductible). If that vehicle has less
than 36k miles I would certainly take it to the dealer. My '04 Wrangler
has over 36k miles and I just got a new drive shaft and U joints for
$100. Too bad the '07s are just 3/36 only. :-(

--
FRH

Frank_v7.0 07-07-2007 10:54 AM

Re: Replacing back light in overhead console ('05 Liberty)
 
Kate wrote:
> Umm...
> Ed...
> No warranty left? That rig should have had the 7/75 on it.
> I am not trying to be a smart alek here, but have you checked the owner's
> manual?
>
> It may also be a fuse... check your destructions for your panel lights and
> see if you may have blown one.
>
> Kate
> 2O|||||||O6 Rubicon
>
>
> "Edward L. Dowdy" <elIhatespamdowdy@ctscomp.com> wrote in message
> news:K5idnaaSQdoZyxPbnZ2dnUVZ_oWdnZ2d@insightbb.co m...
> The back lighting on some of the controls has gone dark. I find one screw
> near the windshield. This nowhere near releases the housing. I really don't
> want to rip anything loose. Any tips? (pinging Mike S).
>
> Ed Dowdy
> Fithian IL
>
>
>

The '05 Liberty has 3yrs/36k miles "bumper to bumper" and 7/70k on a
limited drive train warranty ($100 deductible). If that vehicle has less
than 36k miles I would certainly take it to the dealer. My '04 Wrangler
has over 36k miles and I just got a new drive shaft and U joints for
$100. Too bad the '07s are just 3/36 only. :-(

--
FRH

Frank_v7.0 07-07-2007 10:54 AM

Re: Replacing back light in overhead console ('05 Liberty)
 
Kate wrote:
> Umm...
> Ed...
> No warranty left? That rig should have had the 7/75 on it.
> I am not trying to be a smart alek here, but have you checked the owner's
> manual?
>
> It may also be a fuse... check your destructions for your panel lights and
> see if you may have blown one.
>
> Kate
> 2O|||||||O6 Rubicon
>
>
> "Edward L. Dowdy" <elIhatespamdowdy@ctscomp.com> wrote in message
> news:K5idnaaSQdoZyxPbnZ2dnUVZ_oWdnZ2d@insightbb.co m...
> The back lighting on some of the controls has gone dark. I find one screw
> near the windshield. This nowhere near releases the housing. I really don't
> want to rip anything loose. Any tips? (pinging Mike S).
>
> Ed Dowdy
> Fithian IL
>
>
>

The '05 Liberty has 3yrs/36k miles "bumper to bumper" and 7/70k on a
limited drive train warranty ($100 deductible). If that vehicle has less
than 36k miles I would certainly take it to the dealer. My '04 Wrangler
has over 36k miles and I just got a new drive shaft and U joints for
$100. Too bad the '07s are just 3/36 only. :-(

--
FRH

Frank_v7.0 07-07-2007 10:54 AM

Re: Replacing back light in overhead console ('05 Liberty)
 
Kate wrote:
> Umm...
> Ed...
> No warranty left? That rig should have had the 7/75 on it.
> I am not trying to be a smart alek here, but have you checked the owner's
> manual?
>
> It may also be a fuse... check your destructions for your panel lights and
> see if you may have blown one.
>
> Kate
> 2O|||||||O6 Rubicon
>
>
> "Edward L. Dowdy" <elIhatespamdowdy@ctscomp.com> wrote in message
> news:K5idnaaSQdoZyxPbnZ2dnUVZ_oWdnZ2d@insightbb.co m...
> The back lighting on some of the controls has gone dark. I find one screw
> near the windshield. This nowhere near releases the housing. I really don't
> want to rip anything loose. Any tips? (pinging Mike S).
>
> Ed Dowdy
> Fithian IL
>
>
>

The '05 Liberty has 3yrs/36k miles "bumper to bumper" and 7/70k on a
limited drive train warranty ($100 deductible). If that vehicle has less
than 36k miles I would certainly take it to the dealer. My '04 Wrangler
has over 36k miles and I just got a new drive shaft and U joints for
$100. Too bad the '07s are just 3/36 only. :-(

--
FRH

Edward L. Dowdy 07-07-2007 01:52 PM

Re: Replacing back light in overhead console ('05 Liberty)
 
Hi Kate,

It had 9 miles on it when we got in February '05. It now has 49K on it.
Warranty was up 13k ago. Wasn't any power train warranty beyond that (was on
the '05 RAM though). I doubt it's a fuse as only the two left buttons aren't
lit. A friend who works for a jeep dealer gave me the scoop on how to get
the housing loose. I saw an '07 Wrangler Sahara the other day I'd like to
have. But I am sick of making payments. Gonna pay the truck and the Jeep off
and be happy for a while! :) Thanks to you and everybody for the replies.

Ed Dowdy
Fithian IL


"Kate" <svtkate@spam.filter> wrote in message
news:OqKji.6960$yD2.961@bignews1.bellsouth.net...
> Umm...
> Ed...
> No warranty left? That rig should have had the 7/75 on it.
> I am not trying to be a smart alek here, but have you checked the owner's
> manual?
>
> It may also be a fuse... check your destructions for your panel lights and
> see if you may have blown one.
>
> Kate
> 2O|||||||O6 Rubicon
>
>
> "Edward L. Dowdy" <elIhatespamdowdy@ctscomp.com> wrote in message
> news:K5idnaaSQdoZyxPbnZ2dnUVZ_oWdnZ2d@insightbb.co m...
> The back lighting on some of the controls has gone dark. I find one screw
> near the windshield. This nowhere near releases the housing. I really

don't
> want to rip anything loose. Any tips? (pinging Mike S).
>
> Ed Dowdy
> Fithian IL
>
>
>





All times are GMT -4. The time now is 03:08 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.05356 seconds with 5 queries