Re: Removing Rear Seat Belts
 

Unfortunately there are two raised tabs to the left and right where the
seat belt attaches to the bracket the torx holds down. No room for vise
grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
for a set of bits for my 3/8" driver. Thanks all.

Frank_v7.0 wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?

--
FRH

Re: Removing Rear Seat Belts
 

Unfortunately there are two raised tabs to the left and right where the
seat belt attaches to the bracket the torx holds down. No room for vise
grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
for a set of bits for my 3/8" driver. Thanks all.

Frank_v7.0 wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?

--
FRH

Re: Removing Rear Seat Belts
 

Unfortunately there are two raised tabs to the left and right where the
seat belt attaches to the bracket the torx holds down. No room for vise
grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
for a set of bits for my 3/8" driver. Thanks all.

Frank_v7.0 wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?

--
FRH

Re: Removing Rear Seat Belts
 

My YJ is a T55, I'm pretty sure.

Frank_v7.0 wrote:
> Unfortunately there are two raised tabs to the left and right where the
> seat belt attaches to the bracket the torx holds down. No room for vise
> grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
> for a set of bits for my 3/8" driver. Thanks all.
>
> Frank_v7.0 wrote:
>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>> to remove the center seat belts and bracket I found what appears to be
>> a huge torx headed bolt holding the assembly down. I've got a few torx
>> screwdrivers, but this is way larger than anything I've got. I suspect
>> I'm going to have to get something to use with my 3/8" driver. Any
>> idea what size this monster is?
>

Re: Removing Rear Seat Belts
 

My YJ is a T55, I'm pretty sure.

Frank_v7.0 wrote:
> Unfortunately there are two raised tabs to the left and right where the
> seat belt attaches to the bracket the torx holds down. No room for vise
> grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
> for a set of bits for my 3/8" driver. Thanks all.
>
> Frank_v7.0 wrote:
>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>> to remove the center seat belts and bracket I found what appears to be
>> a huge torx headed bolt holding the assembly down. I've got a few torx
>> screwdrivers, but this is way larger than anything I've got. I suspect
>> I'm going to have to get something to use with my 3/8" driver. Any
>> idea what size this monster is?
>

Re: Removing Rear Seat Belts
 

My YJ is a T55, I'm pretty sure.

Frank_v7.0 wrote:
> Unfortunately there are two raised tabs to the left and right where the
> seat belt attaches to the bracket the torx holds down. No room for vise
> grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
> for a set of bits for my 3/8" driver. Thanks all.
>
> Frank_v7.0 wrote:
>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>> to remove the center seat belts and bracket I found what appears to be
>> a huge torx headed bolt holding the assembly down. I've got a few torx
>> screwdrivers, but this is way larger than anything I've got. I suspect
>> I'm going to have to get something to use with my 3/8" driver. Any
>> idea what size this monster is?
>

Re: Removing Rear Seat Belts
 

My YJ is a T55, I'm pretty sure.

Frank_v7.0 wrote:
> Unfortunately there are two raised tabs to the left and right where the
> seat belt attaches to the bracket the torx holds down. No room for vise
> grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
> for a set of bits for my 3/8" driver. Thanks all.
>
> Frank_v7.0 wrote:
>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>> to remove the center seat belts and bracket I found what appears to be
>> a huge torx headed bolt holding the assembly down. I've got a few torx
>> screwdrivers, but this is way larger than anything I've got. I suspect
>> I'm going to have to get something to use with my 3/8" driver. Any
>> idea what size this monster is?
>

Re: Removing Rear Seat Belts
 

On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
> --
> FRH

I picked up a T50 to take mine out ('98 TJ though) before I had it
rhino'd.

Re: Removing Rear Seat Belts
 

On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
> --
> FRH

I picked up a T50 to take mine out ('98 TJ though) before I had it
rhino'd.

Re: Removing Rear Seat Belts
 

On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
> --
> FRH

I picked up a T50 to take mine out ('98 TJ though) before I had it
rhino'd.