rear main seal (replacement with one piece seal)
Guest
Posts: n/a
rear main seal (replacement with one piece seal)
I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
is pulled off. The rear main seal is leaking, and I'm not sure if I
actually have to pull the oil pan to put a new one piece seal in. If
I don't have to pull the oil pan etc, do I have to drain the oil or
would the oil level be sitting below the seal when the engine is off?
is pulled off. The rear main seal is leaking, and I'm not sure if I
actually have to pull the oil pan to put a new one piece seal in. If
I don't have to pull the oil pan etc, do I have to drain the oil or
would the oil level be sitting below the seal when the engine is off?
Guest
Posts: n/a
Re: rear main seal (replacement with one piece seal)
Replace the seal while the flywheel is off:
http://www.----------.com/temp/4cylSeal.jpg Oil level is always well below
the crankshaft throws. Usually the oil leak is the rear part of the valve
cover.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
<alexmacpherson@rogers.com> wrote in message
news:1174071860.196955.247090@e1g2000hsg.googlegro ups.com...
> I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
> is pulled off. The rear main seal is leaking, and I'm not sure if I
> actually have to pull the oil pan to put a new one piece seal in. If
> I don't have to pull the oil pan etc, do I have to drain the oil or
> would the oil level be sitting below the seal when the engine is off?
>
--
Posted via a free Usenet account from http://www.teranews.com
http://www.----------.com/temp/4cylSeal.jpg Oil level is always well below
the crankshaft throws. Usually the oil leak is the rear part of the valve
cover.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
<alexmacpherson@rogers.com> wrote in message
news:1174071860.196955.247090@e1g2000hsg.googlegro ups.com...
> I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
> is pulled off. The rear main seal is leaking, and I'm not sure if I
> actually have to pull the oil pan to put a new one piece seal in. If
> I don't have to pull the oil pan etc, do I have to drain the oil or
> would the oil level be sitting below the seal when the engine is off?
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: rear main seal (replacement with one piece seal)
Replace the seal while the flywheel is off:
http://www.----------.com/temp/4cylSeal.jpg Oil level is always well below
the crankshaft throws. Usually the oil leak is the rear part of the valve
cover.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
<alexmacpherson@rogers.com> wrote in message
news:1174071860.196955.247090@e1g2000hsg.googlegro ups.com...
> I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
> is pulled off. The rear main seal is leaking, and I'm not sure if I
> actually have to pull the oil pan to put a new one piece seal in. If
> I don't have to pull the oil pan etc, do I have to drain the oil or
> would the oil level be sitting below the seal when the engine is off?
>
--
Posted via a free Usenet account from http://www.teranews.com
http://www.----------.com/temp/4cylSeal.jpg Oil level is always well below
the crankshaft throws. Usually the oil leak is the rear part of the valve
cover.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
<alexmacpherson@rogers.com> wrote in message
news:1174071860.196955.247090@e1g2000hsg.googlegro ups.com...
> I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
> is pulled off. The rear main seal is leaking, and I'm not sure if I
> actually have to pull the oil pan to put a new one piece seal in. If
> I don't have to pull the oil pan etc, do I have to drain the oil or
> would the oil level be sitting below the seal when the engine is off?
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: rear main seal (replacement with one piece seal)
Replace the seal while the flywheel is off:
http://www.----------.com/temp/4cylSeal.jpg Oil level is always well below
the crankshaft throws. Usually the oil leak is the rear part of the valve
cover.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
<alexmacpherson@rogers.com> wrote in message
news:1174071860.196955.247090@e1g2000hsg.googlegro ups.com...
> I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
> is pulled off. The rear main seal is leaking, and I'm not sure if I
> actually have to pull the oil pan to put a new one piece seal in. If
> I don't have to pull the oil pan etc, do I have to drain the oil or
> would the oil level be sitting below the seal when the engine is off?
>
--
Posted via a free Usenet account from http://www.teranews.com
http://www.----------.com/temp/4cylSeal.jpg Oil level is always well below
the crankshaft throws. Usually the oil leak is the rear part of the valve
cover.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
<alexmacpherson@rogers.com> wrote in message
news:1174071860.196955.247090@e1g2000hsg.googlegro ups.com...
> I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
> is pulled off. The rear main seal is leaking, and I'm not sure if I
> actually have to pull the oil pan to put a new one piece seal in. If
> I don't have to pull the oil pan etc, do I have to drain the oil or
> would the oil level be sitting below the seal when the engine is off?
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: rear main seal (replacement with one piece seal)
On Mar 16, 8:14 pm, "L.W. \(Bill\) ------ III" <billhug...@***.net>
wrote:
> Replace the seal while the flywheel is off:http://www.----------.com/temp/4cylSeal.jpgOil level is always well below
> the crankshaft throws. Usually the oil leak is the rear part of the valve
> cover.
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> <alexmacpher...@rogers.com> wrote in message
>
> news:1174071860.196955.247090@e1g2000hsg.googlegro ups.com...
>
> > I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
> > is pulled off. The rear main seal is leaking, and I'm not sure if I
> > actually have to pull the oil pan to put a new one piece seal in. If
> > I don't have to pull the oil pan etc, do I have to drain the oil or
> > would the oil level be sitting below the seal when the engine is off?
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
Thanks Bill!
Here's a pic of my rear main seal :
http://i5.photobucket.com/albums/y18...k/P3130046.jpg
wrote:
> Replace the seal while the flywheel is off:http://www.----------.com/temp/4cylSeal.jpgOil level is always well below
> the crankshaft throws. Usually the oil leak is the rear part of the valve
> cover.
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> <alexmacpher...@rogers.com> wrote in message
>
> news:1174071860.196955.247090@e1g2000hsg.googlegro ups.com...
>
> > I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
> > is pulled off. The rear main seal is leaking, and I'm not sure if I
> > actually have to pull the oil pan to put a new one piece seal in. If
> > I don't have to pull the oil pan etc, do I have to drain the oil or
> > would the oil level be sitting below the seal when the engine is off?
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
Thanks Bill!
Here's a pic of my rear main seal :
http://i5.photobucket.com/albums/y18...k/P3130046.jpg
Guest
Posts: n/a
Re: rear main seal (replacement with one piece seal)
On Mar 16, 8:14 pm, "L.W. \(Bill\) ------ III" <billhug...@***.net>
wrote:
> Replace the seal while the flywheel is off:http://www.----------.com/temp/4cylSeal.jpgOil level is always well below
> the crankshaft throws. Usually the oil leak is the rear part of the valve
> cover.
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> <alexmacpher...@rogers.com> wrote in message
>
> news:1174071860.196955.247090@e1g2000hsg.googlegro ups.com...
>
> > I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
> > is pulled off. The rear main seal is leaking, and I'm not sure if I
> > actually have to pull the oil pan to put a new one piece seal in. If
> > I don't have to pull the oil pan etc, do I have to drain the oil or
> > would the oil level be sitting below the seal when the engine is off?
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
Thanks Bill!
Here's a pic of my rear main seal :
http://i5.photobucket.com/albums/y18...k/P3130046.jpg
wrote:
> Replace the seal while the flywheel is off:http://www.----------.com/temp/4cylSeal.jpgOil level is always well below
> the crankshaft throws. Usually the oil leak is the rear part of the valve
> cover.
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> <alexmacpher...@rogers.com> wrote in message
>
> news:1174071860.196955.247090@e1g2000hsg.googlegro ups.com...
>
> > I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
> > is pulled off. The rear main seal is leaking, and I'm not sure if I
> > actually have to pull the oil pan to put a new one piece seal in. If
> > I don't have to pull the oil pan etc, do I have to drain the oil or
> > would the oil level be sitting below the seal when the engine is off?
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
Thanks Bill!
Here's a pic of my rear main seal :
http://i5.photobucket.com/albums/y18...k/P3130046.jpg
Guest
Posts: n/a
Re: rear main seal (replacement with one piece seal)
On Mar 16, 8:14 pm, "L.W. \(Bill\) ------ III" <billhug...@***.net>
wrote:
> Replace the seal while the flywheel is off:http://www.----------.com/temp/4cylSeal.jpgOil level is always well below
> the crankshaft throws. Usually the oil leak is the rear part of the valve
> cover.
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> <alexmacpher...@rogers.com> wrote in message
>
> news:1174071860.196955.247090@e1g2000hsg.googlegro ups.com...
>
> > I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
> > is pulled off. The rear main seal is leaking, and I'm not sure if I
> > actually have to pull the oil pan to put a new one piece seal in. If
> > I don't have to pull the oil pan etc, do I have to drain the oil or
> > would the oil level be sitting below the seal when the engine is off?
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
Thanks Bill!
Here's a pic of my rear main seal :
http://i5.photobucket.com/albums/y18...k/P3130046.jpg
wrote:
> Replace the seal while the flywheel is off:http://www.----------.com/temp/4cylSeal.jpgOil level is always well below
> the crankshaft throws. Usually the oil leak is the rear part of the valve
> cover.
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> <alexmacpher...@rogers.com> wrote in message
>
> news:1174071860.196955.247090@e1g2000hsg.googlegro ups.com...
>
> > I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel
> > is pulled off. The rear main seal is leaking, and I'm not sure if I
> > actually have to pull the oil pan to put a new one piece seal in. If
> > I don't have to pull the oil pan etc, do I have to drain the oil or
> > would the oil level be sitting below the seal when the engine is off?
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
Thanks Bill!
Here's a pic of my rear main seal :
http://i5.photobucket.com/albums/y18...k/P3130046.jpg
Thread
Thread Starter
Forum
Replies
Last Post
Monte Castleman
Jeep Mailing List
48
Nov 27, 2003 02:33 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)