Re: Rear diff swap
 

Ditto, especially with that Mickey Mouse front end the Libby has, the
ratios would be wrong for sure.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/


"Earle Horton" <apodo@gracioso.usa> wrote in message
news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
> Find out the track, or wheel to wheel width. If it is the same, chances
are
> this can be done with a little welding. A cheaper alternative might be to
> install a Trak-Loc into the Liberty.
>
> Earle
>
> "Socks" <socks09@shaw.ca> wrote in message
> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
> > Good day,
> >
> > Today I was looking at late a model (2004 I think) Jeep Renagade. It's
> > not so much that I am interested in buying the vehicle itself, but I
> > was wondering if I could swap the rear differential (with the dash
> > controled electronic lock) into my 2004 Jeep Liberty?
> > Any insight would be gratly appreciated
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Re: Rear diff swap
 

Ditto, especially with that Mickey Mouse front end the Libby has, the
ratios would be wrong for sure.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/


"Earle Horton" <apodo@gracioso.usa> wrote in message
news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
> Find out the track, or wheel to wheel width. If it is the same, chances
are
> this can be done with a little welding. A cheaper alternative might be to
> install a Trak-Loc into the Liberty.
>
> Earle
>
> "Socks" <socks09@shaw.ca> wrote in message
> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
> > Good day,
> >
> > Today I was looking at late a model (2004 I think) Jeep Renagade. It's
> > not so much that I am interested in buying the vehicle itself, but I
> > was wondering if I could swap the rear differential (with the dash
> > controled electronic lock) into my 2004 Jeep Liberty?
> > Any insight would be gratly appreciated
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Re: Rear diff swap
 

Ditto, especially with that Mickey Mouse front end the Libby has, the
ratios would be wrong for sure.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/


"Earle Horton" <apodo@gracioso.usa> wrote in message
news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
> Find out the track, or wheel to wheel width. If it is the same, chances
are
> this can be done with a little welding. A cheaper alternative might be to
> install a Trak-Loc into the Liberty.
>
> Earle
>
> "Socks" <socks09@shaw.ca> wrote in message
> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
> > Good day,
> >
> > Today I was looking at late a model (2004 I think) Jeep Renagade. It's
> > not so much that I am interested in buying the vehicle itself, but I
> > was wondering if I could swap the rear differential (with the dash
> > controled electronic lock) into my 2004 Jeep Liberty?
> > Any insight would be gratly appreciated
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Re: Re: Rear diff swap
 

If you read it he says he wants to know about swapping out the
differentail, not the complete rear axle. (it is not very efficent to
swap complete rear axle to get a posi or locker in it unless your
current axle design does not support that option)

On Wed, 25 Apr 2007 11:15:22 -0700, "L.W. \(Bill\) ------ III"
<----------@cox.net> wrote:

> Ditto, especially with that Mickey Mouse front end the Libby has, the
>ratios would be wrong for sure.
> God Bless America, Bill 0|||||||0
>mailto:-------------------- http://www.----------.com/
>
>
>"Earle Horton" <apodo@gracioso.usa> wrote in message
>news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
>> Find out the track, or wheel to wheel width. If it is the same, chances
>are
>> this can be done with a little welding. A cheaper alternative might be to
>> install a Trak-Loc into the Liberty.
>>
>> Earle
>>
>> "Socks" <socks09@shaw.ca> wrote in message
>> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
>> > Good day,
>> >
>> > Today I was looking at late a model (2004 I think) Jeep Renagade. It's
>> > not so much that I am interested in buying the vehicle itself, but I
>> > was wondering if I could swap the rear differential (with the dash
>> > controled electronic lock) into my 2004 Jeep Liberty?
>> > Any insight would be gratly appreciated
>>
>>
-----------------
TheSnoMan.com

Re: Re: Rear diff swap
 

If you read it he says he wants to know about swapping out the
differentail, not the complete rear axle. (it is not very efficent to
swap complete rear axle to get a posi or locker in it unless your
current axle design does not support that option)

On Wed, 25 Apr 2007 11:15:22 -0700, "L.W. \(Bill\) ------ III"
<----------@cox.net> wrote:

> Ditto, especially with that Mickey Mouse front end the Libby has, the
>ratios would be wrong for sure.
> God Bless America, Bill 0|||||||0
>mailto:-------------------- http://www.----------.com/
>
>
>"Earle Horton" <apodo@gracioso.usa> wrote in message
>news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
>> Find out the track, or wheel to wheel width. If it is the same, chances
>are
>> this can be done with a little welding. A cheaper alternative might be to
>> install a Trak-Loc into the Liberty.
>>
>> Earle
>>
>> "Socks" <socks09@shaw.ca> wrote in message
>> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
>> > Good day,
>> >
>> > Today I was looking at late a model (2004 I think) Jeep Renagade. It's
>> > not so much that I am interested in buying the vehicle itself, but I
>> > was wondering if I could swap the rear differential (with the dash
>> > controled electronic lock) into my 2004 Jeep Liberty?
>> > Any insight would be gratly appreciated
>>
>>
-----------------
TheSnoMan.com

Re: Re: Rear diff swap
 

If you read it he says he wants to know about swapping out the
differentail, not the complete rear axle. (it is not very efficent to
swap complete rear axle to get a posi or locker in it unless your
current axle design does not support that option)

On Wed, 25 Apr 2007 11:15:22 -0700, "L.W. \(Bill\) ------ III"
<----------@cox.net> wrote:

> Ditto, especially with that Mickey Mouse front end the Libby has, the
>ratios would be wrong for sure.
> God Bless America, Bill 0|||||||0
>mailto:-------------------- http://www.----------.com/
>
>
>"Earle Horton" <apodo@gracioso.usa> wrote in message
>news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
>> Find out the track, or wheel to wheel width. If it is the same, chances
>are
>> this can be done with a little welding. A cheaper alternative might be to
>> install a Trak-Loc into the Liberty.
>>
>> Earle
>>
>> "Socks" <socks09@shaw.ca> wrote in message
>> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
>> > Good day,
>> >
>> > Today I was looking at late a model (2004 I think) Jeep Renagade. It's
>> > not so much that I am interested in buying the vehicle itself, but I
>> > was wondering if I could swap the rear differential (with the dash
>> > controled electronic lock) into my 2004 Jeep Liberty?
>> > Any insight would be gratly appreciated
>>
>>
-----------------
TheSnoMan.com

Re: Re: Rear diff swap
 

If you read it he says he wants to know about swapping out the
differentail, not the complete rear axle. (it is not very efficent to
swap complete rear axle to get a posi or locker in it unless your
current axle design does not support that option)

On Wed, 25 Apr 2007 11:15:22 -0700, "L.W. \(Bill\) ------ III"
<----------@cox.net> wrote:

> Ditto, especially with that Mickey Mouse front end the Libby has, the
>ratios would be wrong for sure.
> God Bless America, Bill 0|||||||0
>mailto:-------------------- http://www.----------.com/
>
>
>"Earle Horton" <apodo@gracioso.usa> wrote in message
>news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
>> Find out the track, or wheel to wheel width. If it is the same, chances
>are
>> this can be done with a little welding. A cheaper alternative might be to
>> install a Trak-Loc into the Liberty.
>>
>> Earle
>>
>> "Socks" <socks09@shaw.ca> wrote in message
>> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
>> > Good day,
>> >
>> > Today I was looking at late a model (2004 I think) Jeep Renagade. It's
>> > not so much that I am interested in buying the vehicle itself, but I
>> > was wondering if I could swap the rear differential (with the dash
>> > controled electronic lock) into my 2004 Jeep Liberty?
>> > Any insight would be gratly appreciated
>>
>>
-----------------
TheSnoMan.com

Re: Re: Rear diff swap
 

Do you think the Wrangler he was looking at with the external locker
control would fit his garage?
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)



--
Posted via a free Usenet account from http://www.teranews.com

Re: Re: Rear diff swap
 

Do you think the Wrangler he was looking at with the external locker
control would fit his garage?
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)



--
Posted via a free Usenet account from http://www.teranews.com

Re: Re: Rear diff swap
 

Do you think the Wrangler he was looking at with the external locker
control would fit his garage?
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)



--
Posted via a free Usenet account from http://www.teranews.com