Re: T5 acting up
I think I fixed it, I found that the two bolts that hold the clutch
linkage to the bellhousing were loose. Tightened them up and it is back to just needing a little pressure to get in! Whooo Hoo got to love the cheap fixes! In article <aarons48willys-B2E5B6.10133427062003@news2.localnet.com>, Aaron Graham <aarons48willys@NOSPAM.mac.com> wrote: > After going wheeling a month ago my transmission has started acting bad. > I have always had a little hard time getting into first gear, had to > push hard, but no grinding. Now it seems that most of the time I cannot > get it in 1st or 2nd gear with the motor running. If I put it in 3rd > and get it to roll a little then I can get in 1st. It does not grind, > it just feels like something is hitting. I have used ATF in the tranny > since I bought it last fall because that is what the previous owner had > in there, but I know some people(Mike) say to use gear lube. > > Should I try gear lube instead? > Is there an easy way to inspect the internals with out taking the tranny > out, i.e can I see much by taking the top of the tranny? > Could it be clutch related? (but I think that would effect all gears) > > What else should I check? -- Aaron Graham http://homepage.mac.com/aarongraham 1948 Willys & 1979 CJ7 o_o_o_o /| ,[_____], |ŻŻŻL --O|||||||O- ()_)Ż()_) ŻŻŻŻŻ )_) |
All times are GMT -4. The time now is 01:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands