Re: She cranks, She runs, She's fuel injected!!!
 

Congratulations!
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

William Oliveri wrote:
>
> Thanks to all who helped me on this project. I fired up my CJ last night
> after completing the Mopar Fuel Injection kit install and it runs like a
> champ. I needed to adjust a couple of things like the diode being installed
> backwards and the 12 volt source on the wrong pole and a adustment to the
> distributor cap for proper rotor/pole lineup but after that it ran fine.
> Now I still need to close off the Pulse Air exhaust vents which I'll do
> tonight. One thing though I didn't see the great increase in HP that I
> thought I would. I still haven't taken it on the highway yet so we'll see
> as time progresses.
>
> thanks again,
>
> bill

Re: She cranks, She runs, She's fuel injected!!!
 

Where did you buy the mopar unit? Used to see a dealer that had it for
1600.00 but can't remember the name. Also, how much time did it take to
install?

Dan Ferrell
84 CJ

"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:3F6B5BC1.2E536D21@cox.net...
> Congratulations!
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Thanks to all who helped me on this project. I fired up my CJ last
night
> > after completing the Mopar Fuel Injection kit install and it runs like a
> > champ. I needed to adjust a couple of things like the diode being
installed
> > backwards and the 12 volt source on the wrong pole and a adustment to
the
> > distributor cap for proper rotor/pole lineup but after that it ran fine.
> > Now I still need to close off the Pulse Air exhaust vents which I'll do
> > tonight. One thing though I didn't see the great increase in HP that I
> > thought I would. I still haven't taken it on the highway yet so we'll
see
> > as time progresses.
> >
> > thanks again,
> >
> > bill

Re: She cranks, She runs, She's fuel injected!!!
 

Where did you buy the mopar unit? Used to see a dealer that had it for
1600.00 but can't remember the name. Also, how much time did it take to
install?

Dan Ferrell
84 CJ

"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:3F6B5BC1.2E536D21@cox.net...
> Congratulations!
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Thanks to all who helped me on this project. I fired up my CJ last
night
> > after completing the Mopar Fuel Injection kit install and it runs like a
> > champ. I needed to adjust a couple of things like the diode being
installed
> > backwards and the 12 volt source on the wrong pole and a adustment to
the
> > distributor cap for proper rotor/pole lineup but after that it ran fine.
> > Now I still need to close off the Pulse Air exhaust vents which I'll do
> > tonight. One thing though I didn't see the great increase in HP that I
> > thought I would. I still haven't taken it on the highway yet so we'll
see
> > as time progresses.
> >
> > thanks again,
> >
> > bill

Re: She cranks, She runs, She's fuel injected!!!
 

I bought mine used for 1000.00 shipped plus the Balancer used for 80.00
shipped. I had to buy the O2 sensor and some other more minor things.


Acutally it took me over a month but I had to do some modifications to the
exhaust manifold to make that fit properly as the former owner didn't seat
that correctly and then to the power steering bracket to make the aluminum
valve cover fit then a lot of running around to find certian parts. Plus I
had only Half Saturdays and 1 to 2 hours every other night after work.



"Dan Ferrell" <dkf92@bellsouth.net> wrote in message
news:HfKab.611$an.155@bignews6.bellsouth.net...
> Where did you buy the mopar unit? Used to see a dealer that had it for
> 1600.00 but can't remember the name. Also, how much time did it take to
> install?
>
> Dan Ferrell
> 84 CJ
>
> "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> news:3F6B5BC1.2E536D21@cox.net...
> > Congratulations!
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > William Oliveri wrote:
> > >
> > > Thanks to all who helped me on this project. I fired up my CJ last
> night
> > > after completing the Mopar Fuel Injection kit install and it runs like
a
> > > champ. I needed to adjust a couple of things like the diode being
> installed
> > > backwards and the 12 volt source on the wrong pole and a adustment to
> the
> > > distributor cap for proper rotor/pole lineup but after that it ran
fine.
> > > Now I still need to close off the Pulse Air exhaust vents which I'll
do
> > > tonight. One thing though I didn't see the great increase in HP that
I
> > > thought I would. I still haven't taken it on the highway yet so we'll
> see
> > > as time progresses.
> > >
> > > thanks again,
> > >
> > > bill
>
>

Re: She cranks, She runs, She's fuel injected!!!
 

I bought mine used for 1000.00 shipped plus the Balancer used for 80.00
shipped. I had to buy the O2 sensor and some other more minor things.


Acutally it took me over a month but I had to do some modifications to the
exhaust manifold to make that fit properly as the former owner didn't seat
that correctly and then to the power steering bracket to make the aluminum
valve cover fit then a lot of running around to find certian parts. Plus I
had only Half Saturdays and 1 to 2 hours every other night after work.



"Dan Ferrell" <dkf92@bellsouth.net> wrote in message
news:HfKab.611$an.155@bignews6.bellsouth.net...
> Where did you buy the mopar unit? Used to see a dealer that had it for
> 1600.00 but can't remember the name. Also, how much time did it take to
> install?
>
> Dan Ferrell
> 84 CJ
>
> "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> news:3F6B5BC1.2E536D21@cox.net...
> > Congratulations!
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > William Oliveri wrote:
> > >
> > > Thanks to all who helped me on this project. I fired up my CJ last
> night
> > > after completing the Mopar Fuel Injection kit install and it runs like
a
> > > champ. I needed to adjust a couple of things like the diode being
> installed
> > > backwards and the 12 volt source on the wrong pole and a adustment to
> the
> > > distributor cap for proper rotor/pole lineup but after that it ran
fine.
> > > Now I still need to close off the Pulse Air exhaust vents which I'll
do
> > > tonight. One thing though I didn't see the great increase in HP that
I
> > > thought I would. I still haven't taken it on the highway yet so we'll
> see
> > > as time progresses.
> > >
> > > thanks again,
> > >
> > > bill
>
>