Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   Re: How do I get this tie rod end off? (https://www.jeepscanada.com/jeep-mailing-list-32/re-how-do-i-get-tie-rod-end-off-50069/)

Jerry Bransford 11-24-2007 10:05 AM

Re: How do I get this tie rod end off?
 
Soak the threaded tie-rod end with a penetrant like PB-Blaster,
Break-Free, or Liquid Wrench. Spray it a few times and let it soak in

overnight, then see if you can't unscrew it. A pipe wrench is ideal
but
just a big set of waterpump (big) pliers will do it too. These kinds
of
parts are often stuck together so if you get it apart, be sure to
apply
a dab of antiseize compound on the tie rod threads before reassembly
it.
Are you sure the grinding isn't a bad u-joint or perhaps a bad hub?

Jerry

Eric wrote:
> My TJ's been making a lot of noises when steering lately. To the

point I
> could hold my cell phone out the window and the person on the other

end
> could hear the grinding.
>
> After much checking, it seemed that the tie rod end at the drag link

was the
> culprit. To be honest, I can't seem to finger it, but a buddy of

mine
> crawled under there and swore that was the one. If it were left to

me, I'd
> probably have to replace all of the ones on the passenger side.
>
> Anyhow, getting it out of the drag link just took a minute. Piece

of cake.
> Loosened the retainer. Again, easy stuff. The problem is getting

it out of
> the tie rod. I've got a pretty long pipe-wrench on the tie rod end

and
> can't get it to come loose. Seems like the end is stuck in the tie

rod.
> After playing around with the end itself, I just can't see how

that's making
> the noise, though. I put it back (since I can't get it out!) and

wonder if
> the noise isn't another ball joint. I think it could be the joint

at the
> top of the knuckle (the part the caliper attaches to). I know if

you shoot
> grease into that zerk it comes right out of the dust boot.
>
> Any thoughts? How do you get a tie rod end out when it's stuck like

that?
> Honestly, this could be a lack-of-muscle issue, but I had good

leverage.
>
> Eric
> 99 TJ SE
>
>
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/


-------------= Posted from Ugroups.com =-------------
---= Fast & Free Web Portal to Usenet Newsgroups =---
-------------= http://www.ugroups.com/ =-------------



All times are GMT -4. The time now is 08:54 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.05033 seconds with 5 queries