If it isn't the module, change the distributor. I had to change mine after
changing the coil & module.

Thanks

Dave G

www.mostlyjeeps.trekcos.com
mostlyjeeps@***.net

89 Wrangler
Auto
Air
Weber
4.0L Head Conversion
Intense Blue Pearl Cote

2002 Liberty
V6
Auto

1995 Cherokee Sport
4 Door
Black
Auto

www.trekcs.com
"Christian Fry" <fry_christian@hotmail.com> wrote in message
news:jvjPa.16751$Tx.809279@news20.bellglobal.com.. .
> I drive a 1989 Jeep YJ with a carbeurated 258. A few weeks ago, I could
not
> get it started and found that there was no spark from the coil. I replaced
> the coil, still no spark. I have 12v of power going to the coil, and a
good
> ground from the coil, and the same coil worked fine in another engine.
After
> two days of trying to figure it out, it suddenly started working! The only
> thing I changed was the two relays beside the battery, but I am not
> convinced that it made the difference as it ran fine without them
installed
> after it started working. Today, after about 5 minutes of driving, it
pulled
> the same story all over again, and I can't figure it out. IT seems the
coil
> is not getting a pulse, perhaps a steady 12v. The jeep has new wires and
> after testing them on another machine found them to be working fine. Any
> ideas?
>
> Thanks,
> Chris
>
>