That side-to-side axleshaft movement is perfectly normal. It's there
because the axleshafts must be pushed inward so the c-clip can be
accessed and removed for axleshaft removal. No worries

dabend wrote
> 94 YJ 4.0 Dana 3
>
> After 4 wheelin I started to notice a clunking noise coming from m
> rear end when I rock the jeep sideways (rock rollbar). I hav
narrowe
> it down to both axle shafts having alittle play in and out. I pulle
> the axle on one side and have noticed play in the c-clip and axl
> groove. Please see online video
>
> http://www.dabend.com/jeepin%20040.av
>
> Is this play normal? If not, what is worn, clip or shaft?
>
> The shaft teeth are in perfect condition. But, I did notice som
roug
> shavings around the end of the shaft (clip side not wheel). Th
c-cli
> groove seems smooth, just the tip edges. Also, the retaining shaf
> shows no sign of wear. Besides that inside the differential gear
look
> great
>
> Besides throwing the Dana 35 in the garbage, any suggestions so
ca
> keep busy this weekend
>
> Chri
>
>
--
Jerry Bransfor
PP-ASEL N6TA
See the Geezer Jeep a
http://members.***.net/jerrypb


-------------= Posted from Ugroups.com =------------
---= Fast & Free Web Portal to Usenet Newsgroups =--
-------------= http://www.ugroups.com/ =------------