Re: CJ7 plate on the floor where the stick shifts come up
 

I think I'd work on fixing the oil leaks.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Joe wrote:
>
> Is there a gasket for the plate on the floor where the stick shifts come up
> or should I just use a heat-resistent silicon (CJ7)? The past owner used
> some cheap crap and now it leaks (unfortunately, I'm spraying oil on the
> drivesfaft which is throwing it on this place and the oil is getting
> inside).

Re: CJ7 plate on the floor where the stick shifts come up
 

I sealed mine with some kind of putty-tape that is used to seal windows and
doors. I don't know why I bothered, I have no shifter boot and the
transmission is exposed through the hole the shifter goes through.



"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:3F1EF616.D8A64CBF@cox.net...
> I think I'd work on fixing the oil leaks.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Joe wrote:
> >
> > Is there a gasket for the plate on the floor where the stick shifts come
up
> > or should I just use a heat-resistent silicon (CJ7)? The past owner
used
> > some cheap crap and now it leaks (unfortunately, I'm spraying oil on the
> > drivesfaft which is throwing it on this place and the oil is getting
> > inside).

Re: CJ7 plate on the floor where the stick shifts come up
 

working on the leaks... just don't want to get oil all over me in the
interim...
So, is there a seal?

"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:3F1EF616.D8A64CBF@cox.net...
> I think I'd work on fixing the oil leaks.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Joe wrote:
> >
> > Is there a gasket for the plate on the floor where the stick shifts come
up
> > or should I just use a heat-resistent silicon (CJ7)? The past owner
used
> > some cheap crap and now it leaks (unfortunately, I'm spraying oil on the
> > drivesfaft which is throwing it on this place and the oil is getting
> > inside).
>

Re: CJ7 plate on the floor where the stick shifts come up
 

Not on any I have seen.

I would use some high heat RTV. You will need to clean the area really
well or the RTV won't seal.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Joe wrote:
>
> working on the leaks... just don't want to get oil all over me in the
> interim...
> So, is there a seal?
>
> "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> news:3F1EF616.D8A64CBF@cox.net...
> > I think I'd work on fixing the oil leaks.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Joe wrote:
> > >
> > > Is there a gasket for the plate on the floor where the stick shifts come
> up
> > > or should I just use a heat-resistent silicon (CJ7)? The past owner
> used
> > > some cheap crap and now it leaks (unfortunately, I'm spraying oil on the
> > > drivesfaft which is throwing it on this place and the oil is getting
> > > inside).
> >

Re: CJ7 plate on the floor where the stick shifts come up
 

Kinda depend on how bad he is puking out oil. The putty won't hold oil
for long and RTV 'can' be cut with a razor blade knife, then peeled
off. A pain to do, agreed, but...

Mike

Jeff Strickland wrote:
>
> I wouldn't use RTV because I might actually want to take the plate off
> someday. I would use the putty tape that is commonly used to seal around
> doors and windows.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3F1FDE80.465221D6@sympatico.ca...
> > Not on any I have seen.
> >
> > I would use some high heat RTV. You will need to clean the area really
> > well or the RTV won't seal.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Joe wrote:
> > >
> > > working on the leaks... just don't want to get oil all over me in the
> > > interim...
> > > So, is there a seal?
> > >
> > > "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> > > news:3F1EF616.D8A64CBF@cox.net...
> > > > I think I'd work on fixing the oil leaks.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Joe wrote:
> > > > >
> > > > > Is there a gasket for the plate on the floor where the stick shifts
> come
> > > up
> > > > > or should I just use a heat-resistent silicon (CJ7)? The past owner
> > > used
> > > > > some cheap crap and now it leaks (unfortunately, I'm spraying oil on
> the
> > > > > drivesfaft which is throwing it on this place and the oil is getting
> > > > > inside).
> > > >

Re: CJ7 plate on the floor where the stick shifts come up
 

If you really want a temporary fix: Clean up and duct-tape it from below?

Just my 2 cents.
Thom.

"Joe" <jo_ratner@yahoo.com> wrote in message news:<Y7HTa.19005$Mc.1453037@newsread1.prod.itd.ea rthlink.net>...
> working on the leaks... just don't want to get oil all over me in the
> interim...
> So, is there a seal?
>
> "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> news:3F1EF616.D8A64CBF@cox.net...
> > I think I'd work on fixing the oil leaks.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Joe wrote:
> > >
> > > Is there a gasket for the plate on the floor where the stick shifts come
> up
> > > or should I just use a heat-resistent silicon (CJ7)? The past owner
> used
> > > some cheap crap and now it leaks (unfortunately, I'm spraying oil on the
> > > drivesfaft which is throwing it on this place and the oil is getting
> > > inside).
> >

Re: CJ7 plate on the floor where the stick shifts come up
 

(unfortunately, I'm spraying oil on the
>> > > drivesfaft which is throwing it on this place and the oil is getting
>> > > inside).


Is no one going to tell him? CHANGE THE SEAL!!!
It's a pretty simple job, stop the oil leak first, then
do whatever you want to with the cover plate.

Tookie

Re: CJ7 plate on the floor where the stick shifts come up
 

which seal?

"Tookie " <tookie@cox.net> wrote in message
news:3f215f8c.72561843@news.east.cox.net...
> (unfortunately, I'm spraying oil on the
> >> > > drivesfaft which is throwing it on this place and the oil is
getting
> >> > > inside).
>
>
> Is no one going to tell him? CHANGE THE SEAL!!!
> It's a pretty simple job, stop the oil leak first, then
> do whatever you want to with the cover plate.
>
> Tookie
>

Re: CJ7 plate on the floor where the stick shifts come up
 

Hi Joe,
I think you were describing a transfer seal at the yoke of the
front drive shaft, to sling it up to your floor boards. But to be sure,
take it down to the car wash in your old cloths, and pressure wash it,
to more easily see, where it's coming from. I have a leak at the shift
rods that I've been too lazy to fix, but that just leaks straight down
and makes a mess of my driveway, and not the fire hazard as yours is if
it slings to your exhaust pipe too.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Joe wrote:
>
> which seal?