Re: Which axle is better?
 

it is Chry 8 1/4, thought the 3/4 does exist, not sure what it used in
though

the Chry 8 1/4 is better than the Dana35, but not as good as a Dana 44. 96
and older 8 1/4s have 27 axle splines, 97 and newer have 29 (stronger).
Some 96's have 29.

Here is some info I have collected, ordered by relitive strength all
measurement are in inches

Ring Gear Pinion Shaft Pinion Splines Axle Tube
Axle Shaft Axle Splines C-clip
Dana30 7.2 1.375 26 1.16
27 Y
Dana35c 7.562 1.406 26 2.625
1.18 27 N 85-90 Y 90+
Chry 8.25' 96- 8.25 1.625 27 3.0
1.17 27 Y
Chry 8.25' 97+ 8.25 1.625 27 3.0
1.21 29 Y
XJ Dana 44 8.5 1.375 26 2.76
1.31 30 N
FORD 8.8 8.8 1.625 30 3.25
1.32 31 Y
FORD 9 9.0 28
1.33 31
Dana 60 29
GM 10.5 30

Some of this info was from http://www.tractech.com/App4.html

"BNB7" <bnb7@aol.com> wrote in message
news:20030805115334.07566.00000851@mb-m14.aol.com...
> Which axle is better? The Chrysler 8 1/4" or 8 3/4", (I forget which one
it is)
> or the Dana 35?

Re: Which axle is better?
 

8 3/4 came in "A" body dodge, chry, plymouth cars, some trucks. Has 8 3/4 dia ring gear, better
than 8 1/4. Doesnt use C clips. 9" ford is better and more parts available

Gregg

On Tue, 5 Aug 2003 11:58:00 -0700, "Alon :\)" <alonfw@wiedenman.com> wrote:

>it is Chry 8 1/4, thought the 3/4 does exist, not sure what it used in
>though
>
>the Chry 8 1/4 is better than the Dana35, but not as good as a Dana 44. 96
>and older 8 1/4s have 27 axle splines, 97 and newer have 29 (stronger).
>Some 96's have 29.
>
>Here is some info I have collected, ordered by relitive strength all
>measurement are in inches
>
> Ring Gear Pinion Shaft Pinion Splines Axle Tube
>Axle Shaft Axle Splines C-clip
>Dana30 7.2 1.375 26 1.16
>27 Y
>Dana35c 7.562 1.406 26 2.625
>1.18 27 N 85-90 Y 90+
>Chry 8.25' 96- 8.25 1.625 27 3.0
>1.17 27 Y
>Chry 8.25' 97+ 8.25 1.625 27 3.0
>1.21 29 Y
>XJ Dana 44 8.5 1.375 26 2.76
>1.31 30 N
>FORD 8.8 8.8 1.625 30 3.25
>1.32 31 Y
>FORD 9 9.0 28
>1.33 31
>Dana 60 29
>GM 10.5 30
>
>Some of this info was from http://www.tractech.com/App4.html
>
>"BNB7" <bnb7@aol.com> wrote in message
>news:20030805115334.07566.00000851@mb-m14.aol.com...
>> Which axle is better? The Chrysler 8 1/4" or 8 3/4", (I forget which one
>it is)
>> or the Dana 35?
>