Re: alignment of new speed sensor
 

Rotate it until the index points to the markings on the case that
coincide with the # of teeth on the speedo gear. You may have to go a

little one way or the other to get it to work. Mine has never worked
the first time after the couple times I have changed speedo gears.

Jerry

updawaz00@hotmail.com wrote:
> I replaced the speed sensor, I no longer get a code 15 for No
> speed/distance sensor signal, however, I still don't have a output
to
> my speedometer and I still stall when I'm in neutral while slowing
> down.
>
> The only codes I get back are a 12 and a 55.
>
> I heard the term "indexing" the sensor... some alignmnet to the
> housing, anyone know what / how to do this? It appears the sensor
gear
> has meshed ok inside the transfer case.
>
>
> Any ideas on what to try next?
>
> Thanks
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/


-------------= Posted from Ugroups.com =-------------
---= Fast & Free Web Portal to Usenet Newsgroups =---
-------------= http://www.ugroups.com/ =-------------