Qustion re: exhaust replacement
 

The Chilton manual says I need to remove the crossmember / tranny support in
or to replace the exhaust pipe between the manifold and cat conv. Is this
necessary? I'm planning on replacing everything from the cat back anyway.

tia,

--
Mel

96 Cherokee

Re: Qustion re: exhaust replacement
 

No.

--
Billy_Ray@fuseSPAM.net (Remove the SPAM)
2002 WJ Brilliant Black Crystal Pearl Coat
Helping is why we are all here on RAMJ+W, or should be.
..
"Mel P." <mpernice@netzero.com> wrote in message
news:40vi99F1bnqikU1@individual.net...
> The Chilton manual says I need to remove the crossmember / tranny support
> in
> or to replace the exhaust pipe between the manifold and cat conv. Is this
> necessary? I'm planning on replacing everything from the cat back anyway.
>
> tia,
>
> --
> Mel
>
> 96 Cherokee
>
>

Re: Qustion re: exhaust replacement
 

No.

--
Billy_Ray@fuseSPAM.net (Remove the SPAM)
2002 WJ Brilliant Black Crystal Pearl Coat
Helping is why we are all here on RAMJ+W, or should be.
..
"Mel P." <mpernice@netzero.com> wrote in message
news:40vi99F1bnqikU1@individual.net...
> The Chilton manual says I need to remove the crossmember / tranny support
> in
> or to replace the exhaust pipe between the manifold and cat conv. Is this
> necessary? I'm planning on replacing everything from the cat back anyway.
>
> tia,
>
> --
> Mel
>
> 96 Cherokee
>
>

Re: Qustion re: exhaust replacement
 

No.

--
Billy_Ray@fuseSPAM.net (Remove the SPAM)
2002 WJ Brilliant Black Crystal Pearl Coat
Helping is why we are all here on RAMJ+W, or should be.
..
"Mel P." <mpernice@netzero.com> wrote in message
news:40vi99F1bnqikU1@individual.net...
> The Chilton manual says I need to remove the crossmember / tranny support
> in
> or to replace the exhaust pipe between the manifold and cat conv. Is this
> necessary? I'm planning on replacing everything from the cat back anyway.
>
> tia,
>
> --
> Mel
>
> 96 Cherokee
>
>

Re: Qustion re: exhaust replacement
 

It is a very tight fit. I couldn't do it on ours with the vehicle on
the ground, that's for sure.

I took mine to a 'so called' Jeep shop and they put it in on a hoist
without taking off the crossmember, But the jerks snapped my exhaust
manifold while doing it and then lamely said 'they all crack there'...
Gee, ours only lasted 14 years before those jerks went at it....

Brain dead bozos.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)

"Mel P." wrote:
>
> The Chilton manual says I need to remove the crossmember / tranny support in
> or to replace the exhaust pipe between the manifold and cat conv. Is this
> necessary? I'm planning on replacing everything from the cat back anyway.
>
> tia,
>
> --
> Mel
>
> 96 Cherokee

Re: Qustion re: exhaust replacement
 

It is a very tight fit. I couldn't do it on ours with the vehicle on
the ground, that's for sure.

I took mine to a 'so called' Jeep shop and they put it in on a hoist
without taking off the crossmember, But the jerks snapped my exhaust
manifold while doing it and then lamely said 'they all crack there'...
Gee, ours only lasted 14 years before those jerks went at it....

Brain dead bozos.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)

"Mel P." wrote:
>
> The Chilton manual says I need to remove the crossmember / tranny support in
> or to replace the exhaust pipe between the manifold and cat conv. Is this
> necessary? I'm planning on replacing everything from the cat back anyway.
>
> tia,
>
> --
> Mel
>
> 96 Cherokee

Re: Qustion re: exhaust replacement
 

It is a very tight fit. I couldn't do it on ours with the vehicle on
the ground, that's for sure.

I took mine to a 'so called' Jeep shop and they put it in on a hoist
without taking off the crossmember, But the jerks snapped my exhaust
manifold while doing it and then lamely said 'they all crack there'...
Gee, ours only lasted 14 years before those jerks went at it....

Brain dead bozos.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)

"Mel P." wrote:
>
> The Chilton manual says I need to remove the crossmember / tranny support in
> or to replace the exhaust pipe between the manifold and cat conv. Is this
> necessary? I'm planning on replacing everything from the cat back anyway.
>
> tia,
>
> --
> Mel
>
> 96 Cherokee

Re: Qustion re: exhaust replacement
 

Exhaust jobs are WAY easier if you take the time to get everything out
of the way and have the proper tools (a torch).

Otherwise it's just self-torture.

Re: Qustion re: exhaust replacement
 

Exhaust jobs are WAY easier if you take the time to get everything out
of the way and have the proper tools (a torch).

Otherwise it's just self-torture.

Re: Qustion re: exhaust replacement
 

Exhaust jobs are WAY easier if you take the time to get everything out
of the way and have the proper tools (a torch).

Otherwise it's just self-torture.